On Monday, February 15, 2016 12:52:01 PM Chen Fan wrote:
> Per the x86-specific footnote to PCI spec r3.0, sec 6.2.4, the value 255 in
> the Interrupt Line register means "unknown" or "no connection."
> Previously, when we couldn't derive an IRQ from the _PRT, we fell back to
> using the value from Interrupt Line as an IRQ. It's questionable whether
> we should do that at all, but the spec clearly suggests we shouldn't do it
> for the value 255 on x86.
>
> Calling request_irq() with IRQ 255 may succeed, but the driver won't
> receive any interrupts. Or, if IRQ 255 is shared with another device, it
> may succeed, and the driver's ISR will be called at random times when the
> *other* device interrupts. Or it may fail if another device is using IRQ
> 255 with incompatible flags. What we *want* is for request_irq() to fail
> predictably so the driver can fall back to polling.
>
> On x86, assume 255 in the Interrupt Line means the INTx line is not
> connected. In that case, set dev->irq to IRQ_NOTCONNECTED so request_irq()
> will fail gracefully with -ENOTCONN.
>
> We found this problem on a system where Secure Boot firmware assigned
> Interrupt Line 255 to an i801_smbus device and another device was already
> using MSI-X IRQ 255. This was in v3.10, where i801_probe() fails if
> request_irq() fails:
>
> i801_smbus 0000:00:1f.3: enabling device (0140 -> 0143)
> i801_smbus 0000:00:1f.3: can't derive routing for PCI INT C
> i801_smbus 0000:00:1f.3: PCI INT C: no GSI
> genirq: Flags mismatch irq 255. 00000080 (i801_smbus) vs. 00000000 (megasa)
> CPU: 0 PID: 2487 Comm: kworker/0:1 Not tainted 3.10.0-229.el7.x86_64 #1
> Hardware name: FUJITSU PRIMEQUEST 2800E2/D3736, BIOS PRIMEQUEST 2000 Serie5
> Call Trace:
> dump_stack+0x19/0x1b
> __setup_irq+0x54a/0x570
> request_threaded_irq+0xcc/0x170
> i801_probe+0x32f/0x508 [i2c_i801]
> local_pci_probe+0x45/0xa0
> i801_smbus 0000:00:1f.3: Failed to allocate irq 255: -16
> i801_smbus: probe of 0000:00:1f.3 failed with error -16
>
> After aeb8a3d16ae0 ("i2c: i801: Check if interrupts are disabled"),
> i801_probe() will fall back to polling if request_irq() fails. But we
> still need this patch because request_irq() may succeed or fail depending
> on other devices in the system. If request_irq() fails, i801_smbus will
> work by falling back to polling, but if it succeeds, i801_smbus won't work
> because it expects interrupts that it may not receive.
>
> Signed-off-by: Chen Fan <chen.fan.fnst@xxxxxxxxxxxxxx>
> Acked-by: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
> Acked-by: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
Applied, thanks!
Rafael
--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
