This patch adds documentation for Qualcomm SDHCI MSM driver.
It contains the differences between the core properties in mmc.txt
and the properties used by the sdhci-msm driver.
Signed-off-by: Georgi Djakov <gdjakov@xxxxxxxxxx>
---
.../devicetree/bindings/mmc/sdhci-msm.txt | 92 ++++++++++++++++++++
1 file changed, 92 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mmc/sdhci-msm.txt
diff --git a/Documentation/devicetree/bindings/mmc/sdhci-msm.txt b/Documentation/devicetree/bindings/mmc/sdhci-msm.txt
new file mode 100644
index 0000000..8f1a52d
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/sdhci-msm.txt
@@ -0,0 +1,92 @@
+* Qualcomm SDHCI controller (sdhci-msm)
+
+This file documents differences between the core properties in mmc.txt
+and the properties used by the sdhci-msm driver.
+
+Required properties:
+- compatible: should contain "qcom,sdhci-msm"
+- reg: should contain SDHC, SD Core register map
+- reg-names: indicates various resources passed to driver (via reg proptery) by name
+ "reg-names" examples are "hc_mem" and "core_mem"
+- interrupts: should contain SDHC interrupts
+- interrupt-names: indicates interrupts passed to driver (via interrupts property) by name
+ "interrupt-names" examples are "hc_irq" and "pwr_irq"
+- vdd-supply: phandle to the regulator for the vdd (flash core voltage) supply.
+- vddio-supply: phandle to the regulator for the vdd-io (i/o voltage) supply.
+- pinctrl-names: Should contain only one value - "default".
+- pinctrl-0: Should specify pin control groups used for this controller.
+- clocks: A list of phandle + clock-specifier pairs for the clocks listed in clock-names
+- clock-names: Should contain the following:
+ "iface" - Main peripheral bus clock (PCLK/HCLK - AHB Bus clock) (required)
+ "core" - SDC MMC clock (MCLK) (required)
+ "bus" - SDCC bus voter clock (optional)
+
+Optional properties:
+- qcom,bus-speed-mode: specifies the supported bus speed modes by host
+ The supported bus speed modes are:
+ "HS200_1p8v" - indicates that host can support HS200 at 1.8v
+ "HS200_1p2v" - indicates that host can support HS200 at 1.2v
+ "DDR_1p8v" - indicates that host can support DDR mode at 1.8v
+ "DDR_1p2v" - indicates that host can support DDR mode at 1.2v
+
+- qcom,{vdd,vdd-io}-lpm-sup - specifies whether the supply can be kept in low power mode.
+- qcom,{vdd,vdd-io}-voltage-level - specifies voltage levels for the supply.
+ Should be specified in pairs (min, max), units uV.
+- qcom,{vdd,vdd-io}-current-level - specifies load levels for the supply in lpm
+ or high power mode (hpm). Should be specified in pairs (lpm, hpm), units uA.
+
+Example:
+
+ aliases {
+ sdhc1 = &sdhc_1;
+ sdhc2 = &sdhc_2;
+ };
+
+ sdhc_1: qcom,sdhc@f9824900 {
+ compatible = "qcom,sdhci-msm";
+ reg = <0xf9824900 0x11c>, <0xf9824000 0x800>;
+ reg-names = "hc_mem", "core_mem";
+ interrupts = <0 123 0>, <0 138 0>;
+ interrupt-names = "hc_irq", "pwr_irq";
+ bus-width = <8>;
+ non-removable;
+
+ vdd-supply = <&pm8941_l20>;
+ qcom,vdd-io-lpm-sup;
+ qcom,vdd-voltage-level = <2950000 2950000>;
+ qcom,vdd-current-level = <800 500000>;
+
+ vdd-io-supply = <&pm8941_s3>;
+ qcom,vdd-io-voltage-level = <1800000 1800000>;
+ qcom,vdd-io-current-level = <250 154000>;
+ qcom,bus-speed-mode = "HS200_1p8v", "DDR_1p8v";
+
+ pinctrl-names = "default"
+ pinctrl-0 = <&sdc1_clk &sdc1_cmd &sdc1_data>;
+
+ clocks = <&gcc GCC_SDCC1_APPS_CLK>, <&gcc GCC_SDCC1_AHB_CLK>;
+ clock-names = "iface", "core";
+ };
+
+ sdhc_2: sdhci@f98a4900 {
+ compatible = "qcom,sdhci-msm";
+ reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>;
+ reg-names = "hc_mem", "core_mem";
+ interrupts = <0 125 0>, <0 221 0>;
+ interrupt-names = "hc_irq", "pwr_irq";
+ bus-width = <4>;
+
+ vdd-supply = <&pm8941_l21>;
+ qcom,vdd-voltage-level = <2950000 2950000>;
+ qcom,vdd-current-level = <9000 800000>;
+
+ vdd-io-supply = <&pm8941_l13>;
+ qcom,vdd-io-voltage-level = <1800000 2950000>;
+ qcom,vdd-io-current-level = <6 22000>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdc2_clk &sdc2_cmd &sdc2_data>;
+
+ clocks = <&gcc GCC_SDCC2_APPS_CLK>, <&gcc GCC_SDCC2_AHB_CLK>;
+ clock-names = "core", "iface";
+ };
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
