Hi,
On Fri, Mar 17, 2017 at 10:55:21AM +0100, Hans de Goede wrote:
> When combined with an external fuel-gauge, upower needs voltage_max_design
> as it internally does all its calculations in Watts and converts the
> charge_foo properties from A to Watts by using voltage_max_design.
>
> Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
Assuming, that my comment on patch 14 works POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN
is required in the fuel-gauge driver instead. As far as I understand
it the charger voltage was too high for your device anyways, so that
you capped it at 4.3V. So I assume, that you can just provide it via
device properties.
-- Sebastian
> drivers/power/supply/bq24190_charger.c | 10 +++++++++-
> 1 file changed, 9 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/power/supply/bq24190_charger.c b/drivers/power/supply/bq24190_charger.c
> index 9fe69a5..82cb33d 100644
> --- a/drivers/power/supply/bq24190_charger.c
> +++ b/drivers/power/supply/bq24190_charger.c
> @@ -1103,6 +1103,13 @@ static int bq24190_battery_get_property(struct power_supply *psy,
> val->intval = POWER_SUPPLY_TECHNOLOGY_UNKNOWN;
> ret = 0;
> break;
> + case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
> + /*
> + * Report charger configured voltage as max design voltage,
> + * not entirely correct, but userspace needs something here.
> + */
> + ret = bq24190_charger_get_voltage(bdi, val);
> + break;
> case POWER_SUPPLY_PROP_TEMP_ALERT_MAX:
> ret = bq24190_battery_get_temp_alert_max(bdi, val);
> break;
> @@ -1169,6 +1176,7 @@ static enum power_supply_property bq24190_battery_properties[] = {
> POWER_SUPPLY_PROP_HEALTH,
> POWER_SUPPLY_PROP_ONLINE,
> POWER_SUPPLY_PROP_TECHNOLOGY,
> + POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
> POWER_SUPPLY_PROP_TEMP_ALERT_MAX,
> POWER_SUPPLY_PROP_SCOPE,
> /* Begin of extended battery properties */
> @@ -1186,7 +1194,7 @@ static const struct power_supply_desc bq24190_battery_desc = {
> .name = "bq24190-battery",
> .type = POWER_SUPPLY_TYPE_BATTERY,
> .properties = bq24190_battery_properties,
> - .num_properties = 6,
> + .num_properties = 7,
> .get_property = bq24190_battery_get_property,
> .set_property = bq24190_battery_set_property,
> .property_is_writeable = bq24190_battery_property_is_writeable,
> --
> 2.9.3
>
Attachment:
signature.asc
Description: PGP signature
