From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
Instance of this IP on Qualcomm's SOCs has bit different layout for datactrl
register. Bit postion datactrl[16:4] hold the true block size instead of power
of 2.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
---
drivers/mmc/host/mmci.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index 391e8d4..19d6b6f 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -58,6 +58,8 @@ static unsigned int fmax = 515633;
* @sdio: variant supports SDIO
* @st_clkdiv: true if using a ST-specific clock divider algorithm
* @blksz_datactrl16: true if Block size is at b16..b30 position in datactrl register
+ * @blksz_datactrl4: true if Block size is at b4..b16 position in datactrl
+ * register
* @pwrreg_powerup: power up value for MMCIPOWER register
* @signal_direction: input/out direction of bus signals can be indicated
* @pwrreg_clkgate: MMCIPOWER register must be used to gate the clock
@@ -73,6 +75,7 @@ struct variant_data {
bool sdio;
bool st_clkdiv;
bool blksz_datactrl16;
+ bool blksz_datactrl4;
u32 pwrreg_powerup;
bool signal_direction;
bool pwrreg_clkgate;
@@ -162,6 +165,7 @@ static struct variant_data variant_qcom = {
.fifosize = 16 * 4,
.fifohalfsize = 8 * 4,
.clkreg = MCI_CLK_ENABLE,
+ .blksz_datactrl4 = true,
.datalength_bits = 24,
.blksz_datactrl4 = true,
.pwrreg_powerup = MCI_PWR_UP,
@@ -760,6 +764,8 @@ static void mmci_start_data(struct mmci_host *host, struct mmc_data *data)
if (variant->blksz_datactrl16)
datactrl = MCI_DPSM_ENABLE | (data->blksz << 16);
+ else if (variant->blksz_datactrl4)
+ datactrl = MCI_DPSM_ENABLE | (data->blksz << 4);
else
datactrl = MCI_DPSM_ENABLE | blksz_bits << 4;
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
