Re: [GIT PULL] Compute Express Linux (CXL) for v5.12-rc1

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



As much as I'd love to be working on "Compute Express Linux" the
subject should have read "Compute Express Link".

On Tue, Feb 23, 2021 at 8:05 PM Dan Williams <dan.j.williams@xxxxxxxxx> wrote:
>
> Hi Linus, please pull from:
>
>   git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm tags/cxl-for-5.12
>
> ...to receive an initial driver for CXL 2.0 Memory Devices. Technical
> details are in the tag message and Documentation/. I am taking this
> through nvdimm.git this first cycle until the cxl.git repository and
> maintainer team can be set up on git.kernel.org.
>
> In terms of why merge this initial driver now, it establishes just
> enough functionality to enumerate these devices and issue all
> administrative commands. It sets a v5.12 baseline to develop the more
> complicated higher order functionality like memory device
> interleaving, persistent memory support, and hotplug which entangle
> with ACPI, LIBNVDIMM, and PCI.
>
> The focus of this release is establishing the ioctl UAPI for the
> management commands. Similar to NVME there are a set of standard
> commands as well as the possibility for vendor specific commands.
> Unlike the NVME driver the CXL driver does not enable vendor specific
> command functionality by default. This conservatism is out of concern
> for the fact that CXL interleaves memory across devices and implements
> host memory. The system integrity implications of some commands are
> more severe than NVME and vendor specific functionality is mostly
> unauditable. This will be an ongoing topic of discussion with the
> wider CXL community for next few months.
>
> The driver has been developed in the open since November against a
> work-in-progress QEMU emulation of the CXL device model. That QEMU
> effort has recently attracted contributions from multiple hardware
> vendors.
>
> The driver has appeared in -next. It collected some initial static
> analysis fixes and build-robot reports, but all quiet in -next for the
> past week.
>
> A list of review tags that arrived after the branch for -next was cut
> is appended to the tag message below.
>
> ---
>
> The following changes since commit 1048ba83fb1c00cd24172e23e8263972f6b5d9ac:
>
>   Linux 5.11-rc6 (2021-01-31 13:50:09 -0800)
>
> are available in the Git repository at:
>
>   git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm tags/cxl-for-5.12
>
> for you to fetch changes up to 88ff5d466c0250259818f3153dbdc4af1f8615dd:
>
>   cxl/mem: Fix potential memory leak (2021-02-22 14:44:39 -0800)
>
> ----------------------------------------------------------------
> cxl for 5.12
>
> Introduce an initial driver for CXL 2.0 Type-3 Memory Devices. CXL is
> Compute Express Link which released the 2.0 specification in November.
> The Linux relevant changes in CXL 2.0 are support for an OS to
> dynamically assign address space to memory devices, support for
> switches, persistent memory, and hotplug. A Type-3 Memory Device is a
> PCI enumerated device presenting the CXL Memory Device Class Code and
> implementing the CXL.mem protocol. CXL.mem allows device to advertise
> CPU and I/O coherent memory to the system, i.e. typical "System RAM" and
> "Persistent Memory" in Linux /proc/iomem terms.
>
> In addition to the CXL.mem fast path there is an administrative command
> hardware mailbox interface for maintenance and provisioning. It is this
> command interface that is the focus of the initial driver. With this
> driver a CXL device that is mapped by the BIOS can be administered by
> Linux. Linux support for CXL PMEM and dynamic CXL address space
> management are to be implemented post v5.12.
>
> 4cdadfd5e0a7 cxl/mem: Introduce a driver for CXL-2.0-Type-3 endpoints
> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@xxxxxxxxxx>
>
> 8adaf747c9f0 cxl/mem: Find device capabilities
> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
>
> b39cb1052a5c cxl/mem: Register CXL memX devices
> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
>
> 13237183c735 cxl/mem: Add a "RAW" send command
> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@xxxxxxxxxx>
>
> 472b1ce6e9d6 cxl/mem: Enable commands via CEL
> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@xxxxxxxxxx>
>
> 57ee605b976c cxl/mem: Add set of informational commands
> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@xxxxxxxxxx>
>
> ----------------------------------------------------------------
> Ben Widawsky (7):
>       cxl/mem: Find device capabilities
>       cxl/mem: Add basic IOCTL interface
>       cxl/mem: Add a "RAW" send command
>       cxl/mem: Enable commands via CEL
>       cxl/mem: Add set of informational commands
>       MAINTAINERS: Add maintainers of the CXL driver
>       cxl/mem: Fix potential memory leak
>
> Dan Carpenter (1):
>       cxl/mem: Return -EFAULT if copy_to_user() fails
>
> Dan Williams (2):
>       cxl/mem: Introduce a driver for CXL-2.0-Type-3 endpoints
>       cxl/mem: Register CXL memX devices
>
>  .clang-format                                      |    1 +
>  Documentation/ABI/testing/sysfs-bus-cxl            |   26 +
>  Documentation/driver-api/cxl/index.rst             |   12 +
>  Documentation/driver-api/cxl/memory-devices.rst    |   46 +
>  Documentation/driver-api/index.rst                 |    1 +
>  Documentation/userspace-api/ioctl/ioctl-number.rst |    1 +
>  MAINTAINERS                                        |   11 +
>  drivers/Kconfig                                    |    1 +
>  drivers/Makefile                                   |    1 +
>  drivers/cxl/Kconfig                                |   53 +
>  drivers/cxl/Makefile                               |    7 +
>  drivers/cxl/bus.c                                  |   29 +
>  drivers/cxl/cxl.h                                  |   95 ++
>  drivers/cxl/mem.c                                  | 1552 ++++++++++++++++++++
>  drivers/cxl/pci.h                                  |   31 +
>  include/linux/pci_ids.h                            |    1 +
>  include/uapi/linux/cxl_mem.h                       |  172 +++
>  17 files changed, 2040 insertions(+)
>  create mode 100644 Documentation/ABI/testing/sysfs-bus-cxl
>  create mode 100644 Documentation/driver-api/cxl/index.rst
>  create mode 100644 Documentation/driver-api/cxl/memory-devices.rst
>  create mode 100644 drivers/cxl/Kconfig
>  create mode 100644 drivers/cxl/Makefile
>  create mode 100644 drivers/cxl/bus.c
>  create mode 100644 drivers/cxl/cxl.h
>  create mode 100644 drivers/cxl/mem.c
>  create mode 100644 drivers/cxl/pci.h
>  create mode 100644 include/uapi/linux/cxl_mem.h



[Index of Archives]     [Linux IBM ACPI]     [Linux Power Management]     [Linux Kernel]     [Linux Laptop]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux