Re: [RFC PATCH v14 00/10] Landlock LSM

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Mar 19, 2020 at 5:58 PM Mickaël Salaün <mic@xxxxxxxxxxx> wrote:
> On 19/03/2020 00:33, Jann Horn wrote:
> > On Wed, Mar 18, 2020 at 1:06 PM Mickaël Salaün <mic@xxxxxxxxxxx> wrote:
[...]
> >> As I understand your proposition, we need to build the required_bits
> >> when adding a rule or enforcing/merging a ruleset with a domain. The
> >> issue is that a rule only refers to a struct inode, not a struct path.
> >> For your proposition to work, we would need to walk through the file
> >> path when adding a rule to a ruleset, which means that we need to depend
> >> of the current view of the process (i.e. its mount namespace), and its
> >> Landlock domain.
> >
> > I don't see why that is necessary. Why would we have to walk the file
> > path when adding a rule?
> >
> >> If the required_bits field is set when the ruleset is
> >> merged with the domain, it is not possible anymore to walk through the
> >> corresponding initial file path, which makes the enforcement step too
> >> late to check for such consistency. The important point is that a
> >> ruleset/domain doesn't have a notion of file hierarchy, a ruleset is
> >> only a set of tagged inodes.
> >>
> >> I'm not sure I got your proposition right, though. When and how would
> >> you generate the required_bits?
> >
> > Using your terminology:
> > A domain is a collection of N layers, which are assigned indices 0..N-1.
> > For each possible access type, a domain has a bitmask containing N
> > bits that stores which layers control that access type. (Basically a
> > per-layer version of fs_access_mask.)
>
> OK, so there is a bit for each domain, which means that you get a limit
> of, let's say 64 layers? Knowing that each layer can be created by a
> standalone application, potentially nested in a bunch of layers, this
> seems artificially limiting.

Yes, that is a downside of my approach.

> > To validate an access, you start by ORing together the bitmasks for
> > the requested access types; that gives you the required_bits mask,
> > which lists all layers that want to control the access.
> > Then you set seen_policy_bits=0, then do the
> > check_access_path_continue() loop while keeping track of which layers
> > you've seen with "seen_policy_bits |= access->contributing_policies",
> > or something like that.
> > And in the end, you check that seen_policy_bits is a superset of
> > required_bits - something like `(~seen_policy_bits) & required_bits ==
> > 0`.
> >
> > AFAICS to create a new domain from a bunch of layers, you wouldn't
> > have to do any path walking.
>
> Right, I misunderstood your previous email.
>
> >
> >> Here is my updated proposition: add a layer level and a depth to each
> >> rule (once enforced/merged with a domain), and a top layer level for a
> >> domain. When enforcing a ruleset (i.e. merging a ruleset into the
> >> current domain), the layer level of a new rule would be the incremented
> >> top layer level.
> >> If there is no rule (from this domain) tied to the same
> >> inode, then the depth of the new rule is 1. However, if there is already
> >> a rule tied to the same inode and if this rule's layer level is the
> >> previous top layer level, then the depth and the layer level are both
> >> incremented and the rule is updated with the new access rights (boolean
> >> AND).
> >>
> >> The policy looks like this:
> >> domain top_layer=2
> >> /a RW policy_bitmask=0x00000003 layer=1 depth=1
> >> /a/b R policy_bitmask=0x00000002 layer=2 depth=1
> >>
> >> The path walk access check walks through all inodes and start with a
> >> layer counter equal to the top layer of the current domain. For each
> >> encountered inode tied to a rule, the access rights are checked and a
> >> new check ensures that the layer of the matching rule is the same as the
> >> counter (this may be a merged ruleset containing rules pertaining to the
> >> same hierarchy, which is fine) or equal to the decremented counter (i.e.
> >> the path walk just reached the underlying layer). If the path walk
> >> encounter a rule with a layer strictly less than the counter minus one,
> >> there is a whole in the layers which means that the ruleset
> >> hierarchy/subset does not match, and the access must be denied.
> >>
> >> When accessing a file at /private/b/foo for a read access:
> >> /private/b/foo <no rules>
> >>   allowed_access=unknown layer_counter=2
> >> /private/b <access: R, policy_bitmask=0x00000002, layer=2, depth=1>
> >>   allowed_access=allowed layer_counter=2
> >> /private <no rules>
> >>   allowed_access=allowed layer_counter=2
> >> / <no rules>
> >>   allowed_access=allowed layer_counter=2
> >>
> >> Because the layer_counter didn't reach 1, the access request is then denied.
> >>
> >> This proposition enables not to rely on a parent ruleset at first, only
> >> when enforcing/merging a ruleset with a domain. This also solves the
> >> issue with multiple inherited/nested rules on the same inode (in which
> >> case the depth just grows). Moreover, this enables to safely stop the
> >> path walk as soon as we reach the layer 1.
> >
> > (FWIW, you could do the same optimization with the seen_policy_bits approach.)
> >
> > I guess the difference between your proposal and mine is that in my
> > proposal, the following would work, in effect permitting W access to
> > /foo/bar/baz (and nothing else)?
> >
> > first ruleset:
> >   /foo W
> > second ruleset:
> >   /foo/bar/baz W
> > third ruleset:
> >   /foo/bar W
> >
> > whereas in your proposal, IIUC it wouldn't be valid for a new ruleset
> > to whitelist a superset of what was whitelisted in a previous ruleset?
> >
>
> This behavior seems dangerous because a process which sandbox itself to
> only access /foo/bar W can bypass the restrictions from one of its
> parent domains (i.e. only access /foo/bar/baz W). Indeed, each layer is
> (most of the time) a different and standalone security policy.

It isn't actually bypassing the restriction: You still can't actually
access files like /foo/bar/blah, because a path walk from there
doesn't encounter any rules from the second ruleset.

> To sum up, the bitmask approach doesn't have the notion of layers
> ordering. It is then not possible to check that a rule comes from a
> domain which is the direct ancestor of a child's domain. I want each
> policy/layer to be really nested in the sense that a process sandboxing
> itself can only add more restriction to itself with regard to its parent
> domain (and the whole hierarchy). This is a similar approach to
> seccomp-bpf (with chained filters), except there is almost no overhead
> to nest several policies/layers together because they are flattened.
> Using the layer level and depth approach enables to implement this.




[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux