On Thu, Sep 19, 2013 at 4:44 PM, Sujit Reddy Thumma
<sthumma@xxxxxxxxxxxxxx> wrote:
> There is a possible race condition in the hardware when the abort
> command is issued to terminate the ongoing SCSI command as described
> below:
>
> - A bit in the door-bell register is set in the controller for a
> new SCSI command.
> - In some rare situations, before controller get a chance to issue
> the command to the device, the software issued an abort command.
> - If the device recieves abort command first then it returns success
> because the command itself is not present.
> - Now if the controller commits the command to device it will be
> processed.
> - Software thinks that command is aborted and proceed while still
> the device is processing it.
> - The software, controller and device may go out of sync because of
> this race condition.
>
> To avoid this, query task presence in the device before sending abort
> task command so that after the abort operation, the command is guaranteed
> to be non-existent in both controller and the device.
>
> Signed-off-by: Sujit Reddy Thumma <sthumma@xxxxxxxxxxxxxx>
> Reviewed-by: Yaniv Gardi <ygardi@xxxxxxxxxxxxxx>
> Tested-by: Dolev Raviv <draviv@xxxxxxxxxxxxxx>
> ---
> drivers/scsi/ufs/ufshcd.c | 70 +++++++++++++++++++++++++++++++++++++----------
> 1 file changed, 55 insertions(+), 15 deletions(-)
>
> diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
> index c3acadc..52f66e4 100644
> --- a/drivers/scsi/ufs/ufshcd.c
> +++ b/drivers/scsi/ufs/ufshcd.c
> @@ -2695,6 +2695,12 @@ static int ufshcd_host_reset(struct scsi_cmnd *cmd)
> * ufshcd_abort - abort a specific command
> * @cmd: SCSI command pointer
> *
> + * Abort the pending command in device by sending UFS_ABORT_TASK task management
> + * command, and in host controller by clearing the door-bell register. There can
> + * be race between controller sending the command to the device while abort is
> + * issued. To avoid that, first issue UFS_QUERY_TASK to check if the command is
> + * really issued and then try to abort it.
> + *
> * Returns SUCCESS/FAILED
> */
> static int ufshcd_abort(struct scsi_cmnd *cmd)
> @@ -2703,7 +2709,8 @@ static int ufshcd_abort(struct scsi_cmnd *cmd)
> struct ufs_hba *hba;
> unsigned long flags;
> unsigned int tag;
> - int err;
> + int err = 0;
> + int poll_cnt;
> u8 resp = 0xF;
> struct ufshcd_lrb *lrbp;
>
> @@ -2711,33 +2718,59 @@ static int ufshcd_abort(struct scsi_cmnd *cmd)
> hba = shost_priv(host);
> tag = cmd->request->tag;
>
> - spin_lock_irqsave(host->host_lock, flags);
> + /* If command is already aborted/completed, return SUCCESS */
> + if (!(test_bit(tag, &hba->outstanding_reqs)))
> + goto out;
>
> - /* check if command is still pending */
> - if (!(test_bit(tag, &hba->outstanding_reqs))) {
> - err = FAILED;
> - spin_unlock_irqrestore(host->host_lock, flags);
> + lrbp = &hba->lrb[tag];
> + for (poll_cnt = 100; poll_cnt; poll_cnt--) {
> + err = ufshcd_issue_tm_cmd(hba, lrbp->lun, lrbp->task_tag,
> + UFS_QUERY_TASK, &resp);
> + if (!err && resp == UPIU_TASK_MANAGEMENT_FUNC_SUCCEEDED) {
> + /* cmd pending in the device */
> + break;
> + } else if (!err && resp == UPIU_TASK_MANAGEMENT_FUNC_COMPL) {
> + u32 reg;
> +
> + /*
> + * cmd not pending in the device, check if it is
> + * in transition.
> + */
> + reg = ufshcd_readl(hba, REG_UTP_TRANSFER_REQ_DOOR_BELL);
> + if (reg & (1 << tag)) {
> + /* sleep for max. 200us to stabilize */
> + usleep_range(100, 200);
> + continue;
> + }
> + /* command completed already */
> + goto out;
> + } else {
> + if (!err)
> + err = resp; /* service response error */
> + goto out;
> + }
> + }
> +
> + if (!poll_cnt) {
> + err = -EBUSY;
> goto out;
> }
> - spin_unlock_irqrestore(host->host_lock, flags);
>
> - lrbp = &hba->lrb[tag];
> err = ufshcd_issue_tm_cmd(hba, lrbp->lun, lrbp->task_tag,
> UFS_ABORT_TASK, &resp);
> if (err || resp != UPIU_TASK_MANAGEMENT_FUNC_COMPL) {
> - err = FAILED;
> + if (!err)
> + err = resp; /* service response error */
> goto out;
> - } else {
> - err = SUCCESS;
> }
>
> + err = ufshcd_clear_cmd(hba, tag);
> + if (err)
> + goto out;
> +
> scsi_dma_unmap(cmd);
>
> spin_lock_irqsave(host->host_lock, flags);
> -
> - /* clear the respective UTRLCLR register bit */
> - ufshcd_utrl_clear(hba, tag);
> -
> __clear_bit(tag, &hba->outstanding_reqs);
> hba->lrb[tag].cmd = NULL;
> spin_unlock_irqrestore(host->host_lock, flags);
> @@ -2745,6 +2778,13 @@ static int ufshcd_abort(struct scsi_cmnd *cmd)
> clear_bit_unlock(tag, &hba->lrb_in_use);
> wake_up(&hba->dev_cmd.tag_wq);
> out:
> + if (!err) {
> + err = SUCCESS;
> + } else {
> + dev_err(hba->dev, "%s: failed with err %d\n", __func__, err);
> + err = FAILED;
> + }
> +
> return err;
> }
>
Acked-by: Vinayak Holikatti <vinholikatti@xxxxxxxxx>
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
