Add multiple binding for cpu node, l2 node and add idle-states definition for ipq8064 dtsi. Signed-off-by: Ansuel Smith <ansuelsmth@xxxxxxxxx> Tested-by: Jonathan McDowell <noodles@xxxxxxxx> --- arch/arm/boot/dts/qcom-ipq8064.dtsi | 36 +++++++++++++++++++++++++++++ 1 file changed, 36 insertions(+) diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi index 629e22236f5b..1079572f4f5d 100644 --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi @@ -30,6 +30,16 @@ cpu0: cpu@0 { next-level-cache = <&L2>; qcom,acc = <&acc0>; qcom,saw = <&saw0>; + clocks = <&kraitcc 0>, <&kraitcc 4>; + clock-names = "cpu", "l2"; + clock-latency = <100000>; + cpu-supply = <&smb208_s2a>; + operating-points-v2 = <&opp_table0>; + voltage-tolerance = <5>; + cooling-min-state = <0>; + cooling-max-state = <10>; + #cooling-cells = <2>; + cpu-idle-states = <&CPU_SPC>; }; cpu1: cpu@1 { @@ -40,11 +50,37 @@ cpu1: cpu@1 { next-level-cache = <&L2>; qcom,acc = <&acc1>; qcom,saw = <&saw1>; + clocks = <&kraitcc 1>, <&kraitcc 4>; + clock-names = "cpu", "l2"; + clock-latency = <100000>; + cpu-supply = <&smb208_s2b>; + operating-points-v2 = <&opp_table0>; + voltage-tolerance = <5>; + cooling-min-state = <0>; + cooling-max-state = <10>; + #cooling-cells = <2>; + cpu-idle-states = <&CPU_SPC>; + }; + + idle-states { + CPU_SPC: spc { + compatible = "qcom,idle-state-spc"; + status = "disabled"; + entry-latency-us = <400>; + exit-latency-us = <900>; + min-residency-us = <3000>; + }; }; L2: l2-cache { compatible = "cache"; cache-level = <2>; + qcom,saw = <&saw_l2>; + + clocks = <&kraitcc 4>; + clock-names = "l2"; + l2-supply = <&smb208_s1a>; + operating-points-v2 = <&opp_table_l2>; }; }; -- 2.34.1