Re: [PATCH v4] Input: Add userio module

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi

On Thu, Jul 23, 2015 at 7:33 PM, Stephen Chandler Paul <cpaul@xxxxxxxxxx> wrote:
> Debugging input devices, specifically laptop touchpads, can be tricky
> without having the physical device handy. Here we try to remedy that
> with userio. This module allows an application to connect to a character
> device provided by the kernel, and emulate any serio device. In
> combination with userspace programs that can record PS/2 devices and
> replay them through the /dev/userio device, this allows developers to
> debug driver issues on the PS/2 level with devices simply by requesting
> a recording from the user experiencing the issue without having to have
> the physical hardware in front of them.
>
> Signed-off-by: Stephen Chandler Paul <cpaul@xxxxxxxxxx>
> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxx>
>
> ---
>                                     Changes
> * Use one lock, not two
> * Don't use devm_kzalloc()
> * Add lock/unlock operations in userio_char_write()
> * Handle mutex locking and head/tail checking the same way we do in evdev, wait
>   until there's data available, attempt to grab the mutex but give up if the
>   data's been taken by another thread and try again until we get the data
> * Don't clear userio->serio->port_data, serio_port_unregister() does this for us
> * Put userio->head == userio->tail test inside mutex lock
> * Add comment making note of the fact that we don't have to free serio
>
>  Documentation/input/userio.txt |  70 +++++++++++
>  MAINTAINERS                    |   6 +
>  drivers/input/serio/Kconfig    |  11 ++
>  drivers/input/serio/Makefile   |   1 +
>  drivers/input/serio/userio.c   | 274 +++++++++++++++++++++++++++++++++++++++++
>  include/uapi/linux/userio.h    |  42 +++++++
>  6 files changed, 404 insertions(+)
>  create mode 100644 Documentation/input/userio.txt
>  create mode 100644 drivers/input/serio/userio.c
>  create mode 100644 include/uapi/linux/userio.h
>
> diff --git a/Documentation/input/userio.txt b/Documentation/input/userio.txt
> new file mode 100644
> index 0000000..0880c0f
> --- /dev/null
> +++ b/Documentation/input/userio.txt
> @@ -0,0 +1,70 @@
> +                             The userio Protocol
> +            (c) 2015 Stephen Chandler Paul <thatslyude@xxxxxxxxx>
> +                             Sponsored by Red Hat
> +--------------------------------------------------------------------------------
> +
> +1. Introduction
> +~~~~~~~~~~~~~~~
> +  This module is intended to try to make the lives of input driver developers
> +easier by allowing them to test various serio devices (mainly the various
> +touchpads found on laptops) without having to have the physical device in front
> +of them. userio accomplishes this by allowing any privileged userspace program
> +to directly interact with the kernel's serio driver and control a virtual serio
> +port from there.
> +
> +2. Usage overview
> +~~~~~~~~~~~~~~~~~
> +  In order to interact with the userio kernel module, one simply opens the
> +/dev/userio character device in their applications. Commands are sent to the
> +kernel module by writing to the device, and any data received from the serio
> +driver is read as-is from the /dev/userio device. All of the structures and
> +macros you need to interact with the device are defined in <linux/userio.h> and
> +<linux/serio.h>.
> +
> +3. Command Structure
> +~~~~~~~~~~~~~~~~~~~~
> +  The struct used for sending commands to /dev/userio is as follows:
> +
> +       struct userio_cmd {
> +               __u8 type;
> +               __u8 data;
> +       };
> +
> +  "type" describes the type of command that is being sent. This can be any one
> +of the USERIO_CMD macros defined in <linux/userio.h>. "data" is the argument
> +that goes along with the command. In the event that the command doesn't have an
> +argument, this field can be left untouched and will be ignored by the kernel.
> +Each command should be sent by writing the struct directly to the character
> +device. In the event that the command you send is invalid, an error will be
> +returned by the character device and a more descriptive error will be printed
> +to the kernel log. Only one command can be sent at a time, any additional data
> +written to the character device after the initial command will be ignored.
> +  To close the virtual serio port, just close /dev/userio.
> +
> +4. Commands
> +~~~~~~~~~~~
> +
> +4.1 USERIO_CMD_REGISTER
> +~~~~~~~~~~~~~~~~~~~~~~~
> +  Registers the port with the serio driver and begins transmitting data back and
> +forth. Registration can only be performed once a port type is set with
> +USERIO_CMD_SET_PORT_TYPE. Has no argument.
> +
> +4.2 USERIO_CMD_SET_PORT_TYPE
> +~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> +  Sets the type of port we're emulating, where "data" is the port type being
> +set. Can be any of the macros from <linux/serio.h>. For example: SERIO_8042
> +would set the port type to be a normal PS/2 port.
> +
> +4.3 USERIO_CMD_SEND_INTERRUPT
> +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> +  Sends an interrupt through the virtual serio port to the serio driver, where
> +"data" is the interrupt data being sent.
> +
> +5. Userspace tools
> +~~~~~~~~~~~~~~~~~~
> +  The userio userspace tools are able to record PS/2 devices using some of the
> +debugging information from i8042, and play back the devices on /dev/userio. The
> +latest version of these tools can be found at:
> +
> +       https://github.com/Lyude/ps2emu
> diff --git a/MAINTAINERS b/MAINTAINERS
> index a226416..68a0977 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -10877,6 +10877,12 @@ S:     Maintained
>  F:     drivers/media/v4l2-core/videobuf2-*
>  F:     include/media/videobuf2-*
>
> +VIRTUAL PS/2 DEVICE DRIVER

Forgot to update this? Should say SERIO, right?

> +M:     Stephen Chandler Paul <thatslyude@xxxxxxxxx>
> +S:     Maintained
> +F:     drivers/input/serio/ps2emu.c
> +F:     include/uapi/linux/ps2emu.h
> +
>  VIRTIO CONSOLE DRIVER
>  M:     Amit Shah <amit.shah@xxxxxxxxxx>
>  L:     virtualization@xxxxxxxxxxxxxxxxxxxxxxxxxx
> diff --git a/drivers/input/serio/Kconfig b/drivers/input/serio/Kconfig
> index 200841b..22b8b58 100644
> --- a/drivers/input/serio/Kconfig
> +++ b/drivers/input/serio/Kconfig
> @@ -292,4 +292,15 @@ config SERIO_SUN4I_PS2
>           To compile this driver as a module, choose M here: the
>           module will be called sun4i-ps2.
>
> +config USERIO
> +       tristate "Virtual serio device support"
> +       help
> +         Say Y here if you want to emulate serio devices using the userio
> +         kernel module.
> +
> +         To compile this driver as a module, choose M here: the module will be
> +         called userio.
> +
> +         If you are unsure, say N.
> +
>  endif
> diff --git a/drivers/input/serio/Makefile b/drivers/input/serio/Makefile
> index c600089..2374ef9 100644
> --- a/drivers/input/serio/Makefile
> +++ b/drivers/input/serio/Makefile
> @@ -30,3 +30,4 @@ obj-$(CONFIG_SERIO_APBPS2)    += apbps2.o
>  obj-$(CONFIG_SERIO_OLPC_APSP)  += olpc_apsp.o
>  obj-$(CONFIG_HYPERV_KEYBOARD)  += hyperv-keyboard.o
>  obj-$(CONFIG_SERIO_SUN4I_PS2)  += sun4i-ps2.o
> +obj-$(CONFIG_USERIO)           += userio.o
> diff --git a/drivers/input/serio/userio.c b/drivers/input/serio/userio.c
> new file mode 100644
> index 0000000..043fbbf
> --- /dev/null
> +++ b/drivers/input/serio/userio.c
> @@ -0,0 +1,274 @@
> +/*
> + * userio kernel serio device emulation module
> + * Copyright (C) 2015 Red Hat
> + * Copyright (C) 2015 Stephen Chandler Paul <thatslyude@xxxxxxxxx>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU Lesser General Public License as published by the
> + * Free Software Foundation; either version 2 of the License, or (at your
> + * option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
> + * FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more
> + * details.
> + */
> +#include <linux/circ_buf.h>
> +#include <linux/mutex.h>
> +#include <linux/module.h>
> +#include <linux/init.h>
> +#include <linux/kernel.h>
> +#include <linux/serio.h>
> +#include <linux/slab.h>
> +#include <linux/fs.h>
> +#include <linux/miscdevice.h>
> +#include <linux/sched.h>
> +#include <linux/poll.h>
> +#include <uapi/linux/userio.h>
> +
> +#define USERIO_NAME "userio"
> +#define USERIO_BUFSIZE 16
> +
> +static const struct file_operations userio_fops;

