On 2020/6/29 17:05, Lorenzo Pieralisi wrote:
On Mon, Jun 29, 2020 at 12:24:43PM +0800, Hanjun Guo wrote:
Hi Lorenzo,
On 2020/6/19 16:20, Lorenzo Pieralisi wrote:
When the iort_match_node_callback is invoked for a named component
the match should be executed upon a device with an ACPI companion.
For devices with no ACPI companion set-up the ACPI device tree must be
walked in order to find the first parent node with a companion set and
check the parent node against the named component entry to check whether
there is a match and therefore an IORT node describing the in/out ID
translation for the device has been found.
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@xxxxxxx>
Cc: Will Deacon <will@xxxxxxxxxx>
Cc: Hanjun Guo <guohanjun@xxxxxxxxxx>
Cc: Sudeep Holla <sudeep.holla@xxxxxxx>
Cc: Catalin Marinas <catalin.marinas@xxxxxxx>
Cc: Robin Murphy <robin.murphy@xxxxxxx>
Cc: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
---
drivers/acpi/arm64/iort.c | 20 ++++++++++++++++++--
1 file changed, 18 insertions(+), 2 deletions(-)
diff --git a/drivers/acpi/arm64/iort.c b/drivers/acpi/arm64/iort.c
index 28a6b387e80e..5eee81758184 100644
--- a/drivers/acpi/arm64/iort.c
+++ b/drivers/acpi/arm64/iort.c
@@ -264,15 +264,31 @@ static acpi_status iort_match_node_callback(struct acpi_iort_node *node,
if (node->type == ACPI_IORT_NODE_NAMED_COMPONENT) {
struct acpi_buffer buf = { ACPI_ALLOCATE_BUFFER, NULL };
- struct acpi_device *adev = to_acpi_device_node(dev->fwnode);
+ struct acpi_device *adev;
struct acpi_iort_named_component *ncomp;
+ struct device *nc_dev = dev;
+
+ /*
+ * Walk the device tree to find a device with an
+ * ACPI companion; there is no point in scanning
+ * IORT for a device matching a named component if
+ * the device does not have an ACPI companion to
+ * start with.
+ */
+ do {
+ adev = ACPI_COMPANION(nc_dev);
+ if (adev)
+ break;
+
+ nc_dev = nc_dev->parent;
+ } while (nc_dev);
I'm lost here, we need the ACPI_COMPANION (the same as
to_acpi_device_node()) of the device, but why do we need to go
up to find the parent node?
For devices that aren't described in the DSDT - IORT translations
are determined by their ACPI parent device. Do you see/Have you
found any issue with this approach ?
The spec says "Describes the IO relationships between devices
represented in the ACPI namespace.", and in section 3.1.1.3 Named
component node, it says:
"Named component nodes are used to describe devices that are also
included in the Differentiated System Description Table (DSDT). See
[ACPI]."
So from my understanding, the IORT spec for now, can only do ID
translations for devices in the DSDT.
For a platform device, if I use its parent's full path name for
its named component entry, then it will match, but this will violate
the IORT spec.
Can you elaborate on this please I don't get the point you
are making.
For example, device A is not described in DSDT so can't represent
as a NC node in IORT. Device B can be described in DSDT and it
is the parent of device A, so device B can be represented in IORT
with memory access properties and node flags with Substream width
and Stall supported info.
When we trying to translate device A's ID, we reuse all the memory
access properties and node flags from its parent (device B), but
will it the same?
So the IORT spec don't support this, at least it's pretty vague
I think.
Thanks
Hanjun
