Re: [PATCH v2 4/4] nmi_backtrace: generate one-line reports for idle cpus

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 03/21/2016 12:32 PM, Peter Zijlstra wrote:
On Mon, Mar 21, 2016 at 12:15:12PM -0400, Chris Metcalf wrote:
On 03/21/2016 11:42 AM, Peter Zijlstra wrote:
The most common idle function for x86 is: mwait_idle_with_hints(),
trouble is, its an inline, so I'm not sure adding __cpuidle to it does
anything.
No, you're right, it wouldn't help.  I didn't look at the drivers/cpuidle
subsystem at all in my patch, since I'm not that familiar with it,
but it seems like tagging acpi_processor_ffh_cstate_enter(), as the
only user of mwait_idle_with_hints(), will do the job.
intel_idle() also uses it.

Ah, of course.  I was only looking at the config options enabled in the
kernel I was building.  I've added INTEL_IDLE now and grep'ed the whole
kernel tree as well, finding a couple of extra possibilities:

I do see mwait used in the ACPI 4.0 Processor Aggregator Device driver, but
this seems sufficiently far removed from regular cpuidle that I don't
think it's appropriate to tag the power_saving_thread() function -
the initial commit talks about using the mechanism "to ride-out
transient electrical and thermal emergencies."

There's also the thermal "powerclamp" driver that enforces a particular
amount of idle time across the system.  For this one it's less clear to
me whether this is a valid "idle" state that we should ignore when doing
NMI backtracing.  This would be the clamp_thread() function in
drivers/thermal/intel_powerclamp.c.  For now I'm not including it,
but what do you think?

# nm -n ivb-ep-build/vmlinux | awk '/__cpuidle_text_start/ {p=1} {if (p) print $0} /__cpuidle_text_end/ {p=0}'
ffffffff81b16ca8 T __cpuidle_text_start
ffffffff81b16cb0 T default_idle
ffffffff81b16e50 t mwait_idle
ffffffff81b17080 t cpu_idle_poll
ffffffff81b17280 T default_idle_call
ffffffff81b172be T __cpuidle_text_end

So no intel_idle for me..

With the changes discussed so far in this email thread, we've gotten to:

ffffffff818df178 T __cpuidle_text_start
ffffffff818df180 T default_idle
ffffffff818df260 t mwait_idle
ffffffff818df3f0 T acpi_processor_ffh_cstate_enter
ffffffff818df4a0 T default_idle_call
ffffffff818df4e0 t cpu_idle_poll
ffffffff818df600 t intel_idle_freeze
ffffffff818df6a0 t intel_idle
ffffffff818df7b5 T __cpuidle_text_end

This is about 1,600 bytes (or about 450 instructions) that will cause
NMI to skip doing a backtrace if the PC is anywhere in the range.

--
Chris Metcalf, Mellanox Technologies
http://www.mellanox.com

--
To unsubscribe from this list: send the line "unsubscribe linux-arch" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Kernel]     [Kernel Newbies]     [x86 Platform Driver]     [Netdev]     [Linux Wireless]     [Netfilter]     [Bugtraq]     [Linux Filesystems]     [Yosemite Discussion]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Device Mapper]

  Powered by Linux