Re: [PATCH v15 0/6] Add NUMA-awareness to qspinlock

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi, all.

A couple of quick updates regarding the patch series.

First, I am working to collect more performance data for the patch.
In particular, I measured up to 14% throughput improvement for RocksDB[1]
and 26% improvement for a few sybench[2] benchmarks. The details appear
below. sybench also has a number of OLTP-like benchmarks; those do not show
sensitivity to CNA -- no improvements, no regressions.

Second, we became aware of the work by researchers at Huawei Dresden
Research Center who verified the correctness of CNA on weak memory
models: https://arxiv.org/pdf/2111.15240.pdf. The authors found the
CNA patch series (with some minor simplifications) to be correct in the
Linux kernel memory model. For further details, please refer to the paper.

=============

The following results are from an Oracle X5-8 server (eight Intel Xeon
E7-8895 v3 @ 2.60GHz sockets with 18 hyperthreaded cores each). Note
that this system is different from the one I was normally using for testing,
as the latter is going through repairs. Each number represents average
throughput over 25 runs. The standard deviation is also reported in ().

The throughput results (ops/us) for RocksDB (v6.26.0) ‘readrandom’ benchmark:
#thr  	 stock      CNA          / speedup
  1  0.131 (0.004) 0.130 (0.005) / 0.989
  2  0.232 (0.005) 0.230 (0.004) / 0.991
  4  0.437 (0.008) 0.430 (0.009) / 0.985
  8  0.560 (0.015) 0.563 (0.014) / 1.004
 16  0.699 (0.017) 0.690 (0.032) / 0.986
 32  0.738 (0.029) 0.763 (0.028) / 1.034
 64  0.597 (0.014) 0.631 (0.012) / 1.057
 72  0.591 (0.010) 0.623 (0.012) / 1.054
144  0.569 (0.010) 0.636 (0.012) / 1.117
216  0.540 (0.008) 0.615 (0.009) / 1.139
286  0.527 (0.005) 0.579 (0.009) / 1.099

The throughput results (events/ms) for sysbench ’threads’ benchmark:
#thr  	 stock      CNA          / speedup
  1  2168.245 (11.715) 2169.734 (8.042) / 1.001
  2  1016.283 (48.849) 1097.674 (19.516) / 1.080
  4  1220.588 (17.383) 1229.191 (11.928) / 1.007
  8  1048.581 (46.102) 1036.614 (13.365) / 0.989
 16  804.573 (30.343) 832.324 (26.457) / 1.034
 32  799.307 (39.315) 869.813 (9.352) / 1.088
 64  688.387 (7.312) 812.554 (19.414) / 1.180
 72  681.979 (16.198) 825.458 (8.655) / 1.210
144  606.460 (5.277) 759.814 (7.027) / 1.253
216  580.517 (6.718) 719.856 (8.381) / 1.240
286  527.053 (12.382) 659.322 (12.527) / 1.251

The throughput results (events/ms) for sysbench ’mutex’ benchmark:
  1  15.218 (0.064) 14.986 (0.080) / 0.985
  2  6.043 (0.953) 6.058 (0.856) / 1.003
  4  5.852 (0.132) 5.761 (0.295) / 0.984
  8  3.291 (0.054) 3.241 (0.143) / 0.985
 16  2.931 (0.036) 3.437 (0.150) / 1.173
 32  2.863 (0.058) 3.267 (0.124) / 1.141
 64  2.457 (0.099) 3.101 (0.024) / 1.262
 72  2.438 (0.060) 3.054 (0.079) / 1.253
144  2.399 (0.042) 3.007 (0.056) / 1.253
216  2.413 (0.033) 2.697 (0.044) / 1.118
286  2.029 (0.033) 2.288 (0.015) / 1.128

