[PATCH v5 0/9] Add support for the eDP panel on sc7280 CRD

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This series adds support for eDP on sc7280 CRD platform.

These changes are dependent on the following series in order:
https://patchwork.kernel.org/project/linux-arm-msm/list/?series=620127&state=*
https://patchwork.kernel.org/project/linux-arm-msm/list/?series=616587&state=*
https://patchwork.kernel.org/project/linux-arm-msm/list/?series=613654&state=*

Sankeerth Billakanti (9):
  arm64: dts: qcom: sc7280: rename edp_out label to mdss_edp_out
  arm64: dts: qcom: sc7280: Add support for eDP panel on CRD
  arm64: dts: qcom: sc7280: Enable backlight for eDP panel
  drm/panel-edp: add LQ140M1JW46 edp panel entry
  drm/msm/dp: Add eDP support via aux_bus
  drm/msm/dp: wait for hpd high before any sink interaction
  drm/msm/dp: Support only IRQ_HPD and REPLUG interrupts for eDP
  drm/msm/dp: Handle eDP mode_valid case
  drm/msm/dp: Support edp/dp without hpd

 arch/arm64/boot/dts/qcom/sc7280-crd.dts | 111 ++++++++++++++++++++++++++++++++
 arch/arm64/boot/dts/qcom/sc7280.dtsi    |   2 +-
 drivers/gpu/drm/msm/dp/dp_aux.c         |   6 ++
 drivers/gpu/drm/msm/dp/dp_catalog.c     |  38 ++++++++---
 drivers/gpu/drm/msm/dp/dp_catalog.h     |   1 +
 drivers/gpu/drm/msm/dp/dp_display.c     |  95 +++++++++++++++++++++++++--
 drivers/gpu/drm/msm/dp/dp_drm.c         |  10 +--
 drivers/gpu/drm/msm/dp/dp_parser.c      |  21 +-----
 drivers/gpu/drm/msm/dp/dp_parser.h      |   1 +
 drivers/gpu/drm/msm/dp/dp_reg.h         |   7 +-
 drivers/gpu/drm/panel/panel-edp.c       |   1 +
 11 files changed, 254 insertions(+), 39 deletions(-)

-- 
2.7.4




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux