On Mon, Nov 14, 2011 at 02:58:27PM -0700, Harini Jayaraman wrote:
> This bus driver supports the QUP SPI hardware controller in the Qualcomm
> MSM SOCs. The Qualcomm Universal Peripheral Engine (QUP) is a general
> purpose data path engine with input/output FIFOs and an embedded SPI
> mini-core. The driver currently supports only FIFO mode.
>
> Signed-off-by: Harini Jayaraman <harinij@xxxxxxxxxxxxxx>
Wow, this driver is huge. This is a rough review only, mainly to see
what can go away. This will make further reviews easier.
> ---
> v2: Updated copyright information (addresses comments from Bryan Huntsman).
> Files renamed.
> ---
> drivers/spi/Kconfig | 10 +
> drivers/spi/Makefile | 1 +
> drivers/spi/spi-qup.c | 1144 +++++++++++++++++++++++++++++++++
> drivers/spi/spi-qup.h | 436 +++++++++++++
> include/linux/platform_data/msm_spi.h | 19 +
> 5 files changed, 1610 insertions(+), 0 deletions(-)
> create mode 100644 drivers/spi/spi-qup.c
> create mode 100644 drivers/spi/spi-qup.h
> create mode 100644 include/linux/platform_data/msm_spi.h
>
> diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
> index 52e2900..88ea7c5 100644
> --- a/drivers/spi/Kconfig
> +++ b/drivers/spi/Kconfig
> @@ -280,6 +280,16 @@ config SPI_PXA2XX
> config SPI_PXA2XX_PCI
> def_bool SPI_PXA2XX && X86_32 && PCI
>
> +config SPI_QUP
> + tristate "Qualcomm MSM SPI QUPe Support"
> + depends on ARCH_MSM
> + help
> + Support for Serial Peripheral Interface for Qualcomm Universal
> + Peripheral.
> +
> + This driver can also be built as a module. If so, the module
> + will be called spi-qup.
> +
> config SPI_S3C24XX
> tristate "Samsung S3C24XX series SPI"
> depends on ARCH_S3C2410 && EXPERIMENTAL
> diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
> index 61c3261..4d840ff 100644
> --- a/drivers/spi/Makefile
> +++ b/drivers/spi/Makefile
> @@ -44,6 +44,7 @@ obj-$(CONFIG_SPI_PL022) += spi-pl022.o
> obj-$(CONFIG_SPI_PPC4xx) += spi-ppc4xx.o
> obj-$(CONFIG_SPI_PXA2XX) += spi-pxa2xx.o
> obj-$(CONFIG_SPI_PXA2XX_PCI) += spi-pxa2xx-pci.o
> +obj-$(CONFIG_SPI_QUP) += spi-qup.o
> obj-$(CONFIG_SPI_S3C24XX) += spi-s3c24xx-hw.o
> spi-s3c24xx-hw-y := spi-s3c24xx.o
> spi-s3c24xx-hw-$(CONFIG_SPI_S3C24XX_FIQ) += spi-s3c24xx-fiq.o
> diff --git a/drivers/spi/spi-qup.c b/drivers/spi/spi-qup.c
> new file mode 100644
> index 0000000..4b411d8
> --- /dev/null
> +++ b/drivers/spi/spi-qup.c
> @@ -0,0 +1,1144 @@
> +/* Copyright (c) 2008-2011, Code Aurora Forum. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/version.h>
> +#include <linux/kernel.h>
> +#include <linux/init.h>
> +#include <linux/spinlock.h>
> +#include <linux/list.h>
> +#include <linux/irq.h>
> +#include <linux/platform_device.h>
> +#include <linux/spi/spi.h>
> +#include <linux/interrupt.h>
> +#include <linux/err.h>
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/workqueue.h>
> +#include <linux/io.h>
> +#include <linux/debugfs.h>
> +#include <linux/sched.h>
> +#include <linux/mutex.h>
> +#include <linux/platform_data/msm_spi.h>
> +#include "spi-qup.h"
> +
> +static void msm_spi_clock_set(struct msm_spi *dd, int speed)
> +{
> + int rc;
> +
> + rc = clk_set_rate(dd->clk, speed);
> + if (!rc)
> + dd->clock_speed = speed;
> +}
> +
> +static int msm_spi_calculate_size(int *fifo_size,
> + int *block_size,
> + int block,
> + int mult)
> +{
> + int words;
> +
> + switch (block) {
> + case 0:
> + words = 1; /* 4 bytes */
> + break;
> + case 1:
> + words = 4; /* 16 bytes */
> + break;
> + case 2:
> + words = 8; /* 32 bytes */
> + break;
> + default:
> + return -EINVAL;
> + }
> +
> + switch (mult) {
> + case 0:
> + *fifo_size = words * 2;
> + break;
> + case 1:
> + *fifo_size = words * 4;
> + break;
> + case 2:
> + *fifo_size = words * 8;
> + break;
> + case 3:
> + *fifo_size = words * 16;
> + break;
> + default:
> + return -EINVAL;
> + }
I think this can be simplified. Example for this switch:
if (mult > 3)
return -EINVAL;
*fifo_size = (words * 2) << mult;
Probably the whole function can be optimized away somehow?
> +
> + *block_size = words * sizeof(u32); /* in bytes */
> + return 0;
> +}
...
> +#ifdef CONFIG_DEBUG_FS
> +static int debugfs_iomem_x32_set(void *data, u64 val)
> +{
> + iowrite32(val, data);
> + /* Ensure the previous write completed. */
> + wmb();
> + return 0;
> +}
> +
> +static int debugfs_iomem_x32_get(void *data, u64 *val)
> +{
> + *val = ioread32(data);
> + return 0;
> +}
> +
> +DEFINE_SIMPLE_ATTRIBUTE(fops_iomem_x32, debugfs_iomem_x32_get,
> + debugfs_iomem_x32_set, "0x%08llx\n");
> +
> +static void spi_debugfs_init(struct msm_spi *dd)
> +{
> + dd->dent_spi = debugfs_create_dir(dev_name(dd->dev), NULL);
> + if (dd->dent_spi) {
> + int i;
> +
> + for (i = 0; i < ARRAY_SIZE(debugfs_spi_regs); i++) {
> + dd->debugfs_spi_regs[i] =
> + debugfs_create_file(
> + debugfs_spi_regs[i].name,
> + debugfs_spi_regs[i].mode,
> + dd->dent_spi,
> + dd->base + debugfs_spi_regs[i].offset,
> + &fops_iomem_x32);
> + }
> + }
> +}
> +
> +static void spi_debugfs_exit(struct msm_spi *dd)
> +{
> + if (dd->dent_spi) {
> + int i;
> +
> + debugfs_remove_recursive(dd->dent_spi);
> + dd->dent_spi = NULL;
> + for (i = 0; i < ARRAY_SIZE(debugfs_spi_regs); i++)
> + dd->debugfs_spi_regs[i] = NULL;
> + }
> +}
> +#else
> +static void spi_debugfs_init(struct msm_spi *dd) {}
> +static void spi_debugfs_exit(struct msm_spi *dd) {}
> +#endif
That interface should go away. It might have been nice when developing
the driver, but we other mechanisms to read out register values.