Best regards,
— Alex

[1] https://github.com/facebook/rocksdb
[2] https://github.com/akopytov/sysbench

> On May 14, 2021, at 4:07 PM, Alex Kogan <alex.kogan@xxxxxxxxxx> wrote:
> 
> Changes from v14:
> ----------------
> 
> - Change the way the main queue is scanned and reordered in
> cna_wait_head_or_lock(), based on Peter's suggestion.
> 
> In detail: instead of inspecting only one queue node, we now scan
> (and move nodes into the secondary queue) as long as the lock
> remains busy. This simplified the code quite a bit, as we don't need
> to call cna_order_queue() again from cna_lock_handoff(). 
> 
> - Use local_clock() instead of relying on jiffies to decide when to
> flush the secondary queue, per Andy's suggestion.
> 
> - Use module_param() for numa_spinlock_threshold_ns, so it can be tweaked
> at runtime, per Andy's suggestion.
> 
> - Reduce the default value for numa_spinlock_threshold_ns to 1ms based on
> the comments from Andy and Peter. The performance numbers below include
> results with the new default as well as with the value of 10ms, which was 
> the default threshold in previous revisions of the series.
> 
> Summary
> -------
> 
> Lock throughput can be increased by handing a lock to a waiter on the
> same NUMA node as the lock holder, provided care is taken to avoid
> starvation of waiters on other NUMA nodes. This patch introduces CNA
> (compact NUMA-aware lock) as the slow path for qspinlock. It is
> enabled through a configuration option (NUMA_AWARE_SPINLOCKS).
> 
> CNA is a NUMA-aware version of the MCS lock. Spinning threads are
> organized in two queues, a primary queue for threads running on the same
> node as the current lock holder, and a secondary queue for threads
> running on other nodes. Threads store the ID of the node on which
> they are running in their queue nodes. After acquiring the MCS lock and
> before acquiring the spinlock, the MCS lock holder checks whether the next
> waiter in the primary queue (if exists) is running on the same NUMA node.
> If it is not, that waiter is detached from the main queue and moved into
> the tail of the secondary queue. This way, we gradually filter the primary
> queue, leaving only waiters running on the same preferred NUMA node. Note
> that certain priortized waiters (e.g., in irq and nmi contexts) are
> excluded from being moved to the secondary queue. We change the NUMA node
> preference after a waiter at the head of the secondary queue spins for a
> certain amount of time. We do that by flushing the secondary queue into
> the head of the primary queue, effectively changing the preference to the
> NUMA node of the waiter at the head of the secondary queue at the time of
> the flush.
> 
> More details are available at https://arxiv.org/abs/1810.05600.
> 
> We have done some performance evaluation with the locktorture module
> as well as with several benchmarks from the will-it-scale repo.
> The following locktorture results are from an Oracle X5-4 server
> (four Intel Xeon E7-8895 v3 @ 2.60GHz sockets with 18 hyperthreaded
> cores each). Each number represents an average (over 25 runs) of the
> total number of ops (x10^7) reported at the end of each run. The 
> standard deviation is also reported in (), and in general is about 3%
> from the average. The 'stock' kernel is v5.12.0,
> commit 3cf5c8ea3a66, compiled in the default configuration. 
> 'CNA' is the modified kernel with NUMA_AWARE_SPINLOCKS set and
> the new default threshold of 1ms for flushing the secondary queue
> (numa_spinlock_threshold_ns); 'CNA-10ms' is the same as CNA, 
> but uses the threshold of 10ms. The speedup is calculated by dividing 
> the result of 'CNA' and 'CNA-10ms', respectively, by the result
> achieved with 'stock'.
> 
> #thr  	 stock      CNA          / speedup  CNA-10ms    / speedup
>  1  2.695 (0.108) 2.704 (0.099) / 1.003  2.712 (0.077) / 1.006
>  2  2.753 (0.187) 2.785 (0.171) / 1.012  2.822 (0.174) / 1.025
>  4  4.355 (0.139) 4.417 (0.179) / 1.014  4.361 (0.181) / 1.001
>  8  5.163 (0.119) 7.017 (0.195) / 1.359  7.369 (0.186) / 1.427
> 16  5.944 (0.134) 9.110 (0.242) / 1.532  9.187 (0.233) / 1.546
> 32  6.310 (0.082) 9.710 (0.156) / 1.539  9.827 (0.161) / 1.557
> 36  6.374 (0.112) 9.777 (0.141) / 1.534  9.830 (0.124) / 1.542
> 72  6.170 (0.139) 9.922 (0.190) / 1.608  9.945 (0.136) / 1.612
> 108  6.002 (0.089) 9.651 (0.176) / 1.608  9.847 (0.125) / 1.641
