0) A ThinkPad X220 I use prints this error at the _first_ resume from
suspend (to ram):
ACPI: \_SB_.PCI0.LPC_.EC__.BAT1: Unable to dock!
1) BAT1 is apparently a "battery bay". Rubin suggested that it is a
"slice" battery. I do not use a "slice" battery. (There are two other
possible docks according to the ACPI printks is get. An "ata bay" and a
"dock station". I don't use those either, but the kernel at least prints
no errors about them.)
2) I've peeked a bit at the DSDT of this machine. Its _WAK method
contains this line:
\_SB.PCI0.LPC.EC.BATW (Arg0)
That BATW method is about 12 lines long. (Can I quote that in full?) It
ends with this snippet:
If (XOr (Local0, Local1))
{
Store (Local1, [...])
Notify (\_SB.PCI0.LPC.EC.BAT1, 0x01) // Device Check
}
3) That ACPI_NOTIFY_DEVICE_CHECK for BAT1 apparently triggers this call
chain:
acpi_bus_notify()
acpi_hotplug_schedule()
acpi_hotplug_work_fn()
acpi_device_hotplug()
dock_notify()
4) Perhaps Lenovo needs to update the ACPI part of this laptop's
firmware. (I'm running the latest firmware.) Does Lenovo listen to
suggestions to update its firmware?
5) A workaround in the kernel _might_ be something utterly untested like
this:
diff --git a/drivers/acpi/dock.c b/drivers/acpi/dock.c
index d9339b442a4e..9e5856a6adfb 100644
--- a/drivers/acpi/dock.c
+++ b/drivers/acpi/dock.c
@@ -333,7 +333,7 @@ static void dock_event(struct dock_station *ds, u32 event, int num)
*
* Execute the _DCK method in response to an acpi event
*/
-static void handle_dock(struct dock_station *ds, int dock)
+static acpi_status handle_dock(struct dock_station *ds, int dock)
{
acpi_status status;
struct acpi_object_list arg_list;
@@ -351,11 +351,12 @@ static void handle_dock(struct dock_station *ds, int dock)
if (ACPI_FAILURE(status) && status != AE_NOT_FOUND)
acpi_handle_err(ds->handle, "Failed to execute _DCK (0x%x)\n",
status);
+ return status;
}
-static inline void dock(struct dock_station *ds)
+static inline acpi_status dock(struct dock_station *ds)
{
- handle_dock(ds, 1);
+ return handle_dock(ds, 1);
}
static inline void undock(struct dock_station *ds)
@@ -471,8 +472,12 @@ int dock_notify(struct acpi_device *adev, u32 event)
case ACPI_NOTIFY_BUS_CHECK:
case ACPI_NOTIFY_DEVICE_CHECK:
if (!dock_in_progress(ds) && !acpi_device_enumerated(adev)) {
+ acpi_status status;
+
begin_dock(ds);
- dock(ds);
+ status = dock(ds);
+ if (status == AE_NOT_FOUND)
+ break;
if (!dock_present(ds)) {
acpi_handle_err(handle, "Unable to dock!\n");
complete_dock(ds);
Please note that BAT1 does have a _EJ0 method but doesn't have a _DCK
method.
6) Any suggestions?
Paul Bolle
--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
