[PATCH 0/8] Add ethernet support for Qualcomm SA8155p-ADP board

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The SA8155p-ADP board supports on-board ethernet (Gibabit Interface),
with support for both RGMII and RMII buses.

This patchset adds the support for the same.

Note that this patchset is based on an earlier sent patchset
for adding PDC controller support on SM8150 (see [1]).

[1]. https://lore.kernel.org/linux-arm-msm/20220119203133.467264-1-bhupesh.sharma@xxxxxxxxxx/T

Bhupesh Sharma (3):
  clk: qcom: gcc: Add PCIe, EMAC and UFS GDSCs for SM8150
  clk: qcom: gcc-sm8150: use runtime PM for the clock controller
  clk: qcom: gcc-sm8150: Use PWRSTS_ON (only) as a workaround for emac
    gdsc

Bjorn Andersson (1):
  net: stmmac: dwmac-qcom-ethqos: Adjust rgmii loopback_en per platform

Vinod Koul (4):
  dt-bindings: net: qcom,ethqos: Document SM8150 SoC compatible
  net: stmmac: Add support for SM8150
  arm64: dts: qcom: sm8150: add ethernet node
  arm64: dts: qcom: sa8155p-adp: Enable ethernet node

 .../devicetree/bindings/net/qcom,ethqos.txt   |   4 +-
 arch/arm64/boot/dts/qcom/sa8155p-adp.dts      | 144 ++++++++++++++++++
 arch/arm64/boot/dts/qcom/sm8150.dtsi          |  27 ++++
 drivers/clk/qcom/gcc-sm8150.c                 | 105 +++++++++++--
 .../stmicro/stmmac/dwmac-qcom-ethqos.c        |  37 ++++-
 include/dt-bindings/clock/qcom,gcc-sm8150.h   |   9 +-
 6 files changed, 305 insertions(+), 21 deletions(-)

-- 
2.34.1




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux