Update the fingerprint node on Herobrine to match the fingerprint DT binding. This will allow us to drive the reset and boot gpios from the driver when it is re-attached after flashing. We'll also be able to boot the fingerprint processor if the BIOS isn't doing it for us. Cc: Douglas Anderson <dianders@xxxxxxxxxxxx> Cc: Matthias Kaehlcke <mka@xxxxxxxxxxxx> Cc: Alexandru M Stan <amstan@xxxxxxxxxxxx> Signed-off-by: Stephen Boyd <swboyd@xxxxxxxxxxxx> --- Depends on https://lore.kernel.org/r/20220317005814.2496302-1-swboyd@xxxxxxxxxxxx arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi index 984a7faf0888..282dda78ba3f 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi @@ -396,13 +396,16 @@ ap_spi_fp: &spi9 { cs-gpios = <&tlmm 39 GPIO_ACTIVE_LOW>; cros_ec_fp: ec@0 { - compatible = "google,cros-ec-spi"; + compatible = "google,cros-ec-fp"; reg = <0>; interrupt-parent = <&tlmm>; interrupts = <61 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default"; pinctrl-0 = <&fp_to_ap_irq_l>, <&fp_rst_l>, <&fpmcu_boot0>; + boot0-gpios = <&tlmm 68 GPIO_ACTIVE_HIGH>; + reset-gpios = <&tlmm 78 GPIO_ACTIVE_LOW>; spi-max-frequency = <3000000>; + vdd-supply = <&pp3300_fp_mcu>; }; }; -- https://chromeos.dev
