Re: [PATCH v5 5/9] drm/msm/dp: Add eDP support via aux_bus

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Quoting Sankeerth Billakanti (2022-03-16 10:35:50)
>         This patch adds support for generic eDP sink through aux_bus.

Please unindent commit text paragraphs. This isn't a book.

> The eDP/DP controller driver should support aux transactions originating
> from the panel-edp driver and hence should be initialized and ready.
>
>         The panel bridge supporting the panel should be ready before
> the bridge connector is initialized. The generic panel probe needs the
> controller resources to be enabled to support aux tractions originating

s/tractions/transactions/

> from it. So, the host_init and phy_init are moved to execute before the
> panel probe.
>
>         The host_init has to return early if the core is already
> initialized so that the regulator and clock votes for the controller
> resources are balanced.
>
>         EV_HPD_INIT_SETUP needs to execute immediately to enable the
> interrupts for the aux transactions from panel-edp to get the modes
> supported.

There are a lot of things going on in this patch. Can it be split up?

>
> Signed-off-by: Sankeerth Billakanti <quic_sbillaka@xxxxxxxxxxx>
> ---
>  drivers/gpu/drm/msm/dp/dp_display.c | 65 +++++++++++++++++++++++++++++++++++--
>  drivers/gpu/drm/msm/dp/dp_drm.c     | 10 +++---
>  drivers/gpu/drm/msm/dp/dp_parser.c  | 21 +-----------
>  drivers/gpu/drm/msm/dp/dp_parser.h  |  1 +
>  4 files changed, 70 insertions(+), 27 deletions(-)
>
> diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c
> index 382b3aa..688bbed 100644
> --- a/drivers/gpu/drm/msm/dp/dp_display.c
> +++ b/drivers/gpu/drm/msm/dp/dp_display.c
> @@ -10,6 +10,7 @@
>  #include <linux/component.h>
>  #include <linux/of_irq.h>
>  #include <linux/delay.h>
> +#include <drm/drm_dp_aux_bus.h>
>
>  #include "msm_drv.h"
>  #include "msm_kms.h"
> @@ -265,8 +266,6 @@ static int dp_display_bind(struct device *dev, struct device *master,
>                 goto end;
>         }
>
> -       dp->dp_display.next_bridge = dp->parser->next_bridge;
> -
>         dp->aux->drm_dev = drm;
>         rc = dp_aux_register(dp->aux);
>         if (rc) {
> @@ -421,6 +420,11 @@ static void dp_display_host_init(struct dp_display_private *dp)
>                 dp->dp_display.connector_type, dp->core_initialized,
>                 dp->phy_initialized);
>
> +       if (dp->core_initialized) {
> +               DRM_DEBUG_DP("DP core already initialized\n");
> +               return;
> +       }
> +
>         dp_power_init(dp->power, false);
>         dp_ctrl_reset_irq_ctrl(dp->ctrl, true);
>         dp_aux_init(dp->aux);
> @@ -433,6 +437,11 @@ static void dp_display_host_deinit(struct dp_display_private *dp)
>                 dp->dp_display.connector_type, dp->core_initialized,
>                 dp->phy_initialized);
>
> +       if (!dp->core_initialized) {
> +               DRM_DEBUG_DP("DP core not initialized\n");
> +               return;
> +       }
> +
>         dp_ctrl_reset_irq_ctrl(dp->ctrl, false);
>         dp_aux_deinit(dp->aux);
>         dp_power_deinit(dp->power);
> @@ -1502,7 +1511,7 @@ void msm_dp_irq_postinstall(struct msm_dp *dp_display)
>
>         dp_hpd_event_setup(dp);
>
> -       dp_add_event(dp, EV_HPD_INIT_SETUP, 0, 100);
> +       dp_add_event(dp, EV_HPD_INIT_SETUP, 0, 0);
>  }
>
>  void msm_dp_debugfs_init(struct msm_dp *dp_display, struct drm_minor *minor)
> @@ -1524,6 +1533,52 @@ void msm_dp_debugfs_init(struct msm_dp *dp_display, struct drm_minor *minor)
>         }
>  }
>
> +static int dp_display_get_next_bridge(struct msm_dp *dp)
> +{
> +       int rc = 0;

Drop initialization.

> +       struct dp_display_private *dp_priv;
> +       struct device_node *aux_bus;
> +       struct device *dev;
> +
> +       dp_priv = container_of(dp, struct dp_display_private, dp_display);
> +       dev = &dp_priv->pdev->dev;
> +       aux_bus = of_get_child_by_name(dev->of_node, "aux-bus");
> +
> +       if (aux_bus) {
> +               dp_display_host_init(dp_priv);
> +               dp_catalog_ctrl_hpd_config(dp_priv->catalog);
> +               enable_irq(dp_priv->irq);
> +               dp_display_host_phy_init(dp_priv);
> +
> +               devm_of_dp_aux_populate_ep_devices(dp_priv->aux);
> +
> +               disable_irq(dp_priv->irq);

Why do we disable irq?

> +       }

The aux_bus node leaked.

> +
> +       /*
> +        * External bridges are mandatory for eDP interfaces: one has to
> +        * provide at least an eDP panel (which gets wrapped into panel-bridge).
> +        *
> +        * For DisplayPort interfaces external bridges are optional, so
> +        * silently ignore an error if one is not present (-ENODEV).
> +        */
> +       rc = dp_parser_find_next_bridge(dp_priv->parser);
> +       if (rc == -ENODEV) {
> +               if (dp->connector_type == DRM_MODE_CONNECTOR_eDP) {
> +                       DRM_ERROR("eDP: next bridge is not present\n");
> +                       return rc;
> +               }
> +       } else if (rc) {
> +               if (rc != -EPROBE_DEFER)
> +                       DRM_ERROR("DP: error parsing next bridge: %d\n", rc);
> +               return rc;
> +       }
> +
> +       dp->next_bridge = dp_priv->parser->next_bridge;
> +
> +       return 0;
> +}
> +
>  int msm_dp_modeset_init(struct msm_dp *dp_display, struct drm_device *dev,
>                         struct drm_encoder *encoder)
>  {
> @@ -1547,6 +1602,10 @@ int msm_dp_modeset_init(struct msm_dp *dp_display, struct drm_device *dev,
>
>         dp_display->encoder = encoder;
>
> +       ret = dp_display_get_next_bridge(dp_display);

Didn't we just move bridge attachment out of modeset? Why is it being
done here?

> +       if (ret)
> +               return ret;
> +
>         dp_display->bridge = dp_bridge_init(dp_display, dev, encoder);
>         if (IS_ERR(dp_display->bridge)) {
>                 ret = PTR_ERR(dp_display->bridge);
> diff --git a/drivers/gpu/drm/msm/dp/dp_drm.c b/drivers/gpu/drm/msm/dp/dp_drm.c
> index 7ce1aca..5254bd6 100644
> --- a/drivers/gpu/drm/msm/dp/dp_drm.c
> +++ b/drivers/gpu/drm/msm/dp/dp_drm.c
> @@ -114,10 +114,12 @@ struct drm_bridge *dp_bridge_init(struct msm_dp *dp_display, struct drm_device *
>         bridge->funcs = &dp_bridge_ops;
>         bridge->type = dp_display->connector_type;
>
> -       bridge->ops =
> -               DRM_BRIDGE_OP_DETECT |
> -               DRM_BRIDGE_OP_HPD |
> -               DRM_BRIDGE_OP_MODES;
> +       if (bridge->type == DRM_MODE_CONNECTOR_DisplayPort) {

Why can't eDP have bridge ops that are the same?

> +               bridge->ops =
> +                       DRM_BRIDGE_OP_DETECT |
> +                       DRM_BRIDGE_OP_HPD |
> +                       DRM_BRIDGE_OP_MODES;
> +       }
>
>         rc = drm_bridge_attach(encoder, bridge, NULL, DRM_BRIDGE_ATTACH_NO_CONNECTOR);
>         if (rc) {



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux