Hi Linus, please pull from:
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm tags/cxl-for-5.12
...to receive an initial driver for CXL 2.0 Memory Devices. Technical
details are in the tag message and Documentation/. I am taking this
through nvdimm.git this first cycle until the cxl.git repository and
maintainer team can be set up on git.kernel.org.
In terms of why merge this initial driver now, it establishes just
enough functionality to enumerate these devices and issue all
administrative commands. It sets a v5.12 baseline to develop the more
complicated higher order functionality like memory device
interleaving, persistent memory support, and hotplug which entangle
with ACPI, LIBNVDIMM, and PCI.
The focus of this release is establishing the ioctl UAPI for the
management commands. Similar to NVME there are a set of standard
commands as well as the possibility for vendor specific commands.
Unlike the NVME driver the CXL driver does not enable vendor specific
command functionality by default. This conservatism is out of concern
for the fact that CXL interleaves memory across devices and implements
host memory. The system integrity implications of some commands are
more severe than NVME and vendor specific functionality is mostly
unauditable. This will be an ongoing topic of discussion with the
wider CXL community for next few months.
The driver has been developed in the open since November against a
work-in-progress QEMU emulation of the CXL device model. That QEMU
effort has recently attracted contributions from multiple hardware
vendors.
The driver has appeared in -next. It collected some initial static
analysis fixes and build-robot reports, but all quiet in -next for the
past week.
A list of review tags that arrived after the branch for -next was cut
is appended to the tag message below.
---
The following changes since commit 1048ba83fb1c00cd24172e23e8263972f6b5d9ac:
Linux 5.11-rc6 (2021-01-31 13:50:09 -0800)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm tags/cxl-for-5.12
for you to fetch changes up to 88ff5d466c0250259818f3153dbdc4af1f8615dd:
cxl/mem: Fix potential memory leak (2021-02-22 14:44:39 -0800)
----------------------------------------------------------------
cxl for 5.12
Introduce an initial driver for CXL 2.0 Type-3 Memory Devices. CXL is
Compute Express Link which released the 2.0 specification in November.
The Linux relevant changes in CXL 2.0 are support for an OS to
dynamically assign address space to memory devices, support for
switches, persistent memory, and hotplug. A Type-3 Memory Device is a
PCI enumerated device presenting the CXL Memory Device Class Code and
implementing the CXL.mem protocol. CXL.mem allows device to advertise
CPU and I/O coherent memory to the system, i.e. typical "System RAM" and
"Persistent Memory" in Linux /proc/iomem terms.
In addition to the CXL.mem fast path there is an administrative command
hardware mailbox interface for maintenance and provisioning. It is this
command interface that is the focus of the initial driver. With this
driver a CXL device that is mapped by the BIOS can be administered by
Linux. Linux support for CXL PMEM and dynamic CXL address space
management are to be implemented post v5.12.
4cdadfd5e0a7 cxl/mem: Introduce a driver for CXL-2.0-Type-3 endpoints
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@xxxxxxxxxx>
8adaf747c9f0 cxl/mem: Find device capabilities
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
b39cb1052a5c cxl/mem: Register CXL memX devices
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
13237183c735 cxl/mem: Add a "RAW" send command
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@xxxxxxxxxx>
472b1ce6e9d6 cxl/mem: Enable commands via CEL
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@xxxxxxxxxx>
57ee605b976c cxl/mem: Add set of informational commands
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@xxxxxxxxxx>
----------------------------------------------------------------
Ben Widawsky (7):
cxl/mem: Find device capabilities
cxl/mem: Add basic IOCTL interface
cxl/mem: Add a "RAW" send command
cxl/mem: Enable commands via CEL
cxl/mem: Add set of informational commands
MAINTAINERS: Add maintainers of the CXL driver
cxl/mem: Fix potential memory leak
Dan Carpenter (1):
cxl/mem: Return -EFAULT if copy_to_user() fails
Dan Williams (2):
cxl/mem: Introduce a driver for CXL-2.0-Type-3 endpoints
cxl/mem: Register CXL memX devices
.clang-format | 1 +
Documentation/ABI/testing/sysfs-bus-cxl | 26 +
Documentation/driver-api/cxl/index.rst | 12 +
Documentation/driver-api/cxl/memory-devices.rst | 46 +
Documentation/driver-api/index.rst | 1 +
Documentation/userspace-api/ioctl/ioctl-number.rst | 1 +
MAINTAINERS | 11 +
drivers/Kconfig | 1 +
drivers/Makefile | 1 +
drivers/cxl/Kconfig | 53 +
drivers/cxl/Makefile | 7 +
drivers/cxl/bus.c | 29 +
drivers/cxl/cxl.h | 95 ++
drivers/cxl/mem.c | 1552 ++++++++++++++++++++
drivers/cxl/pci.h | 31 +
include/linux/pci_ids.h | 1 +
include/uapi/linux/cxl_mem.h | 172 +++
17 files changed, 2040 insertions(+)
create mode 100644 Documentation/ABI/testing/sysfs-bus-cxl
create mode 100644 Documentation/driver-api/cxl/index.rst
create mode 100644 Documentation/driver-api/cxl/memory-devices.rst
create mode 100644 drivers/cxl/Kconfig
create mode 100644 drivers/cxl/Makefile
create mode 100644 drivers/cxl/bus.c
create mode 100644 drivers/cxl/cxl.h
create mode 100644 drivers/cxl/mem.c
create mode 100644 drivers/cxl/pci.h
create mode 100644 include/uapi/linux/cxl_mem.h
