Re: [PATCH RFC] Introduce new security.nscapability xattr

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Jan 27, 2016 at 10:08:15AM -0600, Serge E. Hallyn wrote:
> On Wed, Jan 20, 2016 at 01:48:16PM +0100, Jann Horn wrote:
> > On Fri, Dec 04, 2015 at 02:21:16PM -0600, Serge E. Hallyn wrote:
> > > Quoting Eric W. Biederman (ebiederm@xxxxxxxxxxxx):
> > > > "Serge E. Hallyn" <serge.hallyn@xxxxxxxxxx> writes:
> > > > 
> > > > > A common way for daemons to run with minimal privilege is to start as root,
> > > > > perhaps setuid-root, choose a desired capability set, set PR_SET_KEEPCAPS,
> > > > > then change uid to non-root.  A simpler way to achieve this is to set file
> > > > > capabilities on a not-setuid-root binary.  However, when installing a package
> > > > > inside a (user-namespaced) container, packages cannot be installed with file
> > > > > capabilities.  For this reason, containers must install ping setuid-root.
> > > > 
> > > > Don't ping sockets avoid that specific problem?
> > > > 
> > > > I expect the general case still holds.
> > > > 
> > > > > To achieve this, we would need for containers to be able to request file
> > > > > capabilities be added to a file without causing these to be honored in the
> > > > > initial user namespace.
> > > > >
> > > > > To this end, the patch below introduces a new capability xattr format.  The
> > > > > main enhancement over the existing security.capability xattr is that we
> > > > > tag capability sets with a uid - the uid of the root user in the namespace
> > > > > where the capabilities are set.  The capabilities will be ignored in any
> > > > > other namespace.  The special case of uid == -1 (which must only ever be
> > > > > able to be set by kuid 0) means use the capabilities in all
> > > > > namespaces.
> > > 
> > > really since security.capability xattrs are currently honored in all
> > > namespaces this isn't really necessary.  Until and unless Seth's set
> > > changes that.
> > > 
> > > > 
> > > > A quick comment on this.
> > > > 
> > > > We currently allow capabilities that have been gained to be valid in all
> > > > descendent user namespaces.
> > > > 
> > > > Applying this principle to the on-disk capabilities would make it so
> > > > that uid 0 would mean capabilities in all namespaces.
> > > > 
> > > > It might be worth it to introduce a fixed sized array with a length
> > > > parameter of perhaps 32 entries which is a path of root uids as seen by
> > > > the initial user namespace.  That way the entire construction of the
> > > > user namespace could be verified.  AKA verify the current user namespace
> > > > and the parent and the parents parent.  Up to the user namespace the
> > > > current filesystem is mounted in. We would look at how much space
> > > > allows an xattr to be stored without causing filesystems a challenge
> > > > to properly size such an array.
> > > > 
> > > > Given that uids are fundamentally flat that might not be particularly
> > > > useful.  If we add an alternative way of identifying user namespaces
> > > > say a privileged operation that set a uuid, then the complete path would
> > > > be more interesting.
> > > > 
> > > > > An alternative format would use a pair of uids to indicate a range of rootids.
> > > > > This would allow root in a user namespace with uids 100000-165536 mapped to
> > > > > set the xattr once on a file, then launch nested containers wherein the file
> > > > > could be used with privilege.  That's not what this patch does, but would be
> > > > > a trivial change if people think it would be worthwhile.
> > > > >
> > > > > This patch does not actually address the real problem, which is setting the
> > > > > xattrs from inside containers.  For that, I think the best solution is to
> > > > > add a pair of new system calls, setfcap and getfcap. Userspace would for
> > > > > instance call fsetfcap(fd, cap_user_header_t, cap_user_data_t), to which
> > > > > the kernel would, if not in init_user_ns, react by writing an appropriate
> > > > > security.nscapability xattr.
> > > > 
> > > > That feels hard to maintain, but you may be correct that we have a small
> > > > enough userspace that it would not be a problem.
> > > > 
> > > > Eric
> > > > 
> > > > 
> > > > > The libcap2 library's cap_set_file/cap_get_file could be switched over
> > > > > transparently to use this to hide its use from all callers.
> > > > >
> > > > > Comments appreciated.
> > > > >
> > > > > Note - In this patch, file capabilities only work for containers which have
> > > > > a root uid defined.  We may want to allow -1 uids to work in all
> > > > > namespaces.  There certainly would be uses for this, but I'm a bit unsettled
> > > > > about the implications of allowing a program privilege in a container where
> > > > > there is no uid with privilege.  This needs more thought.
> > > 
> > > So for actually enabling (user-namespaced) containers to use these, there
> > > are a few possibilities that come to mine.
> > > 
> > > 1. A new setfcap (/getfcap) syscall.  Uses mapped uid 0 from
> > > current_user_ns() to write a value in the security.nscapability xattr.
> > > Userspace doesn't need to worry at all about namespace issues.
> > 
> > Your patch has an "ncaps" field and supports giving (possibly different)
> > privileges to different namespace root users.
> > I think that with a setfcap() syscall as you describe, it would be hard
> > to add more than one security.nscapability entry to a file without
> > poking holes into stuff:
> > 
> > If setfcap() requires inode write access, every namespace root for whom
> > a security.nscapability entry can be added can overwrite the file, so
> > namespace roots might be able to execute code as each other.
> > 
> > If setfcap() doesn't require inode write access, that isn't a big
> > security issue, but it allows unprivileged users to waste disk space
> > in a writable-mounted filesystem on which they have no write access
> > anywhere. I'm not sure whether that is a sufficiently big problem for
> > anyone to care.
> > 
> > 
> > Another issue with this would be that it makes restoring sub-namespace
> > capabilities from a backup somewhat ugly, at least if you're not in the
> > init ns: You'd have to parse the capabilities attribute, then, for every
> > attribute you want to restore whose rootid doesn't refer to your
> > namespace, clone(CLONE_NEWUSER), map the target uid to 0 from the parent
> > process, seteuid(0), do the setfcap() and exit.
> > 
> > It would require less synchronization with my ptrace hardening patch
> > that checks whether uids are mapped (if that lands, I don't think it has
> > yet?) because that would allow you to first setuid, then clone(), map
> > the uid to 0 inside the namespace and setfcap(), but it'd still require
> > special-case code in backup software.
> > 
> > 
> > > 2. Just expect userspace to write a xattr;  kernel checks that no values
> > > are changed for any other namespaces.  This could be a lot of parsing and
> > > verifying in the kernel.
> > 
> > This option would allow the first problem I described with option 1 (if
> > it is a problem?) to be worked around by letting a helper in the outer
> > namespace add capabilities for lower namespaces - but it wouldn't be
> 
> Note that regardless, the fscaps would still be stored as an xattr.
> The setfcap/getfacp syscalls would be for convenience, but a suitably
> privileged task in the init_user_ns could just write the xattr.

Yes - I was thinking of a privileged task in an intermediate namespace,
which could then be allowed to backup and restore capability xattrs for
all mapped uids.
I'm not sure whether that's a realistic/common scenario. Maybe if someone
uses an LXC VPS inside which he uses LXC to further isolate various
services.


> You've made a good point here and in your prev email: when a namespaced
> file cap exists for say uid 1000, perhaps it should apply for every
> descendent ns of uid 1000.  In this case maybe it makes sense to drop
> the nscaps field and actually only allow one namespace fscap.  It must
> be set by the owner of the file (i.e., uid 1000, or uid 0 if a
> host-root-owned file) or someone privileged over it (i.e. uid 100000
> who is root in his ns and i_sb->s_user_ns->owner for the file).
> 
> So if the host has /bin/ping with cap_net_raw=ep, any user in any
> ns which can reach and xecute it can run the file with those privileges
> (in their own ns).  If uid 1000 creates a user_ns with root 100000,
> that container can create a $rootfs/bin/ping with cap_net_raw=ep
> with uid tag 100000.  If that container creates a sub-container owned
> by uid 150000, that container can also run $rootfs/bin/ping with
> cap_net_raw=ep, but uid 1001 on the host does not.  Now we don't have
> the risk of wasting disk space, and restoring a cap-endowed file in
> a sub-userns is trivial.
> 
> In this case we can probably also do away with the setfcap() syscall,
> as userspace only needs to look for the "0 x y" /proc/self/uid_map
> entry and enter x in the xattr.

That won't work in a namespace >1 levels below the init ns though,
right? Because /proc/self/uid_map only shows the uids in the current
user ns and its parent, not the kuids.

$ id
uid=1000[...]
$ unshare -Ur unshare -Ur cat /proc/self/uid_map
         0          0          1

This could of course be worked around by adding a "map this uid up
to a kuid" ioctl for user namespaces to ns_file_operations or so,
but I'm not sure how I feel about that.

Can we let the kernel map the uid in the file attribute up/down
on attribute access? If it's just one binary 32-bit field at the
start of the attribute value, the code should be fairly
straightforward.

> Does this seem reasonable and somewhat risk-averse?

I think it sounds good from a security perspective.

Attachment: signature.asc
Description: Digital signature


[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux