Re: [PATCH v2 2/2] arm64: tlb: Use the TLBI RANGE feature in arm64

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Jon,

On 2020/7/13 22:27, Jon Hunter wrote:
> After this change I am seeing the following build errors ...
> 
> /tmp/cckzq3FT.s: Assembler messages:
> /tmp/cckzq3FT.s:854: Error: unknown or missing operation name at operand 1 -- `tlbi rvae1is,x7'
> /tmp/cckzq3FT.s:870: Error: unknown or missing operation name at operand 1 -- `tlbi rvae1is,x7'
> /tmp/cckzq3FT.s:1095: Error: unknown or missing operation name at operand 1 -- `tlbi rvae1is,x7'
> /tmp/cckzq3FT.s:1111: Error: unknown or missing operation name at operand 1 -- `tlbi rvae1is,x7'
> /tmp/cckzq3FT.s:1964: Error: unknown or missing operation name at operand 1 -- `tlbi rvae1is,x7'
> /tmp/cckzq3FT.s:1980: Error: unknown or missing operation name at operand 1 -- `tlbi rvae1is,x7'
> /tmp/cckzq3FT.s:2286: Error: unknown or missing operation name at operand 1 -- `tlbi rvae1is,x7'
> /tmp/cckzq3FT.s:2302: Error: unknown or missing operation name at operand 1 -- `tlbi rvae1is,x7'
> /tmp/cckzq3FT.s:4833: Error: unknown or missing operation name at operand 1 -- `tlbi rvae1is,x6'
> /tmp/cckzq3FT.s:4849: Error: unknown or missing operation name at operand 1 -- `tlbi rvae1is,x6'
> /tmp/cckzq3FT.s:5090: Error: unknown or missing operation name at operand 1 -- `tlbi rvae1is,x6'
> /tmp/cckzq3FT.s:5106: Error: unknown or missing operation name at operand 1 -- `tlbi rvae1is,x6'
> /tmp/cckzq3FT.s:874: Error: attempt to move .org backwards
> /tmp/cckzq3FT.s:1115: Error: attempt to move .org backwards
> /tmp/cckzq3FT.s:1984: Error: attempt to move .org backwards
> /tmp/cckzq3FT.s:2306: Error: attempt to move .org backwards
> /tmp/cckzq3FT.s:4853: Error: attempt to move .org backwards
> /tmp/cckzq3FT.s:5110: Error: attempt to move .org backwards
> scripts/Makefile.build:280: recipe for target 'arch/arm64/mm/hugetlbpage.o' failed
> make[3]: *** [arch/arm64/mm/hugetlbpage.o] Error 1
> scripts/Makefile.build:497: recipe for target 'arch/arm64/mm' failed
> make[2]: *** [arch/arm64/mm] Error 2
> 
> Cheers
> Jon
> 

The code must be built with binutils >= 2.30.
Maybe I should add  a check on whether binutils supports ARMv8.4-a instructions...

Thanks,
Zhenyu




[Index of Archives]     [Linux Kernel]     [Kernel Newbies]     [x86 Platform Driver]     [Netdev]     [Linux Wireless]     [Netfilter]     [Bugtraq]     [Linux Filesystems]     [Yosemite Discussion]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Device Mapper]

  Powered by Linux