Distinguish which headset codec is on the board by codec_dai->name instead of card->name. It fixes the crash of being unable to handle kernel paging requests at virtual address ADDR by initializing the correct audio codec on the board. Call stack of the crash: ``` Unable to handle kernel paging request at virtual address ... ... Call trace: rt5682_set_component_pll+0xcc/0xb78 [snd_soc_rt5682] snd_soc_component_set_pll+0x90/0x154 snd_soc_dai_set_pll+0xf4/0x1ac sc7180_snd_startup+0x268/0x3c0 [snd_soc_sc7180] snd_soc_link_startup+0xa4/0x180 soc_pcm_open+0x35c/0x15c8 snd_pcm_open_substream+0xa90/0x13b0 snd_pcm_open+0x1a4/0x55c snd_pcm_capture_open+0x7c/0xe8 snd_open+0x2b8/0x2e4 chrdev_open+0x364/0x3d4 do_dentry_open+0x66c/0xc58 vfs_open+0x7c/0x8c path_openat+0x108c/0x2bbc do_filp_open+0x15c/0x258 do_sys_open+0x278/0x62c __arm64_compat_sys_openat+0x9c/0xb0 ... ``` Fixes: 425c5fce8a03 ("ASoC: qcom: Add support for ALC5682I-VS codec") Signed-off-by: Judy Hsiao <judyhsiao@xxxxxxxxxxxx> --- sound/soc/qcom/sc7180.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/soc/qcom/sc7180.c b/sound/soc/qcom/sc7180.c index 2fff764a00a7..37225ef2563a 100644 --- a/sound/soc/qcom/sc7180.c +++ b/sound/soc/qcom/sc7180.c @@ -131,13 +131,13 @@ static int sc7180_snd_startup(struct snd_pcm_substream *substream) struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0); int pll_id, pll_source, pll_in, pll_out, clk_id, ret; - if (!(strcmp(card->name, "sc7180-rt5682-max98357a-1mic"))) { + if (!strcmp(codec_dai->name, "rt5682-aif1")) { pll_source = RT5682_PLL1_S_MCLK; pll_id = 0; clk_id = RT5682_SCLK_S_PLL1; pll_out = RT5682_PLL1_FREQ; pll_in = DEFAULT_MCLK_RATE; - } else if (!(strcmp(card->name, "sc7180-rt5682s-max98357a-1mic"))) { + } else if (!strcmp(codec_dai->name, "rt5682s-aif1")) { pll_source = RT5682S_PLL_S_MCLK; pll_id = RT5682S_PLL2; clk_id = RT5682S_SCLK_S_PLL2; -- 2.31.0