Use the generic idle loop and replace enable/disable_hlt with the
respective core functions.
Signed-off-by: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
Cc: Russell King <linux@xxxxxxxxxxxxxxxx>
---
arch/arm/Kconfig | 2
arch/arm/include/asm/system_misc.h | 3 -
arch/arm/kernel/process.c | 96 ++++++++++---------------------------
arch/arm/kernel/smp.c | 2
arch/arm/mach-gemini/idle.c | 4 +
arch/arm/mach-gemini/irq.c | 2
arch/arm/mach-ixp4xx/common.c | 2
arch/arm/mach-omap1/pm.c | 5 -
arch/arm/mach-omap2/omap_hwmod.c | 6 +-
arch/arm/mach-omap2/pm.c | 5 -
arch/arm/mach-orion5x/board-dt.c | 2
arch/arm/mach-orion5x/common.c | 2
arch/arm/mach-shark/core.c | 2
arch/arm/mach-shmobile/suspend.c | 4 -
arch/arm/mach-w90x900/dev.c | 2
15 files changed, 47 insertions(+), 92 deletions(-)
Index: linux-2.6/arch/arm/Kconfig
===================================================================
--- linux-2.6.orig/arch/arm/Kconfig
+++ linux-2.6/arch/arm/Kconfig
@@ -15,6 +15,8 @@ config ARM
select GENERIC_IRQ_SHOW
select GENERIC_PCI_IOMAP
select GENERIC_SMP_IDLE_THREAD
+ select GENERIC_IDLE_LOOP
+ select GENERIC_IDLE_POLL_SETUP
select GENERIC_STRNCPY_FROM_USER
select GENERIC_STRNLEN_USER
select HARDIRQS_SW_RESEND
Index: linux-2.6/arch/arm/include/asm/system_misc.h
===================================================================
--- linux-2.6.orig/arch/arm/include/asm/system_misc.h
+++ linux-2.6/arch/arm/include/asm/system_misc.h
@@ -21,9 +21,6 @@ extern void (*arm_pm_idle)(void);
extern unsigned int user_debug;
-extern void disable_hlt(void);
-extern void enable_hlt(void);
-
#endif /* !__ASSEMBLY__ */
#endif /* __ASM_ARM_SYSTEM_MISC_H */
Index: linux-2.6/arch/arm/kernel/process.c
===================================================================
--- linux-2.6.orig/arch/arm/kernel/process.c
+++ linux-2.6/arch/arm/kernel/process.c
@@ -57,34 +57,6 @@ static const char *isa_modes[] = {
"ARM" , "Thumb" , "Jazelle", "ThumbEE"
};
-static volatile int hlt_counter;
-
-void disable_hlt(void)
-{
- hlt_counter++;
-}
-
-void enable_hlt(void)
-{
- hlt_counter--;
- BUG_ON(hlt_counter < 0);
-}
-
-static int __init nohlt_setup(char *__unused)
-{
- hlt_counter = 1;
- return 1;
-}
-
-static int __init hlt_setup(char *__unused)
-{
- hlt_counter = 0;
- return 1;
-}
-
-__setup("nohlt", nohlt_setup);
-__setup("hlt", hlt_setup);
-
extern void call_with_stack(void (*fn)(void *), void *arg, void *sp);
typedef void (*phys_reset_t)(unsigned long);
@@ -168,54 +140,38 @@ static void default_idle(void)
local_irq_enable();
}
-/*
- * The idle thread.
- * We always respect 'hlt_counter' to prevent low power idle.
- */
-void cpu_idle(void)
+void arch_cpu_idle_prepare(void)
{
local_fiq_enable();
+}
- /* endless idle loop with no priority at all */
- while (1) {
- tick_nohz_idle_enter();
- rcu_idle_enter();
- ledtrig_cpu(CPU_LED_IDLE_START);
- while (!need_resched()) {
-#ifdef CONFIG_HOTPLUG_CPU
- if (cpu_is_offline(smp_processor_id()))
- cpu_die();
+void arch_cpu_idle_enter(void)
+{
+ ledtrig_cpu(CPU_LED_IDLE_START);
+#ifdef CONFIG_PL310_ERRATA_769419
+ wmb();
#endif
+}
- /*
- * We need to disable interrupts here
- * to ensure we don't miss a wakeup call.
