From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
PHY drivers keep track of the current state of the hardware,
so don't change PHY settings under it.
Signed-off-by: Ivan T. Ivanov <iivanov@xxxxxxxxxx>
---
drivers/usb/chipidea/ci_hdrc_msm.c | 9 ++-------
1 file changed, 2 insertions(+), 7 deletions(-)
diff --git a/drivers/usb/chipidea/ci_hdrc_msm.c b/drivers/usb/chipidea/ci_hdrc_msm.c
index e9624f3..338b209 100644
--- a/drivers/usb/chipidea/ci_hdrc_msm.c
+++ b/drivers/usb/chipidea/ci_hdrc_msm.c
@@ -20,13 +20,11 @@
static void ci_hdrc_msm_notify_event(struct ci_hdrc *ci, unsigned event)
{
struct device *dev = ci->gadget.dev.parent;
- int val;
switch (event) {
case CI_HDRC_CONTROLLER_RESET_EVENT:
dev_dbg(dev, "CI_HDRC_CONTROLLER_RESET_EVENT received\n");
- writel(0, USB_AHBBURST);
- writel(0, USB_AHBMODE);
+ usb_phy_init(ci->transceiver);
break;
case CI_HDRC_CONTROLLER_STOPPED_EVENT:
dev_dbg(dev, "CI_HDRC_CONTROLLER_STOPPED_EVENT received\n");
@@ -34,10 +32,7 @@ static void ci_hdrc_msm_notify_event(struct ci_hdrc *ci, unsigned event)
* Put the transceiver in non-driving mode. Otherwise host
* may not detect soft-disconnection.
*/
- val = usb_phy_io_read(ci->transceiver, ULPI_FUNC_CTRL);
- val &= ~ULPI_FUNC_CTRL_OPMODE_MASK;
- val |= ULPI_FUNC_CTRL_OPMODE_NONDRIVING;
- usb_phy_io_write(ci->transceiver, val, ULPI_FUNC_CTRL);
+ usb_phy_notify_disconnect(ci->transceiver, USB_SPEED_UNKNOWN);
break;
default:
dev_dbg(dev, "unknown ci_hdrc event\n");
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