> +
> +/* ===Device attributes begin=== */
> +static ssize_t show_stats(struct device *dev, struct device_attribute *attr,
> + char *buf)
> +{
> + struct spi_master *master = dev_get_drvdata(dev);
> + struct msm_spi *dd = spi_master_get_devdata(master);
> +
> + return snprintf(buf, PAGE_SIZE,
> + "Device %s\n"
> + "rx fifo_size = %d spi words\n"
> + "tx fifo_size = %d spi words\n"
> + "rx block size = %d bytes\n"
> + "tx block size = %d bytes\n"
> + "--statistics--\n"
> + "Rx isrs = %d\n"
> + "Tx isrs = %d\n"
> + "--debug--\n"
> + "NA yet\n",
> + dev_name(dev),
> + dd->input_fifo_size,
> + dd->output_fifo_size,
> + dd->input_block_size,
> + dd->output_block_size,
> + dd->stat_rx,
> + dd->stat_tx
> + );
> +}
> +
> +/* Reset statistics on write */
> +static ssize_t set_stats(struct device *dev, struct device_attribute *attr,
> + const char *buf, size_t count)
> +{
> + struct msm_spi *dd = dev_get_drvdata(dev);
> +
> + dd->stat_rx = 0;
> + dd->stat_tx = 0;
> + return count;
> +}
> +
> +static DEVICE_ATTR(stats, S_IRUGO | S_IWUSR, show_stats, set_stats);
> +
> +static struct attribute *dev_attrs[] = {
> + &dev_attr_stats.attr,
> + NULL,
> +};
> +
> +static struct attribute_group dev_attr_grp = {
> + .attrs = dev_attrs,
> +};
> +/* ===Device attributes end=== */
This should go as well. Not really needed.
> +
> +static int __init msm_spi_probe(struct platform_device *pdev)
> +{
> + struct spi_master *master;
> + struct msm_spi *dd;
> + struct resource *resource;
> + int rc = -ENXIO;
> + int locked = 0;
> + int clk_enabled = 0;
> + int pclk_enabled = 0;
> + struct msm_spi_platform_data *pdata = pdev->dev.platform_data;
> +
> + master = spi_alloc_master(&pdev->dev, sizeof(struct msm_spi));
> + if (!master) {
> + rc = -ENOMEM;
> + dev_err(&pdev->dev, "master allocation failed\n");
> + goto err_probe_exit;
> + }
> +
> + master->bus_num = pdev->id;
> + master->mode_bits = SPI_SUPPORTED_MODES;
> + master->num_chipselect = SPI_NUM_CHIPSELECTS;
> + master->setup = msm_spi_setup;
> + master->transfer = msm_spi_transfer;
> + platform_set_drvdata(pdev, master);
> + dd = spi_master_get_devdata(master);
> +
> + dd->pdata = pdata;
> + rc = msm_spi_get_irq_data(dd, pdev);
> + if (rc)
> + goto err_probe_res;
> +
> + resource = platform_get_resource_byname(pdev,
> + IORESOURCE_MEM, "spi_base");
> + if (!resource) {
> + rc = -ENXIO;
> + goto err_probe_res;
> + }
> +
> + dd->mem_phys_addr = resource->start;
> + dd->mem_size = resource_size(resource);
> +
> + spin_lock_init(&dd->queue_lock);
> + mutex_init(&dd->core_lock);
> + INIT_LIST_HEAD(&dd->queue);
> + INIT_WORK(&dd->work_data, msm_spi_workq);
> + init_waitqueue_head(&dd->continue_suspend);
> + dd->workqueue = create_singlethread_workqueue(
> + dev_name(master->dev.parent));
> + if (!dd->workqueue)
> + goto err_probe_res;
> +
> + if (!devm_request_mem_region(&pdev->dev, dd->mem_phys_addr,
> + dd->mem_size, SPI_DRV_NAME)) {
> + rc = -ENXIO;
> + goto err_probe_reqmem;
> + }
> +
> + dd->base = devm_ioremap(&pdev->dev, dd->mem_phys_addr, dd->mem_size);
> + if (!dd->base) {
> + rc = -ENOMEM;
> + goto err_probe_reqmem;
> + }
> +
> +
> + mutex_lock(&dd->core_lock);
> + locked = 1;
> + dd->dev = &pdev->dev;
> + dd->clk = clk_get(&pdev->dev, "spi_clk");
> + if (IS_ERR(dd->clk)) {
> + dev_err(&pdev->dev, "%s: unable to get spi_clk\n", __func__);
> + rc = PTR_ERR(dd->clk);
> + goto err_probe_clk_get;
> + }
> +
> + dd->pclk = clk_get(&pdev->dev, "spi_pclk");
> + if (IS_ERR(dd->pclk)) {
> + dev_err(&pdev->dev, "%s: unable to get spi_pclk\n", __func__);
> + rc = PTR_ERR(dd->pclk);
> + goto err_probe_pclk_get;
> + }
> +
> + if (pdata && pdata->max_clock_speed)
> + msm_spi_clock_set(dd, dd->pdata->max_clock_speed);
> +
> + rc = clk_enable(dd->clk);
> + if (rc) {
> + dev_err(&pdev->dev, "%s: unable to enable spi_clk\n",
> + __func__);
> + goto err_probe_clk_enable;
> + }
> +
> + clk_enabled = 1;
> + rc = clk_enable(dd->pclk);
> + if (rc) {
> + dev_err(&pdev->dev, "%s: unable to enable spi_pclk\n",
> + __func__);
> + goto err_probe_pclk_enable;
> + }
> +
> + pclk_enabled = 1;
> + rc = msm_spi_configure_gsbi(dd, pdev);
> + if (rc)
> + goto err_probe_gsbi;
> +
> + msm_spi_calculate_fifo_size(dd);
> +
> + /* Initialize registers */
> + writel(0x00000001, dd->base + SPI_SW_RESET);
> + msm_spi_set_state(dd, SPI_OP_STATE_RESET);
> + writel(0x00000000, dd->base + SPI_OPERATIONAL);
> + writel(0x00000000, dd->base + SPI_CONFIG);
> + writel(0x00000000, dd->base + SPI_IO_MODES);
0x0, or 0x1 will do. Save the leading 0s.
> + /*
> + * The SPI core generates a bogus input overrun error on some targets,
> + * when a transition from run to reset state occurs and if the FIFO has
> + * an odd number of entries. Hence we disable the INPUT_OVER_RUN_ERR_EN
> + * bit.
> + */
> + msm_spi_enable_error_flags(dd);
> +
> + writel(SPI_IO_C_NO_TRI_STATE, dd->base + SPI_IO_CONTROL);
> + rc = msm_spi_set_state(dd, SPI_OP_STATE_RESET);
> + if (rc)
> + goto err_probe_state;
> +
> + clk_disable(dd->clk);
> + clk_disable(dd->pclk);
> + clk_enabled = 0;
> + pclk_enabled = 0;
> +
> + dd->suspended = 0;
> + dd->transfer_pending = 0;
> + dd->multi_xfr = 0;
> + dd->mode = SPI_MODE_NONE;
> +
> + rc = msm_spi_request_irq(dd, pdev->name, master);
There is also devm_request_irq
> + if (rc)
> + goto err_probe_irq;
> +
> + msm_spi_disable_irqs(dd);
> + mutex_unlock(&dd->core_lock);
> + locked = 0;
> +
> + rc = spi_register_master(master);
> + if (rc)
> + goto err_probe_reg_master;
> +
> + rc = sysfs_create_group(&(dd->dev->kobj), &dev_attr_grp);
> + if (rc) {
> + dev_err(&pdev->dev, "failed to create dev. attrs : %d\n", rc);
> + goto err_attrs;
> + }
> +
> + spi_debugfs_init(dd);
> +
> + return 0;
> +
> +err_attrs:
> + spi_unregister_master(master);
> +err_probe_reg_master:
> + msm_spi_free_irq(dd, master);
> +err_probe_irq:
> +err_probe_state:
> +err_probe_gsbi:
> + if (pclk_enabled)
> + clk_disable(dd->pclk);
> +err_probe_pclk_enable:
> + if (clk_enabled)
> + clk_disable(dd->clk);
> +err_probe_clk_enable:
> + clk_put(dd->pclk);
> +err_probe_pclk_get:
> + clk_put(dd->clk);
> +err_probe_clk_get:
> + if (locked)
> + mutex_unlock(&dd->core_lock);
> +err_probe_reqmem:
> + destroy_workqueue(dd->workqueue);
> +err_probe_res:
> + spi_master_put(master);
> +err_probe_exit:
> + return rc;
> +}
> +
...
> +static struct platform_driver msm_spi_driver = {
> + .driver = {
> + .name = SPI_DRV_NAME,
> + .owner = THIS_MODULE,
> + },
> + .suspend = msm_spi_suspend,
> + .resume = msm_spi_resume,
> + .remove = __exit_p(msm_spi_remove),
> +};
What about using module_platform_driver?
> +
> +static int __init msm_spi_init(void)
> +{
> + return platform_driver_probe(&msm_spi_driver, msm_spi_probe);
> +}
> +module_init(msm_spi_init);
> +
> +static void __exit msm_spi_exit(void)
> +{
> + platform_driver_unregister(&msm_spi_driver);
> +}
> +module_exit(msm_spi_exit);
> +
> +MODULE_LICENSE("GPL v2");
> +MODULE_VERSION("0.3");
MODULE_VERSION is not really needed these days.
> +MODULE_ALIAS("platform:"SPI_DRV_NAME);
> diff --git a/drivers/spi/spi-qup.h b/drivers/spi/spi-qup.h
> new file mode 100644
> index 0000000..be0dc66
> --- /dev/null
> +++ b/drivers/spi/spi-qup.h
> @@ -0,0 +1,436 @@
> +/* Copyright (c) 2008-2011, Code Aurora Forum. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
...
> +#ifdef CONFIG_DEBUG_FS
> +static const struct {
> + const char *name;
> + mode_t mode;
> + int offset;
> +} debugfs_spi_regs[] = {
> + {"config", S_IRUGO | S_IWUSR, SPI_CONFIG},
> + {"io_control", S_IRUGO | S_IWUSR, SPI_IO_CONTROL},
> + {"io_modes", S_IRUGO | S_IWUSR, SPI_IO_MODES},
> + {"sw_reset", S_IWUSR, SPI_SW_RESET},
> + {"time_out", S_IRUGO | S_IWUSR, SPI_TIME_OUT},
> + {"time_out_current", S_IRUGO, SPI_TIME_OUT_CURRENT},
> + {"mx_output_count", S_IRUGO | S_IWUSR, SPI_MX_OUTPUT_COUNT},
> + {"mx_output_cnt_current", S_IRUGO, SPI_MX_OUTPUT_CNT_CURRENT},
> + {"mx_input_count", S_IRUGO | S_IWUSR, SPI_MX_INPUT_COUNT},
> + {"mx_input_cnt_current", S_IRUGO, SPI_MX_INPUT_CNT_CURRENT},
> + {"mx_read_count", S_IRUGO | S_IWUSR, SPI_MX_READ_COUNT},
> + {"mx_read_cnt_current", S_IRUGO, SPI_MX_READ_CNT_CURRENT},
> + {"operational", S_IRUGO | S_IWUSR, SPI_OPERATIONAL},
> + {"error_flags", S_IRUGO | S_IWUSR, SPI_ERROR_FLAGS},
> + {"error_flags_en", S_IRUGO | S_IWUSR, SPI_ERROR_FLAGS_EN},
> + {"deassert_wait", S_IRUGO | S_IWUSR, SPI_DEASSERT_WAIT},
> + {"output_debug", S_IRUGO, SPI_OUTPUT_DEBUG},
> + {"input_debug", S_IRUGO, SPI_INPUT_DEBUG},
> + {"test_ctrl", S_IRUGO | S_IWUSR, SPI_TEST_CTRL},
> + {"output_fifo", S_IWUSR, SPI_OUTPUT_FIFO},
> + {"input_fifo" , S_IRUSR, SPI_INPUT_FIFO},
> + {"spi_state", S_IRUGO | S_IWUSR, SPI_STATE},
> + {"qup_config", S_IRUGO | S_IWUSR, QUP_CONFIG},
> + {"qup_error_flags", S_IRUGO | S_IWUSR, QUP_ERROR_FLAGS},
> + {"qup_error_flags_en", S_IRUGO | S_IWUSR, QUP_ERROR_FLAGS_EN},
> + {"mx_write_cnt", S_IRUGO | S_IWUSR, QUP_MX_WRITE_COUNT},
> + {"mx_write_cnt_current", S_IRUGO, QUP_MX_WRITE_CNT_CURRENT},
> + {"output_fifo_word_cnt", S_IRUGO, SPI_OUTPUT_FIFO_WORD_CNT},
> + {"input_fifo_word_cnt", S_IRUGO, SPI_INPUT_FIFO_WORD_CNT},
> +};
> +#endif
Again, drop it.