- */
- local_irq_disable();
-#ifdef CONFIG_PL310_ERRATA_769419
- wmb();
+void arch_cpu_idle_exit(void)
+{
+ ledtrig_cpu(CPU_LED_IDLE_END);
+}
+
+#ifdef CONFIG_HOTPLUG_CPU
+void arch_cpu_idle_dead(void)
+{
+ cpu_die();
+}
#endif
- if (hlt_counter) {
- local_irq_enable();
- cpu_relax();
- } else if (!need_resched()) {
- stop_critical_timings();
- if (cpuidle_idle_call())
- default_idle();
- start_critical_timings();
- /*
- * default_idle functions must always
- * return with IRQs enabled.
- */
- WARN_ON(irqs_disabled());
- } else
- local_irq_enable();
- }
- ledtrig_cpu(CPU_LED_IDLE_END);
- rcu_idle_exit();
- tick_nohz_idle_exit();
- schedule_preempt_disabled();
- }
+
+/*
+ * Called from the core idle loop.
+ */
+void arch_cpu_idle(void)
+{
+ if (cpuidle_idle_call())
+ default_idle();
}
static char reboot_mode = 'h';
Index: linux-2.6/arch/arm/kernel/smp.c
===================================================================
--- linux-2.6.orig/arch/arm/kernel/smp.c
+++ linux-2.6/arch/arm/kernel/smp.c
@@ -336,7 +336,7 @@ asmlinkage void __cpuinit secondary_star
/*
* OK, it's off to the idle thread for us
*/
- cpu_idle();
+ cpu_startup_entry(CPUHP_ONLINE);
}
void __init smp_cpus_done(unsigned int max_cpus)
Index: linux-2.6/arch/arm/mach-gemini/idle.c
===================================================================
--- linux-2.6.orig/arch/arm/mach-gemini/idle.c
+++ linux-2.6/arch/arm/mach-gemini/idle.c
@@ -13,9 +13,11 @@ static void gemini_idle(void)
* will never wakeup... Acctualy it is not very good to enable
* interrupts first since scheduler can miss a tick, but there is
* no other way around this. Platforms that needs it for power saving
- * should call enable_hlt() in init code, since by default it is
+ * should enable it in init code, since by default it is
* disabled.
*/
+
+ /* FIXME: Enabling interrupts here is racy! */
local_irq_enable();
cpu_do_idle();
}
Index: linux-2.6/arch/arm/mach-gemini/irq.c
===================================================================
--- linux-2.6.orig/arch/arm/mach-gemini/irq.c
+++ linux-2.6/arch/arm/mach-gemini/irq.c
@@ -77,7 +77,7 @@ void __init gemini_init_irq(void)
* Disable the idle handler by default since it is buggy
* For more info see arch/arm/mach-gemini/idle.c
*/
- disable_hlt();
+ cpu_idle_poll_ctrl(true);
request_resource(&iomem_resource, &irq_resource);
Index: linux-2.6/arch/arm/mach-ixp4xx/common.c
===================================================================
--- linux-2.6.orig/arch/arm/mach-ixp4xx/common.c
+++ linux-2.6/arch/arm/mach-ixp4xx/common.c
@@ -239,7 +239,7 @@ void __init ixp4xx_init_irq(void)
* ixp4xx does not implement the XScale PWRMODE register
* so it must not call cpu_do_idle().
*/
- disable_hlt();
+ cpu_idle_poll_ctrl(true);
/* Route all sources to IRQ instead of FIQ */
*IXP4XX_ICLR = 0x0;
Index: linux-2.6/arch/arm/mach-omap1/pm.c
===================================================================
--- linux-2.6.orig/arch/arm/mach-omap1/pm.c
+++ linux-2.6/arch/arm/mach-omap1/pm.c
@@ -584,8 +584,7 @@ static void omap_pm_init_proc(void)
static int omap_pm_prepare(void)
{
/* We cannot sleep in idle until we have resumed */
- disable_hlt();
-
+ cpu_idle_poll_ctrl(true);
return 0;
}
@@ -621,7 +620,7 @@ static int omap_pm_enter(suspend_state_t
static void omap_pm_finish(void)
{
- enable_hlt();
+ cpu_idle_poll_ctrl(false);
}
Index: linux-2.6/arch/arm/mach-omap2/omap_hwmod.c
===================================================================
--- linux-2.6.orig/arch/arm/mach-omap2/omap_hwmod.c
+++ linux-2.6/arch/arm/mach-omap2/omap_hwmod.c
@@ -2154,7 +2154,7 @@ static int _enable(struct omap_hwmod *oh
if (soc_ops.enable_module)
soc_ops.enable_module(oh);
if (oh->flags & HWMOD_BLOCK_WFI)
- disable_hlt();