This forward declaration is not needed.

> +static struct miscdevice userio_misc;
> +
> +struct userio_device {
> +       struct serio *serio;
> +       struct mutex lock;
> +
> +       bool running;
> +
> +       u8 head;
> +       u8 tail;
> +
> +       unsigned char buf[USERIO_BUFSIZE];
> +
> +       wait_queue_head_t waitq;
> +};
> +
> +/**
> + * userio_device_write - Write data from serio to a userio device in userspace
> + * @id: The serio port for the userio device
> + * @val: The data to write to the device
> + */
> +static int userio_device_write(struct serio *id, unsigned char val)
> +{
> +       struct userio_device *userio = id->port_data;
> +
> +       if (!userio)
> +               return -1;

How can that happen? Can't you drop that condition?

> +
> +       mutex_lock(&userio->lock);
> +
> +       userio->buf[userio->head] = val;
> +       userio->head = (userio->head + 1) % USERIO_BUFSIZE;
> +
> +       if (userio->head == userio->tail)
> +               dev_warn(userio_misc.this_device,
> +                        "Buffer overflowed, userio client isn't keeping up");
> +
> +       mutex_unlock(&userio->lock);
> +
> +       wake_up_interruptible(&userio->waitq);
> +
> +       return 0;
> +}
> +
> +static int userio_char_open(struct inode *inode, struct file *file)
> +{
> +       struct userio_device *userio;
> +
> +       userio = kzalloc(sizeof(struct userio_device), GFP_KERNEL);
> +       if (!userio)
> +               return -ENOMEM;
> +
> +       mutex_init(&userio->lock);
> +       init_waitqueue_head(&userio->waitq);
> +
> +       userio->serio = kzalloc(sizeof(struct serio), GFP_KERNEL);
> +       if (!userio->serio) {
> +               kfree(userio);
> +               return -ENOMEM;
> +       }
> +
> +       userio->serio->write = userio_device_write;
> +       userio->serio->port_data = userio;
> +
> +       file->private_data = userio;
> +
> +       return 0;
> +}
> +
> +static int userio_char_release(struct inode *inode, struct file *file)
> +{
> +       struct userio_device *userio = file->private_data;
> +
> +       if (userio->serio) {

This condition is always true, so you can drop it.

> +               /* Don't free the serio port here, serio_unregister_port() does
> +                * this for us */
> +               if (userio->running)
> +                       serio_unregister_port(userio->serio);
> +               else
> +                       kfree(userio->serio);
> +       }
> +
> +       kfree(userio);
> +
> +       return 0;
> +}
> +
> +static ssize_t userio_char_read(struct file *file, char __user *buffer,
> +                               size_t count, loff_t *ppos)
> +{
> +       struct userio_device *userio = file->private_data;
> +       int ret;
> +       size_t nonwrap_len, copylen;
> +
> +       if (!count)
> +               return 0;
> +
> +       /*
> +        * By the time we get here, the data that was waiting might have been
> +        * taken by another thread. Grab the mutex and check if there's still
> +        * any data waiting, otherwise repeat repeat this process until we have

"repeat repeat" -> "repeat"