> +
> +/**
> + * struct msm_spi
> + * @read_buf: rx_buf from the spi_transfer.
> + * @write_buf: tx_buf from the spi_transfer.
> + * @base: location of QUP controller I/O area in memory.
> + * @dev: parent platform device.
> + * @queue_lock: lock to protect queue.
> + * @core_lock: mutex used to protect this struct.
> + * @queue: to log SPI transfer requests.
> + * @workqueue: workqueue for the SPI transfer requests.
> + * @work_data: work.
> + * @cur_msg: the current spi_message being processed.
> + * @cur_transfer: the current spi_transfer being processed.
> + * @transfer_complete: completion function to signal the end of a spi_transfer.
> + * @clk: the SPI core clock
> + * @pclk: hardware core clock. Needs to be enabled to access the QUP register
> + * @mem_phys_addr: physical address of the QUP controller.
> + * @mem_size: size of the QUP controller block.
> + * @input_fifo_size: the input FIFO size (in bytes).
> + * @output_fifo_size: the output FIFO size (in bytes).
> + * @rx_bytes_remaining: the number of rx bytes remaining to be transferred.
> + * @tx_bytes_remaining: the number of tx bytes remaining to be transferred.
> + * @clock_speed: SPI clock speed.
> + * @irq_in: assigned interrupt line for QUP interrupts.
> + * @read_xfr_cnt: number of words read from the FIFO (per transfer).
> + * @write_xfr_cnt: number of words written to the FIFO (per transfer).
> + * @write_len: the total number of tx bytes to be transferred, per
> + * spi_message. This is valid only for WR-WR and WR-RD transfers
> + * in a single spi_message.
> + * @read_len: the total number of rx bytes to be transferred, per
> + * spi_message. This is valid only for WR-WR and WR-RD transfers
> + * in a single spi_message.
> + * @bytes_per_word: bytes per word
> + * @suspended: the suspend state.
> + * @transfer_pending: when set indicates a pending transfer.
> + * @continue_suspend: head of wait queue.
> + * @mode: mode for SPI operation.
> + * @input_block_size: the input block size (in bytes).
> + * @output_block_size: the output block size (in bytes).
> + * @stat_rx: count of input interrupts handled.
> + * @stat_tx: count of output interrupts handled.
> + * @dent_spi: used for debug purposes.
> + * @debugfs_spi_regs: used for debug purposes.
> + * @pdata: platform data
> + * @multi_xfr: when set indicates multiple spi_transfers in a single
> + * spi_message.
> + * @done: flag used to signal completion.
> + * @cur_msg_len: combined length of all the transfers in a single
> + * spi_message (in bytes).
> + * @cur_tx_transfer: the current tx transfer being processed. Used in
> + * FIFO mode only.
> + * @cur_rx_transfer: the current rx transfer being processed. Used in
> + * FIFO mode only.
> + *
> + * Early QUP controller used three separate interrupt lines for input, output,
> + * and error interrupts. Later versions share a single interrupt line.