> 142  5.784 (0.079) 9.477 (0.089) / 1.638  9.641 (0.113) / 1.667
> 
> The following tables contain throughput results (ops/us) from the same
> setup for will-it-scale/open1_threads: 
> 
> #thr  	 stock      CNA          / speedup  CNA-10ms    / speedup
>  1  0.503 (0.004) 0.501 (0.001) / 0.996  0.503 (0.002) / 1.000
>  2  0.783 (0.014) 0.773 (0.011) / 0.988  0.774 (0.016) / 0.989
>  4  1.422 (0.025) 1.398 (0.030) / 0.983  1.403 (0.025) / 0.987
>  8  1.753 (0.104) 1.641 (0.132) / 0.936  1.675 (0.134) / 0.956
> 16  1.851 (0.097) 1.760 (0.103) / 0.951  1.774 (0.119) / 0.959
> 32  0.905 (0.081) 1.708 (0.081) / 1.888  1.738 (0.069) / 1.922
> 36  0.895 (0.058) 1.726 (0.065) / 1.928  1.735 (0.081) / 1.938
> 72  0.823 (0.033) 1.610 (0.067) / 1.957  1.647 (0.067) / 2.002
> 108  0.845 (0.035) 1.588 (0.054) / 1.878  1.740 (0.067) / 2.058
> 142  0.840 (0.030) 1.546 (0.042) / 1.839  1.740 (0.048) / 2.070
> 
> and will-it-scale/lock2_threads:
> 
> #thr  	 stock      CNA          / speedup  CNA-10ms    / speedup
>  1  1.551 (0.003) 1.558 (0.006) / 1.005  1.558 (0.003) / 1.005
>  2  2.722 (0.064) 2.704 (0.063) / 0.993  2.727 (0.058) / 1.002
>  4  5.286 (0.178) 5.360 (0.151) / 1.014  5.360 (0.135) / 1.014
>  8  4.115 (0.297) 3.906 (0.383) / 0.949  4.062 (0.366) / 0.987
> 16  4.119 (0.121) 3.950 (0.131) / 0.959  4.009 (0.132) / 0.973
> 32  2.508 (0.097) 3.805 (0.106) / 1.517  3.960 (0.091) / 1.579
> 36  2.457 (0.101) 3.810 (0.072) / 1.551  3.931 (0.106) / 1.600
> 72  1.913 (0.103) 3.530 (0.070) / 1.845  3.860 (0.078) / 2.018
> 108  1.891 (0.109) 3.410 (0.079) / 1.803  3.881 (0.097) / 2.052
> 142  1.752 (0.096) 3.236 (0.080) / 1.847  3.774 (0.078) / 2.155
> 
> Our evaluation shows that CNA also improves performance of user 
> applications that have hot pthread mutexes. Those mutexes are 
> blocking, and waiting threads park and unpark via the futex 
> mechanism in the kernel. Given that kernel futex chains, which
> are hashed by the mutex address, are each protected by a 
> chain-specific spin lock, the contention on a user-mode mutex 
> translates into contention on a kernel level spinlock. 
> 
> Here are the throughput results (ops/us) for the leveldb ‘readrandom’
> benchmark:
> 
> #thr  	 stock      CNA          / speedup  CNA-10ms    / speedup
>  1  0.533 (0.011) 0.539 (0.014) / 1.012  0.536 (0.013) / 1.006
>  2  0.854 (0.022) 0.856 (0.017) / 1.003  0.857 (0.020) / 1.004
>  4  1.236 (0.028) 1.238 (0.054) / 1.002  1.217 (0.054) / 0.985
>  8  1.207 (0.117) 1.198 (0.122) / 0.993  1.155 (0.138) / 0.957
> 16  0.758 (0.055) 1.128 (0.118) / 1.489  1.068 (0.131) / 1.409
> 32  0.743 (0.027) 1.153 (0.028) / 1.551  1.147 (0.021) / 1.543
> 36  0.708 (0.027) 1.150 (0.024) / 1.623  1.137 (0.026) / 1.605
> 72  0.629 (0.016) 1.112 (0.019) / 1.767  1.134 (0.019) / 1.802
> 108  0.610 (0.012) 1.053 (0.018) / 1.725  1.130 (0.017) / 1.853
> 142  0.606 (0.013) 1.008 (0.020) / 1.664  1.110 (0.023) / 1.833
> 
> Further comments are welcome and appreciated.
> 
> Alex Kogan (6):
>  locking/qspinlock: Rename mcs lock/unlock macros and make them more
>    generic
>  locking/qspinlock: Refactor the qspinlock slow path
>  locking/qspinlock: Introduce CNA into the slow path of qspinlock
>  locking/qspinlock: Introduce starvation avoidance into CNA
>  locking/qspinlock: Avoid moving certain threads between waiting queues
>    in CNA
>  locking/qspinlock: Introduce the shuffle reduction optimization into
>    CNA
> 
> .../admin-guide/kernel-parameters.txt         |  18 +
> arch/arm/include/asm/mcs_spinlock.h           |   6 +-
> arch/x86/Kconfig                              |  20 +
> arch/x86/include/asm/qspinlock.h              |   4 +
> arch/x86/kernel/alternative.c                 |   4 +
> include/asm-generic/mcs_spinlock.h            |   4 +-
> kernel/locking/mcs_spinlock.h                 |  20 +-
> kernel/locking/qspinlock.c                    |  82 +++-
> kernel/locking/qspinlock_cna.h                | 425 ++++++++++++++++++
> kernel/locking/qspinlock_paravirt.h           |   2 +-
> 10 files changed, 562 insertions(+), 23 deletions(-)
> create mode 100644 kernel/locking/qspinlock_cna.h
> 
> -- 
> 2.24.3 (Apple Git-128)
> 





[Index of Archives]     [Linux Kernel]     [Kernel Newbies]     [x86 Platform Driver]     [Netdev]     [Linux Wireless]     [Netfilter]     [Bugtraq]     [Linux Filesystems]     [Yosemite Discussion]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Device Mapper]

  Powered by Linux