Sort clocks and interrupts as specified in the docs and remove the stray
property #power-domain-cells from aoss_qmp to solve dtbs_check
validation errors.
Signed-off-by: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sm6350.dtsi | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi
index a7158fe9e192..8322a981cdfc 100644
--- a/arch/arm64/boot/dts/qcom/sm6350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi
@@ -810,10 +810,10 @@ usb_1_qmpphy: phy@88e9000 {
ranges;
clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
+ <&xo_board>,
<&rpmhcc RPMH_QLINK_CLK>,
- <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
- <&xo_board>;
- clock-names = "aux", "ref", "com_aux", "cfg_ahb";
+ <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
+ clock-names = "aux", "cfg_ahb", "ref", "com_aux";
resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>,
<&gcc GCC_USB3_PHY_PRIM_BCR>;
@@ -871,11 +871,12 @@ usb_1: usb@a6f8800 {
"sleep";
interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
- <&pdc 14 IRQ_TYPE_EDGE_BOTH>,
+ <&pdc 17 IRQ_TYPE_LEVEL_HIGH>,
<&pdc 15 IRQ_TYPE_EDGE_BOTH>,
- <&pdc 17 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "hs_phy_irq", "dp_hs_phy_irq",
- "dm_hs_phy_irq", "ss_phy_irq";
+ <&pdc 14 IRQ_TYPE_EDGE_BOTH>;
+
+ interrupt-names = "hs_phy_irq", "ss_phy_irq",
+ "dm_hs_phy_irq", "dp_hs_phy_irq";
power-domains = <&gcc USB30_PRIM_GDSC>;
@@ -935,7 +936,6 @@ aoss_qmp: power-controller@c300000 {
mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>;
#clock-cells = <0>;
- #power-domain-cells = <1>;
};
spmi_bus: spmi@c440000 {
--
2.34.1
