Re: [PATCH 1/2] serdev: Add ACPI support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Oct 04, 2017 at 10:51:29AM +0200, Frédéric Danis wrote:
> This patch allows SerDev module to manage serial devices declared as
> attached to an UART in ACPI table.
> 
> acpi_serdev_add_device() callback will only take into account entries
> without enumerated flag set. This flags is set for all entries during
> ACPI scan, except for SPI and I2C serial devices, and for UART with
> 2nd patch in the series.
> 
> Signed-off-by: Frédéric Danis <frederic.danis.oss@xxxxxxxxx>
> ---
>  drivers/tty/serdev/core.c | 99 ++++++++++++++++++++++++++++++++++++++++++++---
>  1 file changed, 94 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/tty/serdev/core.c b/drivers/tty/serdev/core.c
> index c68fb3a..104777d 100644
> --- a/drivers/tty/serdev/core.c
> +++ b/drivers/tty/serdev/core.c

> @@ -385,6 +401,74 @@ static int of_serdev_register_devices(struct serdev_controller *ctrl)
>  	return 0;
>  }
>  
> +#ifdef CONFIG_ACPI
> +static acpi_status acpi_serdev_register_device(struct serdev_controller *ctrl,
> +					    struct acpi_device *adev)
> +{
> +	struct serdev_device *serdev = NULL;
> +	int err;
> +
> +	if (acpi_bus_get_status(adev) || !adev->status.present ||
> +	    acpi_device_enumerated(adev))
> +		return AE_OK;
> +
> +	serdev = serdev_device_alloc(ctrl);
> +	if (!serdev) {
> +		dev_err(&ctrl->dev, "failed to allocate Serial device for %s\n",

s/Serial/serdev/

> +			dev_name(&adev->dev));
> +		return AE_NO_MEMORY;
> +	}
> +
> +	ACPI_COMPANION_SET(&serdev->dev, adev);
> +	acpi_device_set_enumerated(adev);
> +
> +	err = serdev_device_add(serdev);
> +	if (err) {
> +		dev_err(&serdev->dev,
> +			"failure adding ACPI device. status %d\n", err);

s/ACPI/ACPI serdev/?

> +		serdev_device_put(serdev);
> +	}
> +
> +	return AE_OK;
> +}
> +
> +static acpi_status acpi_serdev_add_device(acpi_handle handle, u32 level,
> +				       void *data, void **return_value)
> +{
> +	struct serdev_controller *ctrl = data;
> +	struct acpi_device *adev;
> +
> +	if (acpi_bus_get_device(handle, &adev))
> +		return AE_OK;
> +
> +	return acpi_serdev_register_device(ctrl, adev);
> +}
> +
> +static int acpi_serdev_register_devices(struct serdev_controller *ctrl)
> +{
> +	acpi_status status;
> +	acpi_handle handle;
> +
> +	handle = ACPI_HANDLE(ctrl->dev.parent);
> +	if (!handle)
> +		return -ENODEV;
> +
> +	status = acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, 1,
> +				     acpi_serdev_add_device, NULL, ctrl, NULL);
> +	if (ACPI_FAILURE(status)) {
> +		dev_warn(&ctrl->dev, "failed to enumerate Serial slaves\n");

s/Serial/serdev/

> +		return -ENODEV;
> +	}
> +
> +	return 0;

What if there are no slaves defined? I'm not very familiar with the ACPI
helpers, but from a quick look it seems you'd then end up returning zero
here which would cause the serdev controller to be registered instead of
the tty-class device.

[ And if I'm mistaken, you do want to suppress that error message for
when there are no slaves defined. ]

> +}
> +#else
> +static inline int acpi_serdev_register_devices(struct serdev_controller *ctlr)

s/ctlr/ctrl/

> +{
> +	return -ENODEV;
> +}
> +#endif /* CONFIG_ACPI */
> +
>  /**
>   * serdev_controller_add() - Add an serdev controller
>   * @ctrl:	controller to be registered.
> @@ -394,7 +478,7 @@ static int of_serdev_register_devices(struct serdev_controller *ctrl)
>   */
>  int serdev_controller_add(struct serdev_controller *ctrl)
>  {
> -	int ret;
> +	int ret_of, ret_acpi, ret;
>  
>  	/* Can't register until after driver model init */
>  	if (WARN_ON(!is_registered))
> @@ -404,9 +488,14 @@ int serdev_controller_add(struct serdev_controller *ctrl)
>  	if (ret)
>  		return ret;
>  
> -	ret = of_serdev_register_devices(ctrl);
> -	if (ret)
> +	ret_of = of_serdev_register_devices(ctrl);
> +	ret_acpi = acpi_serdev_register_devices(ctrl);
> +	if (ret_of && ret_acpi) {
> +		dev_dbg(&ctrl->dev, "serdev%d no devices registered: of:%d acpi:%d\n",

"serdev%d" is redundant here as you're using dev_dbg (which will print
the device name).

> +			ctrl->nr, ret_of, ret_acpi);
> +		ret = -ENODEV;
>  		goto out_dev_del;
> +	}
>  
>  	dev_dbg(&ctrl->dev, "serdev%d registered: dev:%p\n",
>  		ctrl->nr, &ctrl->dev);

Hmm, I see it's already used here. No need to follow that example
though.

Johan
--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux IBM ACPI]     [Linux Power Management]     [Linux Kernel]     [Linux Laptop]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux