Re: [PATCH v3 18/22] IB/fmr_pool: Convert the cleanup thread into kthread worker API

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Nov 18, 2015 at 02:25:23PM +0100, Petr Mladek wrote:
> Kthreads are currently implemented as an infinite loop. Each
> has its own variant of checks for terminating, freezing,
> awakening. In many cases it is unclear to say in which state
> it is and sometimes it is done a wrong way.
> 
> The plan is to convert kthreads into kthread_worker or workqueues
> API. It allows to split the functionality into separate operations.
> It helps to make a better structure. Also it defines a clean state
> where no locks are taken, IRQs blocked, the kthread might sleep
> or even be safely migrated.
> 
> The kthread worker API is useful when we want to have a dedicated
> single thread for the work. It helps to make sure that it is
> available when needed. Also it allows a better control, e.g.
> define a scheduling priority.
> 
> This patch converts the frm_pool kthread into the kthread worker
s/frm/fmr
> API because I am not sure how busy the thread is. It is well
> possible that it does not need a dedicated kthread and workqueues
> would be perfectly fine. Well, the conversion between kthread
> worker API and workqueues is pretty trivial.
> 
> The patch moves one iteration from the kthread into the work function.
> It preserves the check for a spurious queuing (wake up). Then it
> processes one request. Finally, it re-queues itself if more requests
> are pending.
> 
> Otherwise, wake_up_process() is replaced by queuing the work.
> 
> Important: The change is only compile tested. I did not find an easy
> way how to check it in a real life.
What are the expectations?
> 
> Signed-off-by: Petr Mladek <pmladek@xxxxxxxx>
> CC: Doug Ledford <dledford@xxxxxxxxxx>
> CC: Sean Hefty <sean.hefty@xxxxxxxxx>
> CC: Hal Rosenstock <hal.rosenstock@xxxxxxxxx>
> CC: linux-rdma@xxxxxxxxxxxxxxx
> ---
>  drivers/infiniband/core/fmr_pool.c | 54 ++++++++++++++++++--------------------
>  1 file changed, 25 insertions(+), 29 deletions(-)
> 
> diff --git a/drivers/infiniband/core/fmr_pool.c b/drivers/infiniband/core/fmr_pool.c
> index 9f5ad7cc33c8..5f2b06bd14da 100644
> --- a/drivers/infiniband/core/fmr_pool.c
> +++ b/drivers/infiniband/core/fmr_pool.c
> @@ -96,7 +96,8 @@ struct ib_fmr_pool {
>  						   void *              arg);
>  	void                     *flush_arg;
>  
> -	struct task_struct       *thread;
> +	struct kthread_worker	  *worker;
> +	struct kthread_work	  work;
>  
>  	atomic_t                  req_ser;
>  	atomic_t                  flush_ser;
> @@ -174,29 +175,26 @@ static void ib_fmr_batch_release(struct ib_fmr_pool *pool)
>  	spin_unlock_irq(&pool->pool_lock);
>  }
>  
> -static int ib_fmr_cleanup_thread(void *pool_ptr)
> +static void ib_fmr_cleanup_func(struct kthread_work *work)
>  {
> -	struct ib_fmr_pool *pool = pool_ptr;
> +	struct ib_fmr_pool *pool = container_of(work, struct ib_fmr_pool, work);
>  
> -	do {
> -		if (atomic_read(&pool->flush_ser) - atomic_read(&pool->req_ser) < 0) {
> -			ib_fmr_batch_release(pool);
> -
> -			atomic_inc(&pool->flush_ser);
> -			wake_up_interruptible(&pool->force_wait);
> +	/*
> +	 * The same request might be queued twice when it appears and
> +	 * by re-queuing from this work.
> +	 */
> +	if (atomic_read(&pool->flush_ser) - atomic_read(&pool->req_ser) >= 0)
> +		return;
>  
> -			if (pool->flush_function)
> -				pool->flush_function(pool, pool->flush_arg);
> -		}
> +	ib_fmr_batch_release(pool);
> +	atomic_inc(&pool->flush_ser);
> +	wake_up_interruptible(&pool->force_wait);
>  
> -		set_current_state(TASK_INTERRUPTIBLE);
> -		if (atomic_read(&pool->flush_ser) - atomic_read(&pool->req_ser) >= 0 &&
> -		    !kthread_should_stop())
> -			schedule();
> -		__set_current_state(TASK_RUNNING);
> -	} while (!kthread_should_stop());
> +	if (pool->flush_function)
> +		pool->flush_function(pool, pool->flush_arg);
>  
> -	return 0;
> +	if (atomic_read(&pool->flush_ser) - atomic_read(&pool->req_ser) < 0)
> +		queue_kthread_work(pool->worker, &pool->work);
>  }
>  
>  /**
> @@ -286,15 +284,13 @@ struct ib_fmr_pool *ib_create_fmr_pool(struct ib_pd             *pd,
>  	atomic_set(&pool->flush_ser, 0);
>  	init_waitqueue_head(&pool->force_wait);
>  
> -	pool->thread = kthread_run(ib_fmr_cleanup_thread,
> -				   pool,
> -				   "ib_fmr(%s)",
> -				   device->name);
> -	if (IS_ERR(pool->thread)) {
> -		printk(KERN_WARNING PFX "couldn't start cleanup thread\n");
> -		ret = PTR_ERR(pool->thread);
> +	pool->worker = create_kthread_worker(0, "ib_fmr(%s)", device->name);
Is this patch depends on some other patch?
> +	if (IS_ERR(pool->worker)) {
> +		pr_warn(PFX "couldn't start cleanup kthread worker\n");
> +		ret = PTR_ERR(pool->worker);
>  		goto out_free_pool;
>  	}
> +	init_kthread_work(&pool->work, ib_fmr_cleanup_func);
>  
>  	{
>  		struct ib_pool_fmr *fmr;
> @@ -362,7 +358,7 @@ void ib_destroy_fmr_pool(struct ib_fmr_pool *pool)
>  	LIST_HEAD(fmr_list);
>  	int                 i;
>  
> -	kthread_stop(pool->thread);
> +	destroy_kthread_worker(pool->worker);
>  	ib_fmr_batch_release(pool);
>  
>  	i = 0;
> @@ -412,7 +408,7 @@ int ib_flush_fmr_pool(struct ib_fmr_pool *pool)
>  	spin_unlock_irq(&pool->pool_lock);
>  
>  	serial = atomic_inc_return(&pool->req_ser);
> -	wake_up_process(pool->thread);
> +	queue_kthread_work(pool->worker, &pool->work);
>  
>  	if (wait_event_interruptible(pool->force_wait,
>  				     atomic_read(&pool->flush_ser) - serial >= 0))
> @@ -526,7 +522,7 @@ int ib_fmr_pool_unmap(struct ib_pool_fmr *fmr)
>  			list_add_tail(&fmr->list, &pool->dirty_list);
>  			if (++pool->dirty_len >= pool->dirty_watermark) {
>  				atomic_inc(&pool->req_ser);
> -				wake_up_process(pool->thread);
> +				queue_kthread_work(pool->worker, &pool->work);
>  			}
>  		}
>  	}
> -- 
> 1.8.5.6
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-api" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux