Hi folks: Here is a proposed patch series which adds the configuration and devices needed to enable gpiolib on the MSM7x30 and QSD8x50 chipsets. Patch 1 adds the register mapping information for all supported MSM/QSD targets. I wasn't sure about adding register definitions for boards which weren't yet using those definitions, but the alternative was to have each following patch change gpio_hw.h over and over, so I put all the definitions in at once. Thoughts? Patch 2 adds the first target, the 7x30, as well as some generic macros to ease the definition of the gpio devices and their platform data, as this is long-winded, but mindless and repetitive work. I considered putting the generic macro-definitions in their own patch, but without any targets to use them it seemed a little silly to leave them on their own and I ended up attaching them to the first patch to use them - what do y'all think? Does it warrant being split up? Patch 3 adds device configuration for the 8x50. Thanks, G Gregory Bean (3): msm: Add gpio register address mapping information. msm: 7x30: Add gpio device configuration. msm: 8x50: add gpio device configuration. arch/arm/mach-msm/board-msm7x30.c | 29 ++++++++- arch/arm/mach-msm/board-qsd8x50.c | 29 ++++++++- arch/arm/mach-msm/devices-msm7x30.c | 23 +++++++ arch/arm/mach-msm/devices-qsd8x50.c | 23 +++++++ arch/arm/mach-msm/devices.h | 35 ++++++++++ arch/arm/mach-msm/gpio_hw-7x30.h | 112 +++++++++++++++++++++++++++++++++ arch/arm/mach-msm/gpio_hw-7xxx.h | 97 ++++++++++++++++++++++++++++ arch/arm/mach-msm/gpio_hw-8x50.h | 112 +++++++++++++++++++++++++++++++++ arch/arm/mach-msm/gpio_hw.h | 35 ++++++++++ arch/arm/mach-msm/include/mach/gpio.h | 2 + 10 files changed, 493 insertions(+), 4 deletions(-) create mode 100644 arch/arm/mach-msm/gpio_hw-7x30.h create mode 100644 arch/arm/mach-msm/gpio_hw-7xxx.h create mode 100644 arch/arm/mach-msm/gpio_hw-8x50.h create mode 100644 arch/arm/mach-msm/gpio_hw.h -- Employee of Qualcomm Innovation Center, Inc. Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum. -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
