2014-05-26 15:45 GMT+02:00 Georgi Djakov <gdjakov@xxxxxxxxxx>: > On 23.05.14, 19:39, Matthias Brugger wrote: >> >> 2014-05-23 17:12 GMT+02:00 Georgi Djakov <gdjakov@xxxxxxxxxx>: >>> >>> Add information about the APQ8084 debug UART physical and virtual >>> addresses in the DEBUG_QCOM_UARTDM Kconfig help section. >>> Requires: https://lkml.org/lkml/2014/4/14/312 >>> >>> Signed-off-by: Georgi Djakov <gdjakov@xxxxxxxxxx> >>> --- >>> arch/arm/Kconfig.debug | 1 + >>> 1 file changed, 1 insertion(+) >>> >>> diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug >>> index 40ee328..e71723d 100644 >>> --- a/arch/arm/Kconfig.debug >>> +++ b/arch/arm/Kconfig.debug >>> @@ -376,6 +376,7 @@ choice >>> their output to the serial port on Qualcomm devices. >>> >>> ARCH DEBUG_UART_PHYS DEBUG_UART_BASE >>> + APQ8084 0xf995e000 0xfa75e000 >>> MSM8X60 0x19c40000 0xf0040000 >>> MSM8960 0x16440000 0xf0040000 >>> MSM8974 0xf991e000 0xfa71e000 >> >> >> You don't have any uart defined in your dts. You should add them >> before any adding low level debug support. >> Otherwise there might be problems in booting a multi-platform kernel. >> > > Thanks for the comment! As the uart depends on clocks, i am adding it to the > dts as part of my global clock controller patchset [1]. > In this patch i am just adding some information to the help section. > Do you see any problem with this? Are the patches for the clock controller applied already? If not, I would consider to add this patch to clock controller series. Cheers, Matthias > > [1] https://lkml.org/lkml/2014/5/22/422 > > Thanks, > Georgi -- motzblog.wordpress.com -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
