On Tue, Dec 03, 2013 at 04:41:30PM +0000, Hanjun Guo wrote:
> ACPI GTDT (Generic Timer Description Table) contains information for
> arch timer initialization, this patch use this table to probe arm timer.
>
> GTDT table is used for ARM/ARM64 only, please refer to chapter 5.2.24
> of ACPI 5.0 spec for detailed inforamtion
>
> Signed-off-by: Amit Daniel Kachhap <amit.daniel@xxxxxxxxxxx>
> Signed-off-by: Hanjun Guo <hanjun.guo@xxxxxxxxxx>
> ---
> drivers/clocksource/arm_arch_timer.c | 129 ++++++++++++++++++++++++++++++----
> include/clocksource/arm_arch_timer.h | 7 +-
> 2 files changed, 120 insertions(+), 16 deletions(-)
[...]
> +#ifdef CONFIG_ACPI
> +void __init arch_timer_acpi_init(void)
> +{
> + struct acpi_table_gtdt *gtdt;
> + acpi_size tbl_size;
> + int trigger, polarity;
> + void __iomem *base = NULL;
> +
> + if (acpi_disabled)
> + return;
> +
> + if (arch_timers_present & ARCH_CP15_TIMER) {
> + pr_warn("arch_timer: already initialized, skipping\n");
> + return;
> + }
> +
> + if (ACPI_FAILURE(acpi_get_table_with_size(ACPI_SIG_GTDT, 0,
> + (struct acpi_table_header **)>dt, &tbl_size))) {
> + pr_err("arch_timer: GTDT table not defined\n");
> + return;
> + }
> +
> + arch_timers_present |= ARCH_CP15_TIMER;
> +
> + /*
> + * Get the timer frequency. Since there is no frequency info
> + * in the GTDT table, so we should read it from CNTFREG register
> + * or hard code here to wait for the new ACPI spec available.
> + */
If the core's CNTFRQ register does not hold the correct value, that is a
horrendous firmware bug. The clock-frequency property in the DT is a
horrific workaround for buggy firmware.
We should not duplicate it in ACPI; people should be strongly encouraged
to fix their firmware to do what it is supposed to do.
Rely on CNTFRQ only. If it is wrong, then bail out. Let's not create a
fertile environment for buggy firmware.
> + if (!gtdt->address) {
> + arch_timer_rate = arch_timer_get_cntfrq();
> + } else {
> + base = ioremap(gtdt->address, CNTFRQ);
> + if (!base) {
> + pr_warn("arch_timer: unable to map arch timer base address\n");
> + return;
> + }
> +
> + arch_timer_rate = readl_relaxed(base + CNTFRQ);
> + iounmap(base);
> + }
> +
> + if (!arch_timer_rate) {
> + /* Hard code here to set frequence ? */
> + pr_warn("arch_timer: Could not get frequency from GTDT table or CNTFREG\n");
> + }
> +
> + if (gtdt->secure_pl1_interrupt) {
> + trigger = (gtdt->secure_pl1_flags & ACPI_GTDT_INTERRUPT_MODE) ?
> + ACPI_EDGE_SENSITIVE : ACPI_LEVEL_SENSITIVE;
> + polarity =
> + (gtdt->secure_pl1_flags & ACPI_GTDT_INTERRUPT_POLARITY)
> + ? ACPI_ACTIVE_LOW : ACPI_ACTIVE_HIGH;
> + arch_timer_ppi[0] = acpi_register_gsi(NULL,
> + gtdt->secure_pl1_interrupt, trigger, polarity);
> + }
This pattern looks like it can be factored out. I don't see why the
driver needs to have such intimate knowledge of the interrrupt.
> + if (gtdt->non_secure_pl1_interrupt) {
> + trigger =
> + (gtdt->non_secure_pl1_flags & ACPI_GTDT_INTERRUPT_MODE)
> + ? ACPI_EDGE_SENSITIVE : ACPI_LEVEL_SENSITIVE;
> + polarity =
> + (gtdt->non_secure_pl1_flags & ACPI_GTDT_INTERRUPT_POLARITY)
> + ? ACPI_ACTIVE_LOW : ACPI_ACTIVE_HIGH;
> + arch_timer_ppi[1] = acpi_register_gsi(NULL,
> + gtdt->non_secure_pl1_interrupt, trigger, polarity);
> + }
> + if (gtdt->virtual_timer_interrupt) {
> + trigger = (gtdt->virtual_timer_flags & ACPI_GTDT_INTERRUPT_MODE)
> + ? ACPI_EDGE_SENSITIVE : ACPI_LEVEL_SENSITIVE;
> + polarity =
> + (gtdt->virtual_timer_flags & ACPI_GTDT_INTERRUPT_POLARITY)
> + ? ACPI_ACTIVE_LOW : ACPI_ACTIVE_HIGH;
> + arch_timer_ppi[2] = acpi_register_gsi(NULL,
> + gtdt->virtual_timer_interrupt, trigger, polarity);
> + }
> + if (gtdt->non_secure_pl2_interrupt) {
> + trigger =
> + (gtdt->non_secure_pl2_flags & ACPI_GTDT_INTERRUPT_MODE)
> + ? ACPI_EDGE_SENSITIVE : ACPI_LEVEL_SENSITIVE;
> + polarity =
> + (gtdt->non_secure_pl2_flags & ACPI_GTDT_INTERRUPT_POLARITY)
> + ? ACPI_ACTIVE_LOW : ACPI_ACTIVE_HIGH;
> + arch_timer_ppi[3] = acpi_register_gsi(NULL,
> + gtdt->non_secure_pl2_interrupt, trigger, polarity);
> + }
Please factor out the interrupt parsing.
Thanks,
Mark.
--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
