On Thu, 2010-02-25 at 20:30 +0100, Pavel Machek wrote: > Hi! > > > > > (and similar error further down). This fixes it, but you probably want > > > > to add machine_is_* to your git. (Aha, is that what you meant by > > > > "machine types"? > > > > > > > > With this patch it compiles. > > > > > > Ok, it compiles, but I do not see it booting. You config has: > > > > > > CONFIG_MSM_DEBUG_UART=3 > > > # CONFIG_MSM_DEBUG_UART_NONE is not set > > > # CONFIG_MSM_DEBUG_UART1 is not set > > > # CONFIG_MSM_DEBUG_UART2 is not set > > > CONFIG_MSM_DEBUG_UART3=y > > > ... > > > CONFIG_DEBUG_LL=y > > > CONFIG_EARLY_PRINTK=y > > > > > > set, so I'd expect it to say something on the serial line... (right? > > > Or do I still need to patch printk.c to get that?). And I see nothing > > > :-(. > > > > > > I'm using > > > > > > ./fastboot -c "console=ttyMSM2 root=/dev/mmcblk0p1 rootdelay=5 fbcon=rotate:1" boot /data/l/linux-dwalker/arch/arm/boot/zImage > > > > > > ...with different kernel, it works (as in "I get most of the boot on > > > serial line; it will not actually mount root"). > > > > Have you seen this error? > ... > > /home/dwalker/linux-2.6/drivers/video/msm/msm_fb.c:24: fatal error: linux/msm_mdp.h: No such file or directory > > compilation terminated. > > make[4]: *** [drivers/video/msm/msm_fb.o] Error 1 > > make[3]: *** [drivers/video/msm] Error 2 > > make[3]: *** Waiting for unfinished jobs.... > > make[2]: *** [drivers/video] Error 2 > > make[1]: *** [drivers] Error 2 > > make: *** [sub-make] Error 2 > > Yes, framebuffer has problems. > > > Even with the framebuffer off I still don't get any serial output on a > > plain 2.6.33-rc6 .. I'm using a config that you sent me when you first > > tested my -next tree . > > 2.6.33 boots here, with attached config. I'll try -next next. My -next tree hasn't changed much since you last looked at it .. I wouldn't bother testing it. I might take some small fixes from that tree to merge, but what's there is still too much of a mess to merge. I just pushed another tree called "working-mmc" which still needs some clean up but should have working mmc if you want to test that. Daniel -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
