On Sunday, July 14, 2013 10:08:28 AM Mika Westerberg wrote: > On Sat, Jul 13, 2013 at 11:47:26PM +0200, Rafael J. Wysocki wrote: > > On Saturday, July 13, 2013 08:09:59 PM Mika Westerberg wrote: > > > Now that acpiphp_check_bridge() always enumerates devices behind the > > > bridge, there is no need to do that for each sub-bridge anymore like it is > > > done in the current ACPI-based PCI hotplug code. Given this we don't need > > > check_sub_bridges() anymore and can drop the function completely. > > > > > > This also simplifies the ACPIPHP code a bit. > > > > > > Signed-off-by: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx> > > > --- > > > This applies on top of v3.10 with Rafael's ACPIPHP + Thunderbolt series > > > applied: > > > > > > > OK, I added it to my bleeding-edge branch along with this series: > > > > > http://www.spinics.net/lists/linux-acpi/msg44480.html > > > > rebased on top of some previous ACPI cleanup commits. I needed to make some > > changes in the process (and fixed up some breakage reported by the auto build > > testing), hopefully I didn't break anything. If you're in an adventurous mood, > > testing would be welcome. ;-) [That already includes the majority of 3.11 > > material from Linus, though, so unexpected breakage elsewhere may happen.] > > Tried the bleeding-edge branch on both of our test machines and Thunderbolt > still works fine. Can you please apply the appended patch on top of the current linux-pm.git/bleeding-edge and check if things still work then on the test systems? Rafael --- drivers/pci/hotplug/acpiphp_glue.c | 42 ++++++++++++++++++++++++++++++++++++- drivers/pci/remove.c | 20 ----------------- include/linux/pci.h | 1 3 files changed, 41 insertions(+), 22 deletions(-) Index: linux-pm/drivers/pci/hotplug/acpiphp_glue.c =================================================================== --- linux-pm.orig/drivers/pci/hotplug/acpiphp_glue.c +++ linux-pm/drivers/pci/hotplug/acpiphp_glue.c @@ -46,6 +46,7 @@ #include <linux/pci.h> #include <linux/pci_hotplug.h> #include <linux/pci-acpi.h> +#include <linux/pm_runtime.h> #include <linux/mutex.h> #include <linux/slab.h> #include <linux/acpi.h> @@ -680,6 +681,45 @@ static unsigned int get_slot_status(stru } /** + * trim_stale_devices - remove PCI devices that are not responding. + * @dev: PCI device to start walking the hierarchy from. + */ +static void trim_stale_devices(struct pci_dev *dev) +{ + acpi_handle handle = ACPI_HANDLE(&dev->dev); + struct pci_bus *bus = dev->subordinate; + bool alive = false; + + if (handle) { + acpi_status status; + unsigned long long sta; + + status = acpi_evaluate_integer(handle, "_STA", NULL, &sta); + alive = ACPI_SUCCESS(status) && sta == ACPI_STA_ALL; + } + if (!alive) { + u32 v; + + /* Check if the device responds. */ + alive = pci_bus_read_dev_vendor_id(dev->bus, dev->devfn, &v, 0); + } + if (!alive) { + pci_stop_and_remove_bus_device(dev); + if (handle) + acpiphp_bus_trim(handle); + } else if (bus) { + struct pci_dev *child, *tmp; + + /* The device is a bridge. so check the bus below it. */ + pm_runtime_get_sync(&dev->dev); + list_for_each_entry_safe(child, tmp, &bus->devices, bus_list) + trim_stale_devices(child); + + pm_runtime_put(&dev->dev); + } +} + +/** * acpiphp_check_bridge - re-enumerate devices * @bridge: where to begin re-enumeration * @@ -701,7 +741,7 @@ static void acpiphp_check_bridge(struct list_for_each_entry_safe(dev, tmp, &bus->devices, bus_list) if (PCI_SLOT(dev->devfn) == slot->device) - pci_trim_stale_devices(dev); + trim_stale_devices(dev); /* configure all functions */ enable_slot(slot); Index: linux-pm/drivers/pci/remove.c =================================================================== --- linux-pm.orig/drivers/pci/remove.c +++ linux-pm/drivers/pci/remove.c @@ -112,26 +112,6 @@ void pci_stop_and_remove_bus_device(stru } EXPORT_SYMBOL(pci_stop_and_remove_bus_device); -/** - * pci_trim_stale_devices - remove PCI devices that are not responding - * @dev: the device to start walking the hierarchy from - */ -void pci_trim_stale_devices(struct pci_dev *dev) -{ - struct pci_bus *bus = dev->subordinate; - struct pci_dev *child, *tmp; - bool alive; - u32 val; - - /* check if the device responds */ - alive = pci_bus_read_dev_vendor_id(dev->bus, dev->devfn, &val, 0); - if (!alive) - pci_stop_and_remove_bus_device(dev); - else if (bus) - list_for_each_entry_safe(child, tmp, &bus->devices, bus_list) - pci_trim_stale_devices(child); -} - void pci_stop_root_bus(struct pci_bus *bus) { struct pci_dev *child, *tmp; Index: linux-pm/include/linux/pci.h =================================================================== --- linux-pm.orig/include/linux/pci.h +++ linux-pm/include/linux/pci.h @@ -755,7 +755,6 @@ struct pci_dev *pci_dev_get(struct pci_d void pci_dev_put(struct pci_dev *dev); void pci_remove_bus(struct pci_bus *b); void pci_stop_and_remove_bus_device(struct pci_dev *dev); -void pci_trim_stale_devices(struct pci_dev *dev); void pci_stop_root_bus(struct pci_bus *bus); void pci_remove_root_bus(struct pci_bus *bus); void pci_setup_cardbus(struct pci_bus *bus); -- I speak only for myself. Rafael J. Wysocki, Intel Open Source Technology Center. -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
