The MSM 8660 SURF development board contains a register-accessible
FPGA. By default, this FPGA configures the first UART in output-only
mode. On this target, reconfigure this FPGA to enable the UART to be
bidirectional.
Signed-off-by: David Brown <davidb@xxxxxxxxxxxxxx>
---
arch/arm/boot/dts/msm8660-surf.dts | 5 +++
arch/arm/mach-msm/board-msm8x60.c | 48 +++++++++++++++++++++++++++++++++---
2 files changed, 49 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/msm8660-surf.dts b/arch/arm/boot/dts/msm8660-surf.dts
index 15ded0d..3591c94 100644
--- a/arch/arm/boot/dts/msm8660-surf.dts
+++ b/arch/arm/boot/dts/msm8660-surf.dts
@@ -21,4 +21,9 @@
<0x19c00000 0x1000>;
interrupts = <195>;
};
+
+ qcom,fpga@1d000000 {
+ compatible = "qcom,msm8660-surf-fpga";
+ reg = < 0x1d000000 0x1000 >;
+ };
};
diff --git a/arch/arm/mach-msm/board-msm8x60.c b/arch/arm/mach-msm/board-msm8x60.c
index 10fa8f6..db973bb 100644
--- a/arch/arm/mach-msm/board-msm8x60.c
+++ b/arch/arm/mach-msm/board-msm8x60.c
@@ -58,8 +58,51 @@ static void __init msm8x60_init_irq(void)
}
}
+static void __init msm8660_surf_fpga_init(void *fpga_mem)
+{
+ /* Advanced mode */
+ writew(0xFFFF, fpga_mem + 0x15C);
+ /* FPGA_UART_SEL */
+ writew(0, fpga_mem + 0x172);
+ /* FPGA_GPIO_CONFIG_117 */
+ writew(1, fpga_mem + 0xEA);
+ /* FPGA_GPIO_CONFIG_118 */
+ writew(1, fpga_mem + 0xEC);
+ dmb();
+ iounmap(fpga_mem);
+}
+
+static void __init msm8660_surf_fpga_init_platform(void)
+{
+ /* 0x1D000000 now belongs to EBI2:CS3 i.e. USB ISP Controller */
+ void *fpga_mem = ioremap(0x1D000000, SZ_4K);
+ msm8660_surf_fpga_init(fpga_mem);
+}
+
+#ifdef CONFIG_OF
+static void __init msm8660_surf_fpga_init_dt(void)
+{
+ struct device_node *node;
+ void *fpga_mem;
+
+ node = of_find_compatible_node(NULL, NULL, "qcom,msm8660-surf-fpga");
+ if (!node)
+ return;
+
+ fpga_mem = of_iomap(node, 0);
+ of_node_put(node);
+ if (!fpga_mem) {
+ printk(KERN_ERR "%s: Can't map fpga registers\n", __func__);
+ return;
+ }
+
+ msm8660_surf_fpga_init(fpga_mem);
+}
+#endif
+
static void __init msm8x60_init(void)
{
+ msm8660_surf_fpga_init_platform();
}
#ifdef CONFIG_OF
@@ -81,10 +124,7 @@ static void __init msm8x60_dt_init(void)
if (node)
irq_domain_add_simple(node, GIC_SPI_START);
- if (of_machine_is_compatible("qcom,msm8660-surf")) {
- printk(KERN_INFO "Init surf UART registers\n");
- msm8x60_init_uart12dm();
- }
+ msm8660_surf_fpga_init_dt();
of_platform_populate(NULL, of_default_bus_match_table,
msm_auxdata_lookup, NULL);
--
Sent by an employee of the Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
