Re: [PATCH v4 16/24] fpga: dfl: add fpga manager platform driver for FME

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Mar 21, 2018 at 10:50:01AM +0800, Wu Hao wrote:
> On Tue, Mar 20, 2018 at 03:32:34PM -0500, Alan Tull wrote:
> > On Tue, Feb 13, 2018 at 3:24 AM, Wu Hao <hao.wu@xxxxxxxxx> wrote:
> > 
> > Hi Hao,
> > 
> > Elsewhere we discussed moving #defines used only in this driver either
> > to this .c file or to a similarly named .h file.  A couple minor
> > things below.
> 
> Hi Alan,
> 
> Yes, I will move those #defines into a similarly named .h file.
> 
> > 
> > > This patch adds fpga manager driver for FPGA Management Engine (FME). It
> > > implements fpga_manager_ops for FPGA Partial Reconfiguration function.
> > >
> > > Signed-off-by: Tim Whisonant <tim.whisonant@xxxxxxxxx>
> > > Signed-off-by: Enno Luebbers <enno.luebbers@xxxxxxxxx>
> > > Signed-off-by: Shiva Rao <shiva.rao@xxxxxxxxx>
> > > Signed-off-by: Christopher Rauer <christopher.rauer@xxxxxxxxx>
> > > Signed-off-by: Kang Luwei <luwei.kang@xxxxxxxxx>
> > > Signed-off-by: Xiao Guangrong <guangrong.xiao@xxxxxxxxxxxxxxx>
> > > Signed-off-by: Wu Hao <hao.wu@xxxxxxxxx>
> > > ---
> > > v3: rename driver to dfl-fpga-fme-mgr
> > >     implemented status callback for fpga manager
> > >     rebased due to fpga api changes
> > > v4: rename to dfl-fme-mgr, and fix SPDX license issue
> > >     add pr_credit comments and improve dev_err message
> > >     remove interface_id sysfs interface
> > >     include dfl-fme-pr.h instead of dfl.h
> > > ---
> > >  drivers/fpga/Kconfig       |   6 +
> > >  drivers/fpga/Makefile      |   1 +
> > >  drivers/fpga/dfl-fme-mgr.c | 290 +++++++++++++++++++++++++++++++++++++++++++++
> > >  3 files changed, 297 insertions(+)
> > >  create mode 100644 drivers/fpga/dfl-fme-mgr.c
> > >
> > > diff --git a/drivers/fpga/Kconfig b/drivers/fpga/Kconfig
> > > index 103d5e2..89f76e8 100644
> > > --- a/drivers/fpga/Kconfig
> > > +++ b/drivers/fpga/Kconfig
> > > @@ -150,6 +150,12 @@ config FPGA_DFL_FME
> > >           FPGA platform level management features. There shall be 1 FME
> > >           per DFL based FPGA device.
> > >
> > > +config FPGA_DFL_FME_MGR
> > > +       tristate "FPGA DFL FME Manager Driver"
> > > +       depends on FPGA_DFL_FME
> > > +       help
> > > +         Say Y to enable FPGA Manager driver for FPGA Management Engine.
> > > +
> > >  config FPGA_DFL_PCI
> > >         tristate "FPGA Device Feature List (DFL) PCIe Device Driver"
> > >         depends on PCI && FPGA_DFL
> > > diff --git a/drivers/fpga/Makefile b/drivers/fpga/Makefile
> > > index 3c44fc9..f82814a 100644
> > > --- a/drivers/fpga/Makefile
> > > +++ b/drivers/fpga/Makefile
> > > @@ -31,6 +31,7 @@ obj-$(CONFIG_OF_FPGA_REGION)          += of-fpga-region.o
> > >  # FPGA Device Feature List Support
> > >  obj-$(CONFIG_FPGA_DFL)                 += dfl.o
> > >  obj-$(CONFIG_FPGA_DFL_FME)             += dfl-fme.o
> > > +obj-$(CONFIG_FPGA_DFL_FME_MGR)         += dfl-fme-mgr.o
> > >
> > >  dfl-fme-objs := dfl-fme-main.o dfl-fme-pr.o
> > >
> > > diff --git a/drivers/fpga/dfl-fme-mgr.c b/drivers/fpga/dfl-fme-mgr.c
> > > new file mode 100644
> > > index 0000000..2f92c29
> > > --- /dev/null
> > > +++ b/drivers/fpga/dfl-fme-mgr.c
> > > @@ -0,0 +1,290 @@
> > > +// SPDX-License-Identifier: GPL-2.0
> > > +/*
> > > + * FPGA Manager Driver for FPGA Management Engine (FME)
> > > + *
> > > + * Copyright (C) 2017 Intel Corporation, Inc.
> > > + *
> > > + * Authors:
> > > + *   Kang Luwei <luwei.kang@xxxxxxxxx>
> > > + *   Xiao Guangrong <guangrong.xiao@xxxxxxxxxxxxxxx>
> > > + *   Wu Hao <hao.wu@xxxxxxxxx>
> > > + *   Joseph Grecco <joe.grecco@xxxxxxxxx>
> > > + *   Enno Luebbers <enno.luebbers@xxxxxxxxx>
> > > + *   Tim Whisonant <tim.whisonant@xxxxxxxxx>
> > > + *   Ananda Ravuri <ananda.ravuri@xxxxxxxxx>
> > > + *   Christopher Rauer <christopher.rauer@xxxxxxxxx>
> > > + *   Henry Mitchel <henry.mitchel@xxxxxxxxx>
> > > + */
> > > +
> > > +#include <linux/bitfield.h>
> > > +#include <linux/module.h>
> > > +#include <linux/iopoll.h>
> > > +#include <linux/fpga/fpga-mgr.h>
> > > +
> > > +#include "dfl-fme-pr.h"
> > > +
> > > +#define PR_WAIT_TIMEOUT   8000000
> > > +#define PR_HOST_STATUS_IDLE    0
> > > +
> > > +struct fme_mgr_priv {
> > > +       void __iomem *ioaddr;
> > > +       u64 pr_error;
> > > +};
> > > +
> > > +static u64 pr_error_to_mgr_status(u64 err)
> > > +{
> > > +       u64 status = 0;
> > > +
> > > +       if (err & FME_PR_ERR_OPERATION_ERR)
> > > +               status |= FPGA_MGR_STATUS_OPERATION_ERR;
> > > +       if (err & FME_PR_ERR_CRC_ERR)
> > > +               status |= FPGA_MGR_STATUS_CRC_ERR;
> > > +       if (err & FME_PR_ERR_INCOMPATIBLE_BS)
> > > +               status |= FPGA_MGR_STATUS_INCOMPATIBLE_IMAGE_ERR;
> > > +       if (err & FME_PR_ERR_PROTOCOL_ERR)
> > > +               status |= FPGA_MGR_STATUS_IP_PROTOCOL_ERR;
> > > +       if (err & FME_PR_ERR_FIFO_OVERFLOW)
> > > +               status |= FPGA_MGR_STATUS_FIFO_OVERFLOW_ERR;
> > > +
> > > +       return status;
> > > +}
> > > +
> > > +static u64 fme_mgr_pr_error_handle(void __iomem *fme_pr)
> > > +{
> > > +       u64 pr_status, pr_error;
> > > +
> > > +       pr_status = readq(fme_pr + FME_PR_STS);
> > > +       if (!(pr_status & FME_PR_STS_PR_STS))
> > > +               return 0;
> > > +
> > > +       pr_error = readq(fme_pr + FME_PR_ERR);
> > > +       writeq(pr_error, fme_pr + FME_PR_ERR);
> > > +
> > > +       return pr_error;
> > > +}
> > > +
> > > +static int fme_mgr_write_init(struct fpga_manager *mgr,
> > > +                             struct fpga_image_info *info,
> > > +                             const char *buf, size_t count)
> > > +{
