This series adds compatibles to the dt-bindings documentation where it was missed before. Finally, the last patch solves some further dtbs_check errors by modifying the sm6350.dtsi to match the binding docs more closely. Please note, that the first patch from Konrad is a resend that wasn't picked up when sent to the lists in August 2021. Konrad Dybcio (1): dt-bindings: arm: msm: Add LLCC for SM6350 Luca Weiss (9): dt-bindings: firmware: scm: Add SM6350 compatible dt-bindings: qcom,pdc: Add SM6350 compatible dt-bindings: phy: qcom,qusb2: Add SM6350 compatible dt-bindings: thermal: tsens: Add SM6350 compatible dt-bindings: usb: qcom,dwc3: Add SM6350 compatible dt-bindings: watchdog: Add SM6350 and SM8250 compatible dt-bindings: arm: msm: Don't mark LLCC interrupt as required dt-bindings: simple-framebuffer: allow standalone compatible arm64: dts: qcom: sm6350: Fix validation errors .../devicetree/bindings/arm/msm/qcom,llcc.yaml | 2 +- .../bindings/display/simple-framebuffer.yaml | 12 +++++++----- .../devicetree/bindings/firmware/qcom,scm.txt | 1 + .../bindings/interrupt-controller/qcom,pdc.txt | 5 +++-- .../devicetree/bindings/phy/qcom,qusb2-phy.yaml | 1 + .../devicetree/bindings/thermal/qcom-tsens.yaml | 1 + .../devicetree/bindings/usb/qcom,dwc3.yaml | 1 + .../devicetree/bindings/watchdog/qcom-wdt.yaml | 2 ++ arch/arm64/boot/dts/qcom/sm6350.dtsi | 16 ++++++++-------- 9 files changed, 25 insertions(+), 16 deletions(-) -- 2.34.1
