On Mon, Mar 30, 2015 at 01:45:08PM +0000, Muller, Francois-nicolas wrote:
> Thanks Rafael for your comments.
> Please find my answers embedded below and a new version of the patch.
This makes it quite difficult to find your patch.
Please follow the guidelines in Documentation/SubmittingPatches
when (re)submitting kernel patches.
[ ... ]
>
> I need to be able to enable the panic or not after the warning interrupt.
> I could also use module parameters instead of Kconfig, I don't know which one
> is preferred in this case. Any advice ?
>
There should be one and only one option, and that should trigger a panic.
Pretty much follow the "pretimeout" semantics in
Documentation/watchdog/watchdog-api.txt.
>
> ##################################################################
>
> >From 255184705e94f2983d965ad711f30281a1eed816 Mon Sep 17 00:00:00 2001
> From: Francois-Nicolas Muller <francois-nicolas.muller@xxxxxxxxx>
> Date: Mon, 30 Mar 2015 14:56:39 +0200
> Subject: [PATCH] Adding TCO watchdog warning interrupt handling.
>
> This feature is useful to root cause watchdog expiration.
> It is activated by boot parameter 'warn_irq' (disabled by default).
>
> Upon first expiration of the TCO watchdog, a warning interrupt is fired,
> then the interrupt handler dumps registers and call stack of all available
> cpus.
> TCO watchdog reloads with 2.4 seconds timeout for second expiration.
>
> If CONFIG_ITCO_WARN_PANIC is set, the warning interrupt also calls panic()
> which notifies the panic handlers then reboots the platform, depending on
> CONFIG_PANIC_TIMEOUT value :
>
> - If CONFIG_PANIC_TIMEOUT is zero or greater than 3 seconds, TCO watchdog will
> reset the platform if second expiration happens before TCO has been kicked again.
>
> - If CONFIG_PANIC_TIMEOUT is < 0, platform will reboot immediately (emergency
> restart procedure).
>
> - If CONFIG_PANIC_TIMEOUT is 1 or 2 seconds, platform will reboot after 1 or 2
> seconds delay (emergency restart procedure).
>
> See Documentation/watchdog/tco-wdt-warning-interrupt.txt for more details.
>
> Signed-off-by: Francois-Nicolas Muller <francois-nicolas.muller@xxxxxxxxx>
> ---
> drivers/watchdog/Kconfig | 13 ++++++++++++
> drivers/watchdog/iTCO_wdt.c | 48 +++++++++++++++++++++++++++++++++++++++++++++
> 2 files changed, 61 insertions(+)
>
> --
> 1.9.1
>
> diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
> index 79d2589..41f3647 100644
> --- a/drivers/watchdog/Kconfig
> +++ b/drivers/watchdog/Kconfig
> @@ -674,6 +674,19 @@ config ITCO_VENDOR_SUPPORT
> devices. At this moment we only have additional support for some
> SuperMicro Inc. motherboards.
>
> +config ITCO_WARNING_PANIC
> + bool "Intel TCO Timer/Watchdog panic on warning interrupt"
> + depends on ITCO_WDT && ACPI
> + default y
> + ---help---
> + Force a call to panic() when TCO warning interrupt occurs.
> +
> + Warning interrupt happens if warn_irq module parameter is set and
> + TCO timer first expires.
> +
> + If not set, only cpu backtraces are dumped, no call to panic() and
> + no notification of panic are done.
> +
This option should go away.
> config IT8712F_WDT
> tristate "IT8712F (Smart Guardian) Watchdog Timer"
> depends on X86
> diff --git a/drivers/watchdog/iTCO_wdt.c b/drivers/watchdog/iTCO_wdt.c
> index e802a54..8cfa5e7 100644
> --- a/drivers/watchdog/iTCO_wdt.c
> +++ b/drivers/watchdog/iTCO_wdt.c
> @@ -68,6 +68,8 @@
> #include <linux/pm.h> /* For suspend/resume */
> #include <linux/mfd/core.h>
> #include <linux/mfd/lpc_ich.h>
> +#include <linux/nmi.h>
> +#include <linux/acpi.h>
>
> #include "iTCO_vendor.h"
>
> @@ -126,6 +128,11 @@ module_param(turn_SMI_watchdog_clear_off, int, 0);
> MODULE_PARM_DESC(turn_SMI_watchdog_clear_off,
> "Turn off SMI clearing watchdog (depends on TCO-version)(default=1)");
>
> +static bool warn_irq;
> +module_param(warn_irq, bool, 0);
> +MODULE_PARM_DESC(warn_irq,
> + "Dump all cpus backtraces at first watchdog timer expiration (default=0)");
> +
This option (possibly with a better name) should be the only one
needed to trigger the new functionality.
> /*
> * Some TCO specific functions
> */
> @@ -200,6 +207,41 @@ static int iTCO_wdt_unset_NO_REBOOT_bit(void)
> return ret; /* returns: 0 = OK, -EIO = Error */
> }
>
> +#ifdef CONFIG_ACPI
Question is if this ifdef is needed. Most if not all ACPI functions
are provided as dummies if ACPI is disabled.
> +static unsigned char *tco_hid = "8086229C";
> +static bool warn_irq_panic = CONFIG_ITCO_WARNING_PANIC;
> +
> +static u32 iTCO_wdt_wirq(acpi_handle gpe_device, u32 gpe, void *context)
> +{
> + trigger_all_cpu_backtrace();
> + if (warn_irq_panic)
> + panic("Kernel Watchdog");
panic already implies a backtrace, doesn't it ?
> +
> + return ACPI_INTERRUPT_HANDLED;
> +}
> +
> +static acpi_status __init iTCO_wdt_register_gpe(acpi_handle handle,
> + u32 lvl, void *context, void **rv)
> +{
> + unsigned long long gpe;
> + acpi_status status;
> +
> + status = acpi_evaluate_integer(handle, "_GPE", NULL, &gpe);
> + if (ACPI_FAILURE(status))
> + return status;
> +
> + status = acpi_install_gpe_handler(NULL, gpe, ACPI_GPE_EDGE_TRIGGERED,
> + iTCO_wdt_wirq, NULL);
> + if (ACPI_FAILURE(status))
> + return status;
> +
> + acpi_enable_gpe(NULL, gpe);
> +
> + pr_debug("interrupt=SCI GPE=0x%02llx", gpe);
Is this message really useful ?
> + return AE_OK;
> +}
> +#endif
> +
> static int iTCO_wdt_start(struct watchdog_device *wd_dev)
> {
> unsigned int val;
> @@ -638,9 +680,15 @@ static int __init iTCO_wdt_init_module(void)
> if (err)
> return err;
>
> +#ifdef CONFIG_ACPI
> + if (warn_irq)
> + acpi_get_devices(tco_hid, iTCO_wdt_register_gpe, NULL, NULL);
acpi_get_devices provides a dummy function if ACPI is not configured,
so the #ifdef above is not needed.
> +#endif
> +
> return 0;
> }
>
> +
Please no whitespace changes (much less whitespace changes introducing
checkpatch problems).
> static void __exit iTCO_wdt_cleanup_module(void)
> {
> platform_driver_unregister(&iTCO_wdt_driver);
--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