> + */
> +struct msm_spi {
> + u8 *read_buf;
> + const u8 *write_buf;
> + void __iomem *base;
> + struct device *dev;
> + spinlock_t queue_lock;
> + struct mutex core_lock;
> + struct list_head queue;
> + struct workqueue_struct *workqueue;
> + struct work_struct work_data;
> + struct spi_message *cur_msg;
> + struct spi_transfer *cur_transfer;
> + struct completion transfer_complete;
> + struct clk *clk;
> + struct clk *pclk;
> + unsigned long mem_phys_addr;
> + size_t mem_size;
> + int input_fifo_size;
> + int output_fifo_size;
> + u32 rx_bytes_remaining;
> + u32 tx_bytes_remaining;
> + u32 clock_speed;
> + int irq_in;
> + int read_xfr_cnt;
> + int write_xfr_cnt;
> + int write_len;
> + int read_len;
> + int bytes_per_word;
> + bool suspended;
> + bool transfer_pending;
> + wait_queue_head_t continue_suspend;
> + enum msm_spi_mode mode;
> + int input_block_size;
> + int output_block_size;
> + int stat_rx;
> + int stat_tx;
> +#ifdef CONFIG_DEBUG_FS
> + struct dentry *dent_spi;
> + struct dentry *debugfs_spi_regs[ARRAY_SIZE(debugfs_spi_regs)];
> +#endif
> + struct msm_spi_platform_data *pdata;
> + bool multi_xfr;
> + bool done;
> + u32 cur_msg_len;
> + struct spi_transfer *cur_tx_transfer;
> + struct spi_transfer *cur_rx_transfer;
> +};
This looks excessive. Please check if all of this is really needed?
> +
> +/* Forward declaration */
> +static irqreturn_t msm_spi_input_irq(int irq, void *dev_id);
> +static irqreturn_t msm_spi_output_irq(int irq, void *dev_id);
> +static irqreturn_t msm_spi_error_irq(int irq, void *dev_id);
> +static inline int msm_spi_set_state(struct msm_spi *dd,
> + enum msm_spi_state state);
> +static void msm_spi_write_word_to_fifo(struct msm_spi *dd);
> +static inline void msm_spi_write_rmn_to_fifo(struct msm_spi *dd);
> +
> +/* In QUP the same interrupt line is used for input, output and error */
> +static inline int msm_spi_get_irq_data(struct msm_spi *dd,
> + struct platform_device *pdev)
> +{
> + dd->irq_in = platform_get_irq_byname(pdev, "spi_irq_in");
> + if (dd->irq_in < 0)
> + return -EINVAL;
> +
> + return 0;
> +}
> +
> +static inline int msm_spi_configure_gsbi(struct msm_spi *dd,
> + struct platform_device *pdev)
> +{
> + struct resource *resource;
> + unsigned long gsbi_mem_phys_addr;
> + size_t gsbi_mem_size;
> + void __iomem *gsbi_base;
> +
> + resource = platform_get_resource_byname(pdev,
> + IORESOURCE_MEM, "gsbi_base");
> + if (!resource)
> + return -ENXIO;
> +
> + gsbi_mem_phys_addr = resource->start;
> + gsbi_mem_size = resource_size(resource);
> + if (!devm_request_mem_region(&pdev->dev, gsbi_mem_phys_addr,
> + gsbi_mem_size, SPI_DRV_NAME))
> + return -ENXIO;
> +
> + gsbi_base = devm_ioremap(&pdev->dev, gsbi_mem_phys_addr,
> + gsbi_mem_size);
> + if (!gsbi_base)
> + return -ENXIO;
> +
> + /* Set GSBI to SPI mode */
> + writel(GSBI_SPI_CONFIG, gsbi_base + GSBI_CTRL_REG);
> +
> + return 0;
> +}
> +
> +/* Figure which irq occured and call the relevant functions */
> +static irqreturn_t msm_spi_qup_irq(int irq, void *dev_id)
> +{
> + u32 op, ret = IRQ_NONE;
> + struct msm_spi *dd = dev_id;
> +
> + if (readl(dd->base + SPI_ERROR_FLAGS) ||
> + readl(dd->base + QUP_ERROR_FLAGS)) {
> + struct spi_master *master = dev_get_drvdata(dd->dev);
> + ret |= msm_spi_error_irq(irq, master);
> + }
> +
> + op = readl(dd->base + SPI_OPERATIONAL);
> + if (op & SPI_OP_INPUT_SERVICE_FLAG) {
> + writel(SPI_OP_INPUT_SERVICE_FLAG, dd->base + SPI_OPERATIONAL);
> + ret |= msm_spi_input_irq(irq, dev_id);
> + }
> +
> + if (op & SPI_OP_OUTPUT_SERVICE_FLAG) {
> + writel(SPI_OP_OUTPUT_SERVICE_FLAG, dd->base + SPI_OPERATIONAL);
> + ret |= msm_spi_output_irq(irq, dev_id);
> + }
> +
> + if (dd->done) {
> + complete(&dd->transfer_complete);
> + dd->done = 0;
> + }
> + return ret;
> +}
Too much code for a header file IMO.
