On Wed, 26 Jan 2022 19:32:48 +0100, michael.srba@xxxxxxxxx wrote: > From: Michael Srba <Michael.Srba@xxxxxxxxx> > > This patch adds bindings for the AHB bus which exposes the SCC block in > the global address space. This bus (and the SSC block itself) is present > on certain qcom SoCs. > > In typical configuration, this bus (as some of the clocks and registers > that we need to manipulate) is not accessible to the OS, and the > resources on this bus are indirectly accessed by communicating with a > hexagon CPU core residing in the SSC block. In this configuration, the > hypervisor is the one performing the bus initialization for the purposes > of bringing the haxagon CPU core out of reset. > > However, it is possible to change the configuration, in which case this > binding serves to allow the OS to initialize the bus. > > Signed-off-by: Michael Srba <Michael.Srba@xxxxxxxxx> > --- > CHANGES: > - v2: fix issues caught by by dt-schema > - v3: none > - v4: address the issues pointed out in the review > --- > .../bindings/bus/qcom,ssc-block-bus.yaml | 150 ++++++++++++++++++ > 1 file changed, 150 insertions(+) > create mode 100644 Documentation/devicetree/bindings/bus/qcom,ssc-block-bus.yaml > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: ./Documentation/devicetree/bindings/bus/qcom,ssc-block-bus.yaml:86:9: [warning] wrong indentation: expected 10 but found 8 (indentation) dtschema/dtc warnings/errors: Documentation/devicetree/bindings/bus/qcom,ssc-block-bus.example.dt.yaml:0:0: /example-0/soc/bus@10ac008/pinctrl@5e10000: failed to match any schema with compatible: ['qcom,msm8998-ssc-tlmm-pinctrl'] doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/patch/1584622 This check can fail if there are any dependencies. The base for a patch series is generally the most recent rc1. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit.
