Re: [PATCH 3/3] regulator: qcom-rpm: Regulator driver for the Qualcomm RPM

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, May 29, 2014 at 02:59:38PM -0700, Bjorn Andersson wrote:
> On Thu, May 29, 2014 at 2:18 PM, Mark Brown <broonie@xxxxxxxxxx> wrote:

> > No, this is awful and there's no way in hell that stuff like this should
> > be implemented in a driver since there's clearly nothing at all hardware
> > specific about it.  The load tracking needs to be implemented in the
> > framework if it's going to be implemented, and passing it up through the
> > chain is obviously going to need some conversion and accounting for
> > hardware conversion losses which doesn't seem to be happening here.
> >
> > I'm still unclear on what the summed current is going to be used for,
> > though...

> You do load accumlation of all the requests from the drivers of the Linux
> system, but in the Qualcomm system there might be load from the modem or the
> sensor co-processor that we don't know about here. So additional accumulation
> is done by the "pmic" - that is directly accessed by those other systems as
> well.

So the resulting load is then set directly in hardware instead of
setting a mode?  That would be totally fine but it doesn't free us from
having the logic for accumilating the current we know about in the core;
that's the bit that's just at completely the wrong abstraction layer.

> I understand your strong opinions regarding this, so I will respin this to
> forcefully set the regulator mode intead of merely casting a vote.  I.e.
> implement set_mode to actually set the mode.

Or just don't implement mode setting if it's only used by this crazy
stuff.

> But as there are no users anymore, I could just let the constraints part go for
> now and once we've figured out the dt part there will be some way of setting
> these. Okay?

Yes, that's fine.

Attachment: signature.asc
Description: Digital signature


[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux