On Fri, Apr 21, 2017 at 10:22:52AM +0800, zhichang.yuan wrote:
> Hi, Dann,
>
>
>
> On 04/21/2017 04:57 AM, dann frazier wrote:
> > On Thu, Mar 30, 2017 at 9:26 AM, zhichang.yuan
> > <yuanzhichang@xxxxxxxxxxxxx> wrote:
> >> On some platforms(such as Hip06/Hip07), the legacy ISA/LPC devices access I/O
> >> with some special host-local I/O ports known on x86. To access the I/O
> >> peripherals, an indirect-IO mechanism is introduced to mapped the host-local
> >> I/O to system logical/fake PIO similar the PCI MMIO on architectures where no
> >> separate I/O space exists. Just as PCI MMIO, the host I/O range should be
> >> registered before probing the downstream devices and set up the I/O mapping.
> >> But current ACPI bus probing doesn't support these indirect-IO hosts/devices.
> >>
> >> This patch introdueces a new ACPI handler for this device category. Through the
> >> handler attach callback, the indirect-IO hosts I/O registration is done and
> >> all peripherals' I/O resources are translated into logic/fake PIO before
> >> starting the enumeration.
> >>
> >> Signed-off-by: zhichang.yuan <yuanzhichang@xxxxxxxxxxxxx>
> >> Signed-off-by: Gabriele Paoloni <gabriele.paoloni@xxxxxxxxxx>
> >> ---
> >> drivers/acpi/Makefile | 1 +
> >> drivers/acpi/acpi_indirectio.c | 344 +++++++++++++++++++++++++++++++++++++++++
> >> drivers/acpi/internal.h | 5 +
> >> drivers/acpi/scan.c | 1 +
> >> 4 files changed, 351 insertions(+)
> >> create mode 100644 drivers/acpi/acpi_indirectio.c
> >>
> >> diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile
> >> index a391bbc..10e5f2b 100644
> >> --- a/drivers/acpi/Makefile
> >> +++ b/drivers/acpi/Makefile
> >> @@ -57,6 +57,7 @@ acpi-$(CONFIG_ACPI_PROCFS_POWER) += cm_sbs.o
> >> acpi-y += acpi_lpat.o
> >> acpi-$(CONFIG_ACPI_GENERIC_GSI) += irq.o
> >> acpi-$(CONFIG_ACPI_WATCHDOG) += acpi_watchdog.o
> >> +acpi-$(CONFIG_INDIRECT_PIO) += acpi_indirectio.o
> >>
> >> # These are (potentially) separate modules
> >>
> >> diff --git a/drivers/acpi/acpi_indirectio.c b/drivers/acpi/acpi_indirectio.c
> >> new file mode 100644
> >> index 0000000..c8c80b5
> >> --- /dev/null
> >> +++ b/drivers/acpi/acpi_indirectio.c
> >> @@ -0,0 +1,344 @@
>
> [snip]
>
> >> +acpi_build_logiciores_template(struct acpi_device *adev,
> >> + struct acpi_buffer *buffer)
> >> +{
> >> + acpi_handle handle = adev->handle;
> >> + struct acpi_resource *resource;
> >> + acpi_status status;
> >> + int res_cnt = 0;
> >> +
> >> + status = acpi_walk_resources(handle, METHOD_NAME__CRS,
> >> + acpi_count_logiciores, &res_cnt);
> >> + if (ACPI_FAILURE(status) || !res_cnt) {
> >> + dev_err(&adev->dev, "can't evaluate _CRS: %d\n", status);
> >> + return -EINVAL;
> >> + }
> >> +
> >> + buffer->length = sizeof(struct acpi_resource) * (res_cnt + 1) + 1;
> >> + buffer->pointer = kzalloc(buffer->length - 1, GFP_KERNEL);
> >
> > (Seth Forshee noticed this issue, just passing it on)
> >
> > Should this just allocate the full buffer->length? That would keep the
> > length attribute accurate (possibly avoiding an off-by-1 error later).
> > It's not clear what the trailing byte is needed for, but other drivers
> > allocate it as well (drivers/acpi/pci_link.c and
> > drivers/platform/x86/sony-laptop.c).
>
> Thanks for your suggestion!
>
> I also curious why this one appended byte is needed as it seems the later
> acpi_set_current_resources() doesn't use this byte.
> And I tested without setting the buffer->length as the length of resource list
> directly, it seems ok.
>
> But anyway, it looks more reasonable to allocate the memory with the
> buffer->length rather than buffer->length - 1;
>
> I was made the V9 patch-set, and I can add your suggestion there. But I also
> awaiting for ARM64 ACPI maintainer's comment about this patch before really
> sending V9. I wonder whether there is better way to make our indirect-IO devices
> can be assigned the logic PIO before the enumeration...
>
> Lorenzo, Hanjun, what do you think about this patch?
I will get to it shortly, sorry for the delay.
Thanks,
Lorenzo
--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