> +        * data (unless the file descriptor is non-blocking of course)
> +        */
> +       for (;;) {
> +               ret = mutex_lock_interruptible(&userio->lock);
> +               if (ret)
> +                       return ret;
> +
> +               if (userio->head != userio->tail)
> +                       break;
> +
> +               mutex_unlock(&userio->lock);
> +
> +               if (file->f_flags & O_NONBLOCK)
> +                       return -EAGAIN;
> +
> +               ret = wait_event_interruptible(userio->waitq,
> +                                              userio->head != userio->tail);
> +               if (ret)
> +                       return ret;
> +       }
> +
> +       nonwrap_len = CIRC_CNT_TO_END(userio->head, userio->tail,
> +                                     USERIO_BUFSIZE);
> +       copylen = min(nonwrap_len, count);
> +
> +       if (copy_to_user(buffer, &userio->buf[userio->tail], copylen)) {
> +               mutex_unlock(&userio->lock);
> +               return -EFAULT;
> +       }
> +
> +       userio->tail = (userio->tail + copylen) % USERIO_BUFSIZE;
> +
> +       mutex_unlock(&userio->lock);
> +
> +       return copylen;
> +}
> +
> +static ssize_t userio_char_write(struct file *file, const char __user *buffer,
> +                                size_t count, loff_t *ppos)
> +{
> +       struct userio_device *userio = file->private_data;
> +       struct userio_cmd cmd;
> +       int ret;
> +
> +       if (count < sizeof(cmd))
> +               return -EINVAL;
> +
> +       if (copy_from_user(&cmd, buffer, sizeof(cmd)))
> +               return -EFAULT;
> +
> +       ret = mutex_lock_interruptible(&userio->lock);
> +       if (ret)
> +               return ret;
> +
> +       ret = -EINVAL;

I'd avoid declaring error-codes before checking a condition. Sure,
it's less code, but quite hard to read when figuring out what codes
are generated by each error-path.

Regardless of this, please also try to find more descriptive error
codes. EINVAL is fine for paths that never change, but really annoying
for everything else. This is especially the case for fallbacks, but
see below.

> +
> +       switch (cmd.type) {
> +       case USERIO_CMD_REGISTER:
> +               if (!userio->serio->id.type) {
> +                       dev_warn(userio_misc.this_device,
> +                                "No port type given on /dev/userio\n");
> +

    ret = -EINVAL;

> +                       goto out;
> +               }
> +               if (userio->running) {
> +                       dev_warn(userio_misc.this_device,
> +                                "Begin command sent, but we're already running\n");
> +

How about:
    ret = -EBUSY;

> +                       goto out;
> +               }
> +
> +               userio->running = true;
> +               serio_register_port(userio->serio);
> +               break;
> +
> +       case USERIO_CMD_SET_PORT_TYPE:
> +               if (userio->running) {
> +                       dev_warn(userio_misc.this_device,
> +                                "Can't change port type on an already running userio instance\n");
> +

    ret = -EBUSY;

> +                       goto out;
> +               }
> +
> +               userio->serio->id.type = cmd.data;
> +               break;
> +
> +       case USERIO_CMD_SEND_INTERRUPT:
> +               if (!userio->running) {
> +                       dev_warn(userio_misc.this_device,
> +                                "The device must be registered before sending interrupts\n");
> +

How about:
    ret = -ENODEV;

> +                       goto out;
> +               }
> +
> +               serio_interrupt(userio->serio, cmd.data, 0);
> +               break;
> +
> +       default:

Please use a proper error-code here, as you might check for it once
you add new commands. Common codes here are ENOTTY (grossly misnamed,
but historically picked) or EOPNOTSUPP.

> +               goto out;
> +       }
> +
> +       ret = sizeof(cmd);

Your handler silently ignores any trailing bytes, which is kinda
weird, but I guess it's fine.

