[RFC PATCH v2 03/31] Documentation: Add binding for kalray,kv3-1-apic-gic

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Jules Maselbas <jmaselbas@xxxxxxxxx>

Add documentation for `kalray,kv3-1-apic-gic` binding.

Co-developed-by: Jules Maselbas <jmaselbas@xxxxxxxxx>
Signed-off-by: Jules Maselbas <jmaselbas@xxxxxxxxx>
Signed-off-by: Yann Sionneau <ysionneau@xxxxxxxxx>
---

Notes:
    V1 -> V2: new patch

 .../kalray,kv3-1-apic-gic.yaml                | 66 +++++++++++++++++++
 1 file changed, 66 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/interrupt-controller/kalray,kv3-1-apic-gic.yaml

diff --git a/Documentation/devicetree/bindings/interrupt-controller/kalray,kv3-1-apic-gic.yaml b/Documentation/devicetree/bindings/interrupt-controller/kalray,kv3-1-apic-gic.yaml
new file mode 100644
index 000000000000..7a37f19db2fb
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/kalray,kv3-1-apic-gic.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/kalray,kv3-1-apic-gic#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Kalray kv3-1 APIC-GIC
+
+description: |
+  Each cluster in the Coolidge SoC includes an Advanced Programmable Interrupt
+  Controller (APIC) which is split in two part:
+    - a Generic Interrupt Controller (referred as APIC-GIC)
+    - a Mailbox Controller           (referred as APIC-Mailbox)
+  The APIC-GIC acts as an intermediary interrupt controller, muxing/routing
+  incoming interrupts to output interrupts connected to kvx cores interrupts lines.
+  The 139 possible input interrupt lines are organized as follow:
+     - 128 from the mailbox controller (one it per mailboxes)
+     - 1   from the NoC router
+     - 5   from IOMMUs
+     - 1   from L2 cache DMA job FIFO
+     - 1   from cluster watchdog
+     - 2   for SECC, DECC
+     - 1   from Data NoC
+  The 72 possible output interrupt lines:
+     -  68 : 4 interrupts per cores (17 cores)
+     -  1 for L2 cache controller
+     -  3 extra that are for padding
+
+allOf:
+  - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+  compatible:
+    const: kalray,kv3-1-apic-gic
+  "#interrupt-cells":
+    const: 1
+    description:
+      The IRQ number.
+  interrupt-controller: true
+  interrupt-parent: true
+  interrupts:
+    maxItems: 4
+    description: |
+     Specifies the interrupt line(s) in the interrupt-parent controller node;
+     valid values depend on the type of parent interrupt controller
+
+required:
+  - compatible
+  - reg
+  - "#interrupt-cells"
+  - interrupt-controller
+  - interrupt-parent
+  - interrupts
+
+examples:
+  - |
+    apic_gic: interrupt-controller@a20000 {
+        compatible = "kalray,kv3-1-apic-gic";
+        reg = <0 0xa20000 0 0x12000>;
+        #interrupt-cells = <1>;
+        interrupt-controller;
+        interrupt-parent = <&intc>;
+        interrups = <4 5 6 7>;
+    };
+
+...
-- 
2.37.2








[Index of Archives]     [Linux Kernel]     [Kernel Newbies]     [x86 Platform Driver]     [Netdev]     [Linux Wireless]     [Netfilter]     [Bugtraq]     [Linux Filesystems]     [Yosemite Discussion]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Device Mapper]

  Powered by Linux