From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
Allows MSM OTG controller to be specified via device tree.
Signed-off-by: Ivan T. Ivanov <iivanov@xxxxxxxxxx>
---
.../devicetree/bindings/usb/msm-hsusb.txt | 58 +++++++++++++++++++
drivers/usb/phy/phy-msm-usb.c | 59 ++++++++++++++++++--
2 files changed, 112 insertions(+), 5 deletions(-)
diff --git a/Documentation/devicetree/bindings/usb/msm-hsusb.txt b/Documentation/devicetree/bindings/usb/msm-hsusb.txt
index 5ea26c6..4ed8d1a 100644
--- a/Documentation/devicetree/bindings/usb/msm-hsusb.txt
+++ b/Documentation/devicetree/bindings/usb/msm-hsusb.txt
@@ -15,3 +15,61 @@ Example EHCI controller device node:
usb-phy = <&usb_otg>;
};
+
+OTG:
+
+Required properties:
+- compatible: should contain "qcom,hsusb-otg"
+- regs: offset and length of the register set in the memory map
+- interrupts: interrupt-specifier for the OTG interrupt.
+
+- clocks: A list of phandle + clock-specifier pairs for the
+ clocks listed in clock-names
+- clock-names: Should contain the following:
+ "phy" USB PHY reference clock
+ "core" Protocol engine clock
+ "iface" Interface bus clock
+ "alt_core" Optional: Protocol engine clock for targets with asynchronous
+ reset methodology.
+
+- dr_mode: One of "host", "peripheral" or "otg". Defaults to "otg"
+
+- vdccx-supply: phandle to the regulator for the vdd supply for
+ digital circuit operation.
+- v1p8-supply: phandle to the regulator for the 1.8V supply
+- v3p3-supply: phandle to the regulator for the 3.3V supply
+
+- qcom,phy-type: PHY type can be one of
+ 1 - Chipidea 45nm PHY
+ 2 - Synopsis 28nm PHY
+
+- qcom,otg-control: OTG control (VBUS and ID notifications) can be one of
+ 1 - PHY control
+ 2 - PMIC control
+ 3 - User control (via debugfs)
+
+Optional properties:
+- qcom,phy-init-sequence: PHY configuration sequence. val, reg pairs
+ terminate with -1
+
+Example HSUSB OTG controller device node:
+
+ usb@f9a55000 {
+ compatible = "qcom,hsusb-otg";
+ reg = <0xf9a55000 0x400>;
+ interrupts = <0 134 0>;;
+ dr_mode = "peripheral";
+
+ clocks = <&gcc GCC_XO_CLK>, <&gcc GCC_USB_HS_SYSTEM_CLK>,
+ <&gcc GCC_USB_HS_AHB_CLK>;
+
+ clock-names = "phy", "core", "iface";
+
+ vddcx-supply = <&pm8841_s2_corner>;
+ v1p8-supply = <&pm8941_l6>;
+ v3p3-supply = <&pm8941_l24>;
+
+ qcom,otg-control = <1>;
+ qcom,phy-type = <2>;
+ qcom,phy-init-sequence = <0x01 0x90 0xffffffff>;
+ };
diff --git a/drivers/usb/phy/phy-msm-usb.c b/drivers/usb/phy/phy-msm-usb.c
index f34c8a9..1ecea6f 100644
--- a/drivers/usb/phy/phy-msm-usb.c
+++ b/drivers/usb/phy/phy-msm-usb.c
@@ -30,9 +30,11 @@
#include <linux/debugfs.h>
#include <linux/seq_file.h>
#include <linux/pm_runtime.h>
+#include <linux/of.h>
#include <linux/usb.h>
#include <linux/usb/otg.h>
+#include <linux/usb/of.h>
#include <linux/usb/ulpi.h>
#include <linux/usb/gadget.h>
#include <linux/usb/hcd.h>
@@ -1342,17 +1344,57 @@ static void msm_otg_debugfs_cleanup(void)
debugfs_remove(msm_otg_dbg_root);
}
+struct msm_otg_platform_data *msm_otg_dt_to_pdata(struct platform_device *pdev)
+{
+ struct msm_otg_platform_data *pdata;
+ struct device_node *node = pdev->dev.of_node;
+ int len = 0;
+ u32 val;
+
+ pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata) {
+ dev_err(&pdev->dev, "unable to allocate platform data\n");
+ return NULL;
+ }
+
+ pdata->mode = of_usb_get_dr_mode(node);
+ if (pdata->mode == USB_DR_MODE_UNKNOWN)
+ pdata->mode = USB_DR_MODE_OTG;
+
+ pdata->otg_control = OTG_PHY_CONTROL;
+ if (!of_property_read_u32(node, "qcom,otg-control", &val))
+ pdata->otg_control = val;
+
+ pdata->phy_type = CI_45NM_INTEGRATED_PHY;
+ if (!of_property_read_u32(node, "qcom,phy-type", &val))
+ pdata->phy_type = val;
+
+ if (!of_get_property(node, "qcom,phy-init-sequence", &len) || !len)
+ return pdata;
+
+ pdata->phy_init_seq = devm_kzalloc(&pdev->dev, len, GFP_KERNEL);
+ if (!pdata->phy_init_seq)
+ return pdata;
+
+ of_property_read_u32_array(node, "qcom,phy-init-sequence",
+ pdata->phy_init_seq,
+ len / sizeof(*pdata->phy_init_seq));
+ return pdata;
+}
+
static int __init msm_otg_probe(struct platform_device *pdev)
{
int ret = 0;
+ struct msm_otg_platform_data *pdata;
struct resource *res;
struct msm_otg *motg;
struct usb_phy *phy;
- dev_info(&pdev->dev, "msm_otg probe\n");
- if (!dev_get_platdata(&pdev->dev)) {
- dev_err(&pdev->dev, "No platform data given. Bailing out\n");
- return -ENODEV;
+ pdata = dev_get_platdata(&pdev->dev);
+ if (!pdata) {
+ pdata = msm_otg_dt_to_pdata(pdev);
+ if (!pdata)
+ return -ENOMEM;
}
motg = devm_kzalloc(&pdev->dev, sizeof(struct msm_otg), GFP_KERNEL);
@@ -1368,7 +1410,7 @@ static int __init msm_otg_probe(struct platform_device *pdev)
return -ENOMEM;
}
- motg->pdata = dev_get_platdata(&pdev->dev);
+ motg->pdata = pdata;
phy = &motg->phy;
phy->dev = &pdev->dev;
@@ -1643,6 +1685,12 @@ static const struct dev_pm_ops msm_otg_dev_pm_ops = {
};
#endif
+static struct of_device_id msm_otg_dt_match[] = {
+ { .compatible = "qcom,hsusb-otg", },
+ {}
+};
+MODULE_DEVICE_TABLE(of, msm_otg_dt_match);
+
static struct platform_driver msm_otg_driver = {
.probe = msm_otg_probe,
.remove = msm_otg_remove,
@@ -1652,6 +1700,7 @@ static struct platform_driver msm_otg_driver = {
#ifdef CONFIG_PM
.pm = &msm_otg_dev_pm_ops,
#endif
+ .of_match_table = msm_otg_dt_match,
},
};
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
