Hi,
On Fri, Mar 25, 2022 at 8:42 AM Stephen Boyd <swboyd@xxxxxxxxxxxx> wrote:
>
> Quoting Douglas Anderson (2022-03-25 08:11:05)
> > The L2C rail on herobrine boards is intended to go to the audio
> > codec. Let's override the 1.62V specified in the qcard.dtsi file to be
> > 1.8V.
> >
> > Signed-off-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
> > ---
>
> Reviewed-by: Stephen Boyd <swboyd@xxxxxxxxxxxx>
>
> >
> > arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi | 10 ++++++++++
> > 1 file changed, 10 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
> > index dc17f2079695..c2075f3e7c4b 100644
> > --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
> > +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
> > @@ -339,6 +339,16 @@ keyboard_backlight: keyboard-backlight {
> > ts_avdd: &pp3300_left_in_mlb {};
> > vreg_edp_3p3: &pp3300_left_in_mlb {};
> >
> > +/* Regulator overrides from Qcard */
>
> This one isn't in ALL CAPS? :)
Yeah, I guess it sorta felt like it was a sub-part of the previous
section since it was also adjusting Qcard regulators, but you're right
that it's not actually a board-local name. What about if I change the
section heading for "BOARD-LOCAL NAMES FOR REGULATORS THAT CONNECT TO
QCARD" to:
/*
* ADJUSTMENTS TO QCARD REGULATORS
*
* Mostly this is just board-local names for regulators that come from
* Qcard, but this also has some minor regulator overrides.
*
* Names are only listed here if regulators go somewhere other than a
* testpoint.
*/
I'll wait a few days and then send a v2 if that sounds OK.
-Doug
