On Sun, 2010-01-31 at 10:28 +0100, Pavel Machek wrote: > Hi! > > > > > > > This adds missing include files, so it should now compile. ifdef > > > > > > guards were added to Kconfig, so it should not cause problems on > > > > > > non-arch-msm machines. > > > > > > > > > > > > Signed-off-by: Pavel Machek <pavel@xxxxxx> > > > > > > > > > > Odd, this doesn't apply to the linux-next tree, some of the files are > > > > > already there. > > > > > > > > Strange, it seems it is almost all already in. Well, good :-). > > > > > > > > But there's small problem. linux-next now contains dwalker's tree, and > > > > I could not get it to compile, even with staging disabled. I'll need > > > > to look into that. > > > > > > I worked on it a little, but I won't have time to really start cleaning > > > up that tree till next week, or this weekend. > > > > > > I pushed a new tree for next that should compile for dream with the > > > attached config. I also included the patch that I added to get it to > > > compile (you'll need the machine types too which I didn't include). > > > > Thanks! I checked out linux-next version, and it seems to include > > > > > commit cdf6c137865357112aa31666b65b938ab29fa736 > > > msm: compile fixes for dream. > > > > this patch. It still fails with: > > > > arch/arm/mach-msm/rpc_hsusb.c: In function 'msm_chg_rpc_connect': > > arch/arm/mach-msm/rpc_hsusb.c:156: error: implicit declaration of > > function 'machine_is_msm7201a_surf' > > arch/arm/mach-msm/rpc_hsusb.c:156: error: implicit declaration of > > function 'machine_is_msm7x27_surf' > > arch/arm/mach-msm/rpc_hsusb.c:157: error: implicit declaration of > > function 'machine_is_qsd8x50_surf' > > make[1]: *** [arch/arm/mach-msm/rpc_hsusb.o] Error 1 > > make: *** [arch/arm/mach-msm] Error 2 > > > > (and similar error further down). This fixes it, but you probably want > > to add machine_is_* to your git. (Aha, is that what you meant by > > "machine types"? > > > > With this patch it compiles. > > Ok, it compiles, but I do not see it booting. You config has: > > CONFIG_MSM_DEBUG_UART=3 > # CONFIG_MSM_DEBUG_UART_NONE is not set > # CONFIG_MSM_DEBUG_UART1 is not set > # CONFIG_MSM_DEBUG_UART2 is not set > CONFIG_MSM_DEBUG_UART3=y > ... > CONFIG_DEBUG_LL=y > CONFIG_EARLY_PRINTK=y > > set, so I'd expect it to say something on the serial line... (right? > Or do I still need to patch printk.c to get that?). And I see nothing > :-(. > > I'm using > > ./fastboot -c "console=ttyMSM2 root=/dev/mmcblk0p1 rootdelay=5 fbcon=rotate:1" boot /data/l/linux-dwalker/arch/arm/boot/zImage > > ...with different kernel, it works (as in "I get most of the boot on > serial line; it will not actually mount root"). Have you seen this error? GEN /local/mnt/workspace/c_dwalke/git-trees/dream-test/Makefile scripts/kconfig/conf -s arch/arm/Kconfig GEN /local/mnt/workspace/c_dwalke/git-trees/dream-test/Makefile CHK include/linux/version.h CHK include/generated/utsrelease.h Using /local/mnt/workspace/c_dwalke/git-trees/linux-2.6 as source for kernel make[2]: `include/generated/mach-types.h' is up to date. CALL /local/mnt/workspace/c_dwalke/git-trees/linux-2.6/scripts/checksyscalls.sh CHK include/generated/compile.h GZIP kernel/config_data.gz IKCFG kernel/config_data.h CC kernel/configs.o LD kernel/built-in.o CC drivers/video/msm/msm_fb.o CC drivers/video/cfbcopyarea.o /home/dwalker/linux-2.6/drivers/video/msm/msm_fb.c:24: fatal error: linux/msm_mdp.h: No such file or directory compilation terminated. make[4]: *** [drivers/video/msm/msm_fb.o] Error 1 make[3]: *** [drivers/video/msm] Error 2 make[3]: *** Waiting for unfinished jobs.... make[2]: *** [drivers/video] Error 2 make[1]: *** [drivers] Error 2 make: *** [sub-make] Error 2 Even with the framebuffer off I still don't get any serial output on a plain 2.6.33-rc6 .. I'm using a config that you sent me when you first tested my -next tree . Daniel -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