> +
> +out:
> +       mutex_unlock(&userio->lock);
> +       return ret;
> +}
> +
> +static unsigned int userio_char_poll(struct file *file, poll_table *wait)
> +{
> +       struct userio_device *userio = file->private_data;
> +
> +       poll_wait(file, &userio->waitq, wait);
> +
> +       if (userio->head != userio->tail)
> +               return POLLIN | POLLRDNORM;
> +
> +       return 0;
> +}
> +
> +static const struct file_operations userio_fops = {
> +       .owner          = THIS_MODULE,
> +       .open           = userio_char_open,
> +       .release        = userio_char_release,
> +       .read           = userio_char_read,
> +       .write          = userio_char_write,
> +       .poll           = userio_char_poll,
> +       .llseek         = no_llseek,
> +};
> +
> +static struct miscdevice userio_misc = {
> +       .fops   = &userio_fops,
> +       .minor  = MISC_DYNAMIC_MINOR,

Please allocate this statically, otherwise on-demand loading will not
work. That is, add a new entry named USERIO_MINOR to
linux/miscdevice.h and set it here. Then you also need to add these
lines below:

        MODULE_ALIAS_MISCDEV(USERIO_MINOR);
        MODULE_ALIAS("devname:" USERIO_NAME);

For background information, have a look at:

    commit 19872d20c890073c5207d9e02bb8f14d451a11eb
    Author: David Herrmann <dh.herrmann@xxxxxxxxx>
    Date:   Mon Sep 9 18:33:54 2013 +0200

        HID: uhid: allocate static minor

> +       .name   = USERIO_NAME,
> +};
> +
> +MODULE_AUTHOR("Stephen Chandler Paul <thatslyude@xxxxxxxxx>");
> +MODULE_DESCRIPTION("userio");

This is not really a module description ;) How about:

MODULE_DESCRIPTION("Virtual Serio Device Support");

> +MODULE_LICENSE("GPL");
> +
> +module_driver(userio_misc, misc_register, misc_deregister);
> diff --git a/include/uapi/linux/userio.h b/include/uapi/linux/userio.h
> new file mode 100644
> index 0000000..da0a3d6
> --- /dev/null
> +++ b/include/uapi/linux/userio.h
> @@ -0,0 +1,42 @@
> +/*
> + * userio.h

Try to avoid mentioning filenames. This just gets out of date when
moved, etc. and doesn't add much value. Just replace it with a module
description "userio: virtual serio device support".

> + * Copyright (C) 2015 Red Hat
> + * Copyright (C) 2015 Lyude (Stephen Chandler Paul) <cpaul@xxxxxxxxxx>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU Lesser General Public License as published by the
> + * Free Software Foundation; either version 2 of the License, or (at your
> + * option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
> + * FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more
> + * details.
> + *
> + * This is the public header used for user-space communication with the userio
> + * driver. __attribute__((__packed__)) is used  for all structs to keep ABI
> + * compatibility between all architectures.
> + */
> +
> +#ifndef _USERIO_H
> +#define _USERIO_H
> +
> +#include <linux/types.h>
> +
> +#define USERIO_CMD_REGISTER            0
> +#define USERIO_CMD_SET_PORT_TYPE       1
> +#define USERIO_CMD_SEND_INTERRUPT      2

Why not an enum?

> +
> +/*
> + * userio Commands
> + * All commands sent to /dev/userio are encoded using this structure. The type
> + * field should contain a USERIO_CMD* value that indicates what kind of command
> + * is being sent to userio. The data field should contain the accompanying
> + * argument for the command, if there is one.
> + */
> +struct userio_cmd {
> +       __u8 type;
> +       __u8 data;
> +} __attribute__((__packed__));

What's your plan on allowing future extensions with bigger payloads?
Do you intend to follow the uhid-style and just subclass the
structures like:

struct userio_cmd_foobar {
        struct userio_cmd base;
        __u8 foobar[128];
} __attribute__((__packed__));



Looks good to me!

Thanks
David

> +
> +#endif /* !_USERIO_H */
> --
> 2.4.3
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-input" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-api" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux