The bootloaders on MSM always pass the ATAGs address to the kernel in r2. It isn't necessary to set .boot_params in the machine descriptors, and this unnecessarily hinders having a common kernel for multiple targets, so remove them. Signed-off-by: David Brown <davidb@xxxxxxxxxxxxxx> diff --git a/arch/arm/mach-msm/board-msm7x27.c b/arch/arm/mach-msm/board-msm7x27.c index c03f269..f7acdc5 100644 --- a/arch/arm/mach-msm/board-msm7x27.c +++ b/arch/arm/mach-msm/board-msm7x27.c @@ -130,7 +130,6 @@ static void __init msm7x2x_map_io(void) } MACHINE_START(MSM7X27_SURF, "QCT MSM7x27 SURF") - .boot_params = PLAT_PHYS_OFFSET + 0x100, .map_io = msm7x2x_map_io, .init_irq = msm7x2x_init_irq, .init_machine = msm7x2x_init, @@ -138,7 +137,6 @@ MACHINE_START(MSM7X27_SURF, "QCT MSM7x27 SURF") MACHINE_END MACHINE_START(MSM7X27_FFA, "QCT MSM7x27 FFA") - .boot_params = PLAT_PHYS_OFFSET + 0x100, .map_io = msm7x2x_map_io, .init_irq = msm7x2x_init_irq, .init_machine = msm7x2x_init, @@ -146,7 +144,6 @@ MACHINE_START(MSM7X27_FFA, "QCT MSM7x27 FFA") MACHINE_END MACHINE_START(MSM7X25_SURF, "QCT MSM7x25 SURF") - .boot_params = PLAT_PHYS_OFFSET + 0x100, .map_io = msm7x2x_map_io, .init_irq = msm7x2x_init_irq, .init_machine = msm7x2x_init, @@ -154,7 +151,6 @@ MACHINE_START(MSM7X25_SURF, "QCT MSM7x25 SURF") MACHINE_END MACHINE_START(MSM7X25_FFA, "QCT MSM7x25 FFA") - .boot_params = PLAT_PHYS_OFFSET + 0x100, .map_io = msm7x2x_map_io, .init_irq = msm7x2x_init_irq, .init_machine = msm7x2x_init, diff --git a/arch/arm/mach-msm/board-msm7x30.c b/arch/arm/mach-msm/board-msm7x30.c index d1e4cc8..4d5065f 100644 --- a/arch/arm/mach-msm/board-msm7x30.c +++ b/arch/arm/mach-msm/board-msm7x30.c @@ -122,7 +122,6 @@ static void __init msm7x30_map_io(void) } MACHINE_START(MSM7X30_SURF, "QCT MSM7X30 SURF") - .boot_params = PLAT_PHYS_OFFSET + 0x100, .fixup = msm7x30_fixup, .reserve = msm7x30_reserve, .map_io = msm7x30_map_io, @@ -132,7 +131,6 @@ MACHINE_START(MSM7X30_SURF, "QCT MSM7X30 SURF") MACHINE_END MACHINE_START(MSM7X30_FFA, "QCT MSM7X30 FFA") - .boot_params = PLAT_PHYS_OFFSET + 0x100, .fixup = msm7x30_fixup, .reserve = msm7x30_reserve, .map_io = msm7x30_map_io, @@ -142,7 +140,6 @@ MACHINE_START(MSM7X30_FFA, "QCT MSM7X30 FFA") MACHINE_END MACHINE_START(MSM7X30_FLUID, "QCT MSM7X30 FLUID") - .boot_params = PLAT_PHYS_OFFSET + 0x100, .fixup = msm7x30_fixup, .reserve = msm7x30_reserve, .map_io = msm7x30_map_io, diff --git a/arch/arm/mach-msm/board-qsd8x50.c b/arch/arm/mach-msm/board-qsd8x50.c index 6a96911..94cca95 100644 --- a/arch/arm/mach-msm/board-qsd8x50.c +++ b/arch/arm/mach-msm/board-qsd8x50.c @@ -193,7 +193,6 @@ static void __init qsd8x50_init(void) } MACHINE_START(QSD8X50_SURF, "QCT QSD8X50 SURF") - .boot_params = PLAT_PHYS_OFFSET + 0x100, .map_io = qsd8x50_map_io, .init_irq = qsd8x50_init_irq, .init_machine = qsd8x50_init, @@ -201,7 +200,6 @@ MACHINE_START(QSD8X50_SURF, "QCT QSD8X50 SURF") MACHINE_END MACHINE_START(QSD8X50A_ST1_5, "QCT QSD8X50A ST1.5") - .boot_params = PLAT_PHYS_OFFSET + 0x100, .map_io = qsd8x50_map_io, .init_irq = qsd8x50_init_irq, .init_machine = qsd8x50_init, diff --git a/arch/arm/mach-msm/board-sapphire.c b/arch/arm/mach-msm/board-sapphire.c index 68f930f..950a27e 100644 --- a/arch/arm/mach-msm/board-sapphire.c +++ b/arch/arm/mach-msm/board-sapphire.c @@ -105,7 +105,6 @@ static void __init sapphire_map_io(void) MACHINE_START(SAPPHIRE, "sapphire") /* Maintainer: Brian Swetland <swetland@xxxxxxxxxx> */ - .boot_params = PLAT_PHYS_OFFSET + 0x100, .fixup = sapphire_fixup, .map_io = sapphire_map_io, .init_irq = sapphire_init_irq, -- Sent by an employee of the Qualcomm Innovation Center, Inc. The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum. -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