> > > +       struct device *dev = &mgr->dev;
> > > +       struct fme_mgr_priv *priv = mgr->priv;
> > > +       void __iomem *fme_pr = priv->ioaddr;
> > > +       u64 pr_ctrl, pr_status;
> > > +
> > > +       if (!(info->flags & FPGA_MGR_PARTIAL_RECONFIG)) {
> > > +               dev_err(dev, "only supports partial reconfiguration.\n");
> > > +               return -EINVAL;
> > > +       }
> > > +
> > > +       dev_dbg(dev, "resetting PR before initiated PR\n");
> > > +
> > > +       pr_ctrl = readq(fme_pr + FME_PR_CTRL);
> > > +       pr_ctrl |= FME_PR_CTRL_PR_RST;
> > > +       writeq(pr_ctrl, fme_pr + FME_PR_CTRL);
> > > +
> > > +       if (readq_poll_timeout(fme_pr + FME_PR_CTRL, pr_ctrl,
> > > +                              pr_ctrl & FME_PR_CTRL_PR_RSTACK, 1,
> > > +                              PR_WAIT_TIMEOUT)) {
> > > +               dev_err(dev, "PR Reset ACK timeout\n");
> > > +               return -ETIMEDOUT;
> > > +       }
> > > +
> > > +       pr_ctrl = readq(fme_pr + FME_PR_CTRL);
> > > +       pr_ctrl &= ~FME_PR_CTRL_PR_RST;
> > > +       writeq(pr_ctrl, fme_pr + FME_PR_CTRL);
> > > +
> > > +       dev_dbg(dev,
> > > +               "waiting for PR resource in HW to be initialized and ready\n");
> > > +
> > > +       if (readq_poll_timeout(fme_pr + FME_PR_STS, pr_status,
> > > +                              (pr_status & FME_PR_STS_PR_STS) ==
> > > +                              FME_PR_STS_PR_STS_IDLE, 1, PR_WAIT_TIMEOUT)) {
> > > +               dev_err(dev, "PR Status timeout\n");
> > > +               priv->pr_error = fme_mgr_pr_error_handle(fme_pr);
> > > +               return -ETIMEDOUT;
> > > +       }
> > > +
> > > +       dev_dbg(dev, "check and clear previous PR error\n");
> > > +       priv->pr_error = fme_mgr_pr_error_handle(fme_pr);
> > > +       if (priv->pr_error)
> > > +               dev_dbg(dev, "previous PR error detected %llx\n",
> > > +                       (unsigned long long)priv->pr_error);
> > > +
> > > +       dev_dbg(dev, "set PR port ID\n");
> > > +
> > > +       pr_ctrl = readq(fme_pr + FME_PR_CTRL);
> > > +       pr_ctrl &= ~FME_PR_CTRL_PR_RGN_ID;
> > > +       pr_ctrl |= FIELD_PREP(FME_PR_CTRL_PR_RGN_ID, info->region_id);
> > > +       writeq(pr_ctrl, fme_pr + FME_PR_CTRL);
> > > +
> > > +       return 0;
> > > +}
> > > +
> > > +static int fme_mgr_write(struct fpga_manager *mgr,
> > > +                        const char *buf, size_t count)
> > > +{
> > > +       struct device *dev = &mgr->dev;
> > > +       struct fme_mgr_priv *priv = mgr->priv;
> > > +       void __iomem *fme_pr = priv->ioaddr;
> > > +       u64 pr_ctrl, pr_status, pr_data;
> > > +       int delay = 0, pr_credit, i = 0;
> > > +
> > > +       dev_dbg(dev, "start request\n");
> > > +
> > > +       pr_ctrl = readq(fme_pr + FME_PR_CTRL);
> > > +       pr_ctrl |= FME_PR_CTRL_PR_START;
> > > +       writeq(pr_ctrl, fme_pr + FME_PR_CTRL);
> > > +
> > > +       dev_dbg(dev, "pushing data from bitstream to HW\n");
> > > +
> > > +       /*
> > > +        * driver can push data to PR hardware using PR_DATA register once HW
> > > +        * has enough pr_credit (> 1), pr_credit reduces one for every 32bit
> > > +        * pr data write to PR_DATA register. If pr_credit <= 1, driver needs
> > > +        * to wait for enough pr_credit from hardware by polling.
> > > +        */
> > > +       pr_status = readq(fme_pr + FME_PR_STS);
> > > +       pr_credit = FIELD_GET(FME_PR_STS_PR_CREDIT, pr_status);
> > > +
> > > +       while (count > 0) {
> > > +               while (pr_credit <= 1) {
> > > +                       if (delay++ > PR_WAIT_TIMEOUT) {
> > > +                               dev_err(dev, "PR_CREDIT timeout\n");
> > > +                               return -ETIMEDOUT;
> > > +                       }
> > > +                       udelay(1);
> > > +
> > > +                       pr_status = readq(fme_pr + FME_PR_STS);
> > > +                       pr_credit = FIELD_GET(FME_PR_STS_PR_CREDIT, pr_status);
> > > +               }
> > > +
> > > +               if (count >= 4) {
> > > +                       pr_data = 0;
> > > +                       pr_data |= FIELD_PREP(FME_PR_DATA_PR_DATA_RAW,
> > > +                                             *(((u32 *)buf) + i));
> > > +                       writeq(pr_data, fme_pr + FME_PR_DATA);
> > > +                       count -= 4;
> > > +                       pr_credit--;
> > > +                       i++;
> > > +               } else {
> > > +                       WARN_ON(1);
> > > +                       return -EINVAL;
> > > +               }
> > > +       }
> > > +
> > > +       return 0;
> > > +}
> > > +
> > > +static int fme_mgr_write_complete(struct fpga_manager *mgr,
> > > +                                 struct fpga_image_info *info)
> > > +{
> > > +       struct device *dev = &mgr->dev;
> > > +       struct fme_mgr_priv *priv = mgr->priv;
> > > +       void __iomem *fme_pr = priv->ioaddr;
> > > +       u64 pr_ctrl;
> > > +
> > > +       pr_ctrl = readq(fme_pr + FME_PR_CTRL);
> > > +       pr_ctrl |= FME_PR_CTRL_PR_COMPLETE;
> > > +       writeq(pr_ctrl, fme_pr + FME_PR_CTRL);
> > > +
> > > +       dev_dbg(dev, "green bitstream push complete\n");
> > > +       dev_dbg(dev, "waiting for HW to release PR resource\n");
> > > +
> > > +       if (readq_poll_timeout(fme_pr + FME_PR_CTRL, pr_ctrl,
> > > +                              !(pr_ctrl & FME_PR_CTRL_PR_START), 1,
> > > +                              PR_WAIT_TIMEOUT)) {
> > > +               dev_err(dev, "PR Completion ACK timeout.\n");
> > > +               return -ETIMEDOUT;
> > > +       }
> > > +
> > > +       dev_dbg(dev, "PR operation complete, checking status\n");
> > > +       priv->pr_error = fme_mgr_pr_error_handle(fme_pr);
> > > +       if (priv->pr_error) {
> > > +               dev_dbg(dev, "PR error detected %llx\n",
> > > +                       (unsigned long long)priv->pr_error);
> > > +               return -EIO;
> > > +       }
> > > +
> > > +       dev_dbg(dev, "PR done successfully\n");
> > > +
> > > +       return 0;
> > > +}
> > > +
> > > +static enum fpga_mgr_states fme_mgr_state(struct fpga_manager *mgr)
> > > +{
> > > +       return FPGA_MGR_STATE_UNKNOWN;
> > > +}
> > > +
> > > +static u64 fme_mgr_status(struct fpga_manager *mgr)
> > > +{
> > > +       struct fme_mgr_priv *priv = mgr->priv;
> > > +
> > > +       return pr_error_to_mgr_status(priv->pr_error);
> > > +}
> > > +
> > > +static const struct fpga_manager_ops fme_mgr_ops = {
> > > +       .write_init = fme_mgr_write_init,
> > > +       .write = fme_mgr_write,
> > > +       .write_complete = fme_mgr_write_complete,
> > > +       .state = fme_mgr_state,
> > > +       .status = fme_mgr_status,
> > > +};
> > > +
> > > +static int fme_mgr_probe(struct platform_device *pdev)
> > > +{
> > > +       struct device *dev = &pdev->dev;
> > > +       struct fme_mgr_priv *priv;
> > > +       struct fpga_manager *mgr;
> > > +       struct resource *res;
> > > +       int ret;
> > > +
> > > +       priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
> > > +       if (!priv)
> > > +               return -ENOMEM;
> > > +
> > > +       res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> > > +       priv->ioaddr = devm_ioremap(dev, res->start, resource_size(res));
> > 
> > How about using devm_ioremap_resourc(dev, res) here instead?
> 
> Actually the register region has already been mapped in lower level driver
> (e.g pci) so I think we don't have to map the second time here. I plan to
> add some code to pass the ioaddr via the platform data, and check if valid
> ioaddr from the platform data firstly in this probe function. If no pdata
> or no valid ioaddr, then go with devm_ioremap_resource. :)

If you end up sharing register spaces between drivers is regmap / syscon
maybe a good idea?
> 
> > 
> > > +       if (IS_ERR(priv->ioaddr))
> > > +               return PTR_ERR(priv->ioaddr);
> > > +
> > > +       mgr = devm_kzalloc(dev, sizeof(*mgr), GFP_KERNEL);
> > > +       if (!mgr)
> > > +               return -ENOMEM;
> > > +
> > > +       mgr->name = "DFL FPGA Manager";
> > > +       mgr->mops = &fme_mgr_ops;
> > > +       mgr->priv = priv;
> > > +       mgr->parent = dev;
> > > +       platform_set_drvdata(pdev, mgr);
> > > +
> > > +       ret = fpga_mgr_register(mgr);
> > > +       if (ret)
> > > +               dev_err(dev, "unable to register FPGA manager\n");
> > > +
> > > +       return ret;
> > 
> > You can probably just do "return fpga_mgr_register(mgr);" here.
> 
> Yes, it looks better, I will fix it. Thanks a lot for the review.
> 
> Hao
> 
> > 
> > Thanks,
> > Alan
> > 
> > > +}
> > > +
> > > +static int fme_mgr_remove(struct platform_device *pdev)
> > > +{
> > > +       struct fpga_manager *mgr = platform_get_drvdata(pdev);
> > > +
> > > +       fpga_mgr_unregister(mgr);
> > > +
> > > +       return 0;
> > > +}
> > > +
> > > +static struct platform_driver fme_mgr_driver = {
> > > +       .driver = {
> > > +               .name    = FPGA_DFL_FME_MGR,
> > > +       },
> > > +       .probe   = fme_mgr_probe,
> > > +       .remove  = fme_mgr_remove,
> > > +};
> > > +
> > > +module_platform_driver(fme_mgr_driver);
> > > +
> > > +MODULE_DESCRIPTION("FPGA Manager for DFL FPGA Management Engine");
> > > +MODULE_AUTHOR("Intel Corporation");
> > > +MODULE_LICENSE("GPL v2");
> > > +MODULE_ALIAS("platform:dfl-fme-mgr");
> > > --
> > > 2.7.4
> > >

Cheers,
Moritz
--
To unsubscribe from this list: send the line "unsubscribe linux-api" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux