Hi Fu,
On 01/25/2017 01:46 AM, Fu Wei wrote:
> Hi Mark,
>
> On 25 January 2017 at 01:24, Mark Rutland <mark.rutland@xxxxxxx> wrote:
>> On Wed, Jan 18, 2017 at 09:25:32PM +0800, fu.wei@xxxxxxxxxx wrote:
>>> From: Fu Wei <fu.wei@xxxxxxxxxx>
>>>
>>> The counter frequency detection call(arch_timer_detect_rate) combines two
>>> ways to get counter frequency: system coprocessor register and MMIO timer.
>>> But in a specific timer init code, we only need one way to try:
>>> getting frequency from MMIO timer register will be needed only when we
>>> init MMIO timer; getting frequency from system coprocessor register will
>>> be needed only when we init arch timer.
>>
>> When I mentioned this splitting before, I had mean that we'd completely
>> separate the two, with separate mmio_rate and sysreg_rate variables.
>
> sorry for misunderstanding.
>
> Are you saying :
>
> diff --git a/drivers/clocksource/arm_arch_timer.c
> b/drivers/clocksource/arm_arch_timer.c
> index 663a57a..eec92f6 100644
> --- a/drivers/clocksource/arm_arch_timer.c
> +++ b/drivers/clocksource/arm_arch_timer.c
> @@ -65,7 +65,8 @@ struct arch_timer {
>
> #define to_arch_timer(e) container_of(e, struct arch_timer, evt)
>
> -static u32 arch_timer_rate;
> +static u32 arch_timer_sysreg_rate ;
> +static u32 arch_timer_mmio_rate;
> static int arch_timer_ppi[ARCH_TIMER_MAX_TIMER_PPI];
>
> static struct clock_event_device __percpu *arch_timer_evt;
>
>
> But what have I learned From ARMv8 ARM is
> AArch64 System register CNTFRQ_EL0 is provided so that software can
> discover the frequency of the system counter.
> CNTFRQ(in CNTCTLBase and CNTBaseN) is provided so that software can
> discover the frequency of the system counter.
> The bit assignments of the registers are identical in the System
> register interface and in the memory-mapped system level interface.
> So I think they both contain the same value : the frequency of the
> system counter, just in different view, and can be accessed in
> different ways.
>
> So do we really need to separate mmio_rate and sysreg_rate variables?
>
> And for CNTFRQ(in CNTCTLBase and CNTBaseN) , we can NOT access it in
> Linux kernel (EL1),
> Because ARMv8 ARM says:
> In a system that implements both Secure and Non-secure states, this
> register is only accessible by Secure accesses.
> That means we still need to get the frequency of the system counter
> from CNTFRQ_EL0 in MMIO timer code.
> This have been proved when I tested this driver on foundation model, I
> got "0" when I access CNTFRQ from Linux kernel (Non-secure EL1)
That sounds like a firmware problem. Firmware in EL3 is supposed to write
the value into CNTFRQ. If you're not currently using any firmware, I'd
recommend the bootwrapper on models/simulators/emulators.
http://git.kernel.org/cgit/linux/kernel/git/mark/boot-wrapper-aarch64.git/tree/arch/aarch64/boot.S#n48
Cheers,
Cov
--
Qualcomm Datacenter Technologies, Inc. as an affiliate of Qualcomm
Technologies, Inc. Qualcomm Technologies, Inc. is a member of the Code
Aurora Forum, a Linux Foundation Collaborative Project.
--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
