On Mon 21 Mar 08:33 CDT 2022, Luca Weiss wrote:
> In other places the SDC and UFS pins have been swapped but this was
> missed in the PINCTRL_PIN definitions. Fix that.
>
> Fixes: 7d74b55afd27 ("pinctrl: qcom: Add SM6350 pinctrl driver")
> Signed-off-by: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
Your proposed change looks good, but when I look at 7d74b55afd27 it
already has these entries in the correct order.
Can you please confirm that this is still applicable. Or help me see
what I am missing.
Regards,
Bjorn
> ---
> Changes in v2:
> - nothing
>
> drivers/pinctrl/qcom/pinctrl-sm6350.c | 16 ++++++++--------
> 1 file changed, 8 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/pinctrl/qcom/pinctrl-sm6350.c b/drivers/pinctrl/qcom/pinctrl-sm6350.c
> index 4d37b817b232..a91a86628f2f 100644
> --- a/drivers/pinctrl/qcom/pinctrl-sm6350.c
> +++ b/drivers/pinctrl/qcom/pinctrl-sm6350.c
> @@ -264,14 +264,14 @@ static const struct pinctrl_pin_desc sm6350_pins[] = {
> PINCTRL_PIN(153, "GPIO_153"),
> PINCTRL_PIN(154, "GPIO_154"),
> PINCTRL_PIN(155, "GPIO_155"),
> - PINCTRL_PIN(156, "SDC1_RCLK"),
> - PINCTRL_PIN(157, "SDC1_CLK"),
> - PINCTRL_PIN(158, "SDC1_CMD"),
> - PINCTRL_PIN(159, "SDC1_DATA"),
> - PINCTRL_PIN(160, "SDC2_CLK"),
> - PINCTRL_PIN(161, "SDC2_CMD"),
> - PINCTRL_PIN(162, "SDC2_DATA"),
> - PINCTRL_PIN(163, "UFS_RESET"),
> + PINCTRL_PIN(156, "UFS_RESET"),
> + PINCTRL_PIN(157, "SDC1_RCLK"),
> + PINCTRL_PIN(158, "SDC1_CLK"),
> + PINCTRL_PIN(159, "SDC1_CMD"),
> + PINCTRL_PIN(160, "SDC1_DATA"),
> + PINCTRL_PIN(161, "SDC2_CLK"),
> + PINCTRL_PIN(162, "SDC2_CMD"),
> + PINCTRL_PIN(163, "SDC2_DATA"),
> };
>
> #define DECLARE_MSM_GPIO_PINS(pin) \
> --
> 2.35.1
>
