2018-01-03 14:33 GMT+01:00 Andrew Lunn <andrew@xxxxxxx>:
> On Wed, Jan 03, 2018 at 02:13:09PM +0100, Marcin Wojtas wrote:
>> Hi Andrew,
>>
>> 2018-01-03 13:47 GMT+01:00 Andrew Lunn <andrew@xxxxxxx>:
>> >> I already agreed with 'reg' being awkward in the later emails.
>> >> Wouldn't _ADR be more appropriate to specify PHY address on MDIO bus?
>> >
>> > Also, how do you specify which MDIO bus the PHY is on. To fully
>> > specify a PHY, you need both bits of information.
>> >
>> > In DT, the phy-handle phandle can point to any PHY anywhere in the
>> > system. This is particularly important when a Ethernet device has two
>> > MDIO busses.
>> >
>>
>> For now, my local MDIO bus description is pretty DT-like, i.e. master
>> bus with children PHYs:
>> Device (MDIO)
>> {
>> Name (_HID, "MRVL0100") //
>> _HID: Hardware ID
>> Name (_UID, 0x00) //
>> _UID: Unique ID
>> Name (_CRS, ResourceTemplate ()
>> {
>> Memory32Fixed (ReadWrite,
>> 0xf212a200, // Address Base
>> 0x00000010, //
>> Address Length
>> )
>> })
>> Device (GPHY)
>> {
>> Name (_ADR, 0x0)
>> }
>> }
>>
>> Device (XSMI)
>> {
>> Name (_HID, "MRVL0101") //
>> _HID: Hardware ID
>> Name (_UID, 0x00) //
>> _UID: Unique ID
>> Name (_CRS, ResourceTemplate ()
>> {
>> Memory32Fixed (ReadWrite,
>> 0xf212a600, // Address Base
>> 0x00000010, //
>> Address Length
>> )
>> })
>> Device (PHY0)
>> {
>> Name (_ADR, 0x0)
>> Name (_CID, "ethernet-phy-ieee802.3-c45")
>> }
>> Device (PHY8)
>> {
>> Name (_ADR, 0x8)
>> Name (_CID, "ethernet-phy-ieee802.3-c45")
>> }
>> }
>>
>> Which is referenced in the port's node:
>>
>> Package () { "phy", Package (){\_SB.XSMI.PHY0}},
>
> Hi Marcin
>
> This reference looks good, giving both the bus and the PHY on the bus.
>
> I assume you can use references like this within the Device (PHY8)
> node?
Yes.
> You need to be able to reference a GPIO used for resetting the
> PHY. And you also need to reference a GPIO at the Device (MDIO) level
> for resetting all the PHYs on the MDIO bus.
>
Yes, for full support of PHYs the GPIO must be supported, as well as
the PHY's IRQs.
Best regards,
Marcin
--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