> +
> +static inline int msm_spi_request_irq(struct msm_spi *dd,
> + const char *name,
> + struct spi_master *master)
> +{
> + return request_irq(dd->irq_in, msm_spi_qup_irq, IRQF_TRIGGER_HIGH,
> + name, dd);
> +}
> +
> +static inline void msm_spi_free_irq(struct msm_spi *dd,
> + struct spi_master *master)
> +{
> + free_irq(dd->irq_in, dd);
> +}
> +
> +static inline void msm_spi_disable_irqs(struct msm_spi *dd)
> +{
> + disable_irq(dd->irq_in);
> +}
> +
> +static inline void msm_spi_enable_irqs(struct msm_spi *dd)
> +{
> + enable_irq(dd->irq_in);
> +}
> +
> +static inline void msm_spi_get_clk_err(struct msm_spi *dd, u32 *spi_err)
> +{
> + *spi_err = readl(dd->base + QUP_ERROR_FLAGS);
> +}
> +
> +static inline void msm_spi_ack_clk_err(struct msm_spi *dd)
> +{
> + writel(QUP_ERR_MASK, dd->base + QUP_ERROR_FLAGS);
> +}
> +
> +static inline void msm_spi_add_configs(struct msm_spi *dd, u32 *config, int n);
> +
> +/* QUP has no_input, no_output, and N bits at QUP_CONFIG */
> +static inline void msm_spi_set_qup_config(struct msm_spi *dd, int bpw)
> +{
> + u32 qup_config = readl(dd->base + QUP_CONFIG);
> +
> + msm_spi_add_configs(dd, &qup_config, bpw-1);
> + writel(qup_config | QUP_CONFIG_SPI_MODE, dd->base + QUP_CONFIG);
> +}
> +
> +static inline int msm_spi_prepare_for_write(struct msm_spi *dd)
> +{
> + if (msm_spi_set_state(dd, SPI_OP_STATE_RUN))
> + return -EINVAL;
> +
> + if (msm_spi_set_state(dd, SPI_OP_STATE_PAUSE))
> + return -EINVAL;
> +
> + return 0;
> +}
> +
> +static inline void msm_spi_start_write(struct msm_spi *dd, u32 read_count)
> +{
> + if (read_count <= dd->input_fifo_size)
> + msm_spi_write_rmn_to_fifo(dd);
> + else
> + msm_spi_write_word_to_fifo(dd);
> +}
> +
> +static inline void msm_spi_set_write_count(struct msm_spi *dd, int val)
> +{
> + writel(val, dd->base + QUP_MX_WRITE_COUNT);
> +}
> +
> +static inline void msm_spi_complete(struct msm_spi *dd)
> +{
> + dd->done = 1;
> +}
> +
> +static inline void msm_spi_enable_error_flags(struct msm_spi *dd)
> +{
> + writel_relaxed(0x00000078, dd->base + SPI_ERROR_FLAGS_EN);
> +}
> +
> +static inline void msm_spi_clear_error_flags(struct msm_spi *dd)
> +{
> + writel_relaxed(0x0000007C, dd->base + SPI_ERROR_FLAGS);
> +}
While most of these one liners are too few code for a header file IMO.
No need to encapsulate most of it, e.g use the *_irq-calls directly.
Also, please don't use magic values (0x7c) but combine the proper
defines, please.
Thanks,
Wolfram
--
Pengutronix e.K. | Wolfram Sang |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Attachment:
signature.asc
Description: Digital signature