+ cpu_idle_poll_ctrl(true);
if (soc_ops.update_context_lost)
soc_ops.update_context_lost(oh);
@@ -2218,7 +2218,7 @@ static int _idle(struct omap_hwmod *oh)
_del_initiator_dep(oh, mpu_oh);
if (oh->flags & HWMOD_BLOCK_WFI)
- enable_hlt();
+ cpu_idle_poll_ctrl(false);
if (soc_ops.disable_module)
soc_ops.disable_module(oh);
@@ -2328,7 +2328,7 @@ static int _shutdown(struct omap_hwmod *
_del_initiator_dep(oh, mpu_oh);
/* XXX what about the other system initiators here? dma, dsp */
if (oh->flags & HWMOD_BLOCK_WFI)
- enable_hlt();
+ cpu_idle_poll_ctrl(false);
if (soc_ops.disable_module)
soc_ops.disable_module(oh);
_disable_clocks(oh);
Index: linux-2.6/arch/arm/mach-omap2/pm.c
===================================================================
--- linux-2.6.orig/arch/arm/mach-omap2/pm.c
+++ linux-2.6/arch/arm/mach-omap2/pm.c
@@ -218,7 +218,7 @@ static int omap_pm_enter(suspend_state_t
static int omap_pm_begin(suspend_state_t state)
{
- disable_hlt();
+ cpu_idle_poll_ctrl(true);
if (cpu_is_omap34xx())
omap_prcm_irq_prepare();
return 0;
@@ -226,8 +226,7 @@ static int omap_pm_begin(suspend_state_t
static void omap_pm_end(void)
{
- enable_hlt();
- return;
+ cpu_idle_poll_ctrl(false);
}
static void omap_pm_finish(void)
Index: linux-2.6/arch/arm/mach-orion5x/board-dt.c
===================================================================
--- linux-2.6.orig/arch/arm/mach-orion5x/board-dt.c
+++ linux-2.6/arch/arm/mach-orion5x/board-dt.c
@@ -52,7 +52,7 @@ static void __init orion5x_dt_init(void)
*/
if (dev == MV88F5281_DEV_ID && rev == MV88F5281_REV_D0) {
printk(KERN_INFO "Orion: Applying 5281 D0 WFI workaround.\n");
- disable_hlt();
+ cpu_idle_poll_ctrl(true);
}
if (of_machine_is_compatible("lacie,ethernet-disk-mini-v2"))
Index: linux-2.6/arch/arm/mach-orion5x/common.c
===================================================================
--- linux-2.6.orig/arch/arm/mach-orion5x/common.c
+++ linux-2.6/arch/arm/mach-orion5x/common.c
@@ -293,7 +293,7 @@ void __init orion5x_init(void)
*/
if (dev == MV88F5281_DEV_ID && rev == MV88F5281_REV_D0) {
printk(KERN_INFO "Orion: Applying 5281 D0 WFI workaround.\n");
- disable_hlt();
+ cpu_idle_poll_ctrl(true);
}
/*
Index: linux-2.6/arch/arm/mach-shark/core.c
===================================================================
--- linux-2.6.orig/arch/arm/mach-shark/core.c
+++ linux-2.6/arch/arm/mach-shark/core.c
@@ -130,7 +130,7 @@ static void __init shark_timer_init(void
static void shark_init_early(void)
{
- disable_hlt();
+ cpu_idle_poll_ctrl(true);
}
MACHINE_START(SHARK, "Shark")
Index: linux-2.6/arch/arm/mach-shmobile/suspend.c
===================================================================
--- linux-2.6.orig/arch/arm/mach-shmobile/suspend.c
+++ linux-2.6/arch/arm/mach-shmobile/suspend.c
@@ -23,13 +23,13 @@ static int shmobile_suspend_default_ente
static int shmobile_suspend_begin(suspend_state_t state)
{
- disable_hlt();
+ cpu_idle_poll_ctrl(true);
return 0;
}
static void shmobile_suspend_end(void)
{
- enable_hlt();
+ cpu_idle_poll_ctrl(false);
}
struct platform_suspend_ops shmobile_suspend_ops = {
Index: linux-2.6/arch/arm/mach-w90x900/dev.c
===================================================================
--- linux-2.6.orig/arch/arm/mach-w90x900/dev.c
+++ linux-2.6/arch/arm/mach-w90x900/dev.c
@@ -531,7 +531,7 @@ static struct platform_device *nuc900_pu
void __init nuc900_board_init(struct platform_device **device, int size)
{
- disable_hlt();
+ cpu_idle_poll_ctrl(true);
platform_add_devices(device, size);
platform_add_devices(nuc900_public_dev, ARRAY_SIZE(nuc900_public_dev));
spi_register_board_info(nuc900_spi_board_info,
--
To unsubscribe from this list: send the line "unsubscribe linux-arch" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
