On 03/05/2012 04:03 AM, Rafael J. Wysocki wrote:
> On Tuesday, February 28, 2012, Srivatsa S. Bhat wrote:
>> acpi_cpu_soft_notify handles only CPU_ONLINE and CPU_DEAD events. However,
>> during a system-wide suspend/hibernation operation, CPU_ONLINE_FROZEN and
>> CPU_DEAD_FROZEN events are sent as part of CPU hotplug.
>>
>> Those events are really no different from regular CPU hotplug in this context,
>> and hence acpi shouldn't ignore them. So, teach acpi_cpu_soft_notify() to
>> handle those events as well.
>>
>> Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@xxxxxxxxxxxxxxxxxx>
>> ---
>>
>> I am no ACPI expert! So requesting a thorough review of this patch..
>
> Well, as far as I can tell, it _looks_ correct. That said, I don't think
> anyone will really tell you on the basis of code review alone, this requires
> testing.
>
> Since Len hasn't been very responsive recently, I can take this patch into
> linux-pm/linux-next and see what the feedback is.
>
I was running some tests (linux mainline, 3.3-rc6+) and I noticed this:
If I try the processors level using pm_test, I get the following ACPI error
on resume: (But note that even though I see that error message, there is no
noticeable damage. ie., suspend/resume etc works as expected.)
[ 118.614331] PM: Syncing filesystems ... done.
[ 118.810015] PM: Preparing system for mem sleep
[ 119.023881] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 119.036740] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 119.049251] PM: Entering mem sleep
[ 119.050864] Suspending console(s) (use no_console_suspend to debug)
[ 119.212380] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 119.292494] sd 0:0:0:0: [sda] Stopping disk
[ 119.454865] [drm] nouveau 0000:01:00.0: Disabling display...
[ 119.455150] [drm] nouveau 0000:01:00.0: Disabling fbcon...
[ 119.455159] [drm] nouveau 0000:01:00.0: Unpinning framebuffer(s)...
[ 119.455235] [drm] nouveau 0000:01:00.0: Evicting buffers...
[ 119.455308] ACPI handle has no context!
[ 119.468621] i915 0000:00:02.0: power state changed by ACPI to D3
[ 119.469537] [drm] nouveau 0000:01:00.0: Idling channels...
[ 119.469653] [drm] nouveau 0000:01:00.0: Suspending GPU objects...
[ 119.668554] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
[ 119.692192] [drm] nouveau 0000:01:00.0: And we're gone!
[ 119.702686] nouveau 0000:01:00.0: power state changed by ACPI to D3
[ 119.702900] PM: suspend of devices complete after 649.631 msecs
[ 119.705137] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
[ 119.715566] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D3
[ 119.716252] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
[ 119.726557] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D3
[ 119.727183] PM: late suspend of devices complete after 24.279 msecs
[ 119.727928] ACPI: Preparing to enter system sleep state S3
[ 119.773691] PM: Saving platform NVS memory
[ 119.786581] Disabling non-boot CPUs ...
[ 119.789037] CPU 1 is now offline
[ 119.793272] CPU 2 is now offline
[ 119.796330] CPU 3 is now offline
[ 119.796332] lockdep: fixing up alternatives.
[ 119.796914] suspend debug: Waiting for 5 seconds.
[ 124.793624] sched: RT throttling activated
[ 124.830791] Enabling non-boot CPUs ...
[ 124.860880] lockdep: fixing up alternatives.
[ 124.860885] Booting Node 0 Processor 1 APIC 0x1
[ 124.860887] smpboot cpu 1: start_ip = 98000
[ 124.871913] Disabled fast string operations
[ 124.871932] Calibrating delay loop (skipped) already calibrated this CPU
[ 125.052388] NMI watchdog enabled, takes one hw-pmu counter.
[ 125.053207] ACPI Exception: AE_BAD_PARAMETER, Returned by Handler for [EmbeddedControl] (20120111/evregion-501)
[ 125.053215] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPC_.EC__.LPMD] (Node ffff88023286cc58), AE_BAD_PARAMETER (20120111/psparse-536)
[ 125.053231] ACPI Error: Method parse/execution failed [\_PR_.CPU0._PPC] (Node ffff8802328900f0), AE_BAD_PARAMETER (20120111/psparse-536)
[ 125.053244] ACPI Error: Method parse/execution failed [\_PR_.CPU1._PPC] (Node ffff880232890910), AE_BAD_PARAMETER (20120111/psparse-536)
[ 125.053263] ACPI Exception: AE_BAD_PARAMETER, Evaluating _PPC (20120111/processor_perflib-140)
[ 125.053292] CPU1 is up
[ 125.053465] lockdep: fixing up alternatives.
[ 125.053471] Booting Node 0 Processor 2 APIC 0x2
[ 125.053473] smpboot cpu 2: start_ip = 98000
[ 125.064508] Disabled fast string operations
[ 125.064526] Calibrating delay loop (skipped) already calibrated this CPU
[ 125.085490] NMI watchdog enabled, takes one hw-pmu counter.
[ 125.086393] ACPI Exception: AE_BAD_PARAMETER, Returned by Handler for [EmbeddedControl] (20120111/evregion-501)
[ 125.086402] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPC_.EC__.LPMD] (Node ffff88023286cc58), AE_BAD_PARAMETER (20120111/psparse-536)
[ 125.086417] ACPI Error: Method parse/execution failed [\_PR_.CPU0._PPC] (Node ffff8802328900f0), AE_BAD_PARAMETER (20120111/psparse-536)
[ 125.086430] ACPI Error: Method parse/execution failed [\_PR_.CPU2._PPC] (Node ffff880232890ac8), AE_BAD_PARAMETER (20120111/psparse-536)
[ 125.086448] ACPI Exception: AE_BAD_PARAMETER, Evaluating _PPC (20120111/processor_perflib-140)
[ 125.086478] CPU2 is up
[ 125.086675] lockdep: fixing up alternatives.
[ 125.086681] Booting Node 0 Processor 3 APIC 0x3
[ 125.086683] smpboot cpu 3: start_ip = 98000
[ 125.097707] Disabled fast string operations
[ 125.097726] Calibrating delay loop (skipped) already calibrated this CPU
[ 125.118659] NMI watchdog enabled, takes one hw-pmu counter.
[ 125.119203] ACPI Exception: AE_BAD_PARAMETER, Returned by Handler for [EmbeddedControl] (20120111/evregion-501)
[ 125.119210] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPC_.EC__.LPMD] (Node ffff88023286cc58), AE_BAD_PARAMETER (20120111/psparse-536)
[ 125.119220] ACPI Error: Method parse/execution failed [\_PR_.CPU0._PPC] (Node ffff8802328900f0), AE_BAD_PARAMETER (20120111/psparse-536)
[ 125.119228] ACPI Error: Method parse/execution failed [\_PR_.CPU3._PPC] (Node ffff880232890a28), AE_BAD_PARAMETER (20120111/psparse-536)
[ 125.119239] ACPI Exception: AE_BAD_PARAMETER, Evaluating _PPC (20120111/processor_perflib-140)
[ 125.119260] CPU3 is up
[ 125.122640] ACPI: Waking up from system sleep state S3
[ 125.209906] i915 0000:00:02.0: power state changed by ACPI to D0
[ 125.220687] i915 0000:00:02.0: power state changed by ACPI to D0
[ 125.242761] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 125.253677] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 125.253758] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
[ 125.253768] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 125.253774] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 125.265063] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 125.275669] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 125.275750] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
[ 125.275759] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 125.275765] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 125.287074] nouveau 0000:01:00.0: power state changed by ACPI to D0
[ 125.297658] nouveau 0000:01:00.0: power state changed by ACPI to D0
[ 125.308813] sdhci-pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz.
[ 125.309096] PM: early resume of devices complete after 99.415 msecs
[ 125.309229] i915 0000:00:02.0: power state changed by ACPI to D0
[ 125.309236] i915 0000:00:02.0: power state changed by ACPI to D0
[ 125.309243] i915 0000:00:02.0: setting latency timer to 64
[ 125.309334] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
[ 125.309458] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[ 125.317762] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 125.317768] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 125.317783] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 125.317893] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[ 125.317981] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 125.317987] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 125.318000] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 125.318052] ahci 0000:00:1f.2: setting latency timer to 64
[ 125.318471] [drm] nouveau 0000:01:00.0: We're back, enabling device...
[ 125.318477] nouveau 0000:01:00.0: power state changed by ACPI to D0
[ 125.318483] nouveau 0000:01:00.0: power state changed by ACPI to D0
[ 125.318490] nouveau 0000:01:00.0: power state changed by ACPI to D0
[ 125.318496] nouveau 0000:01:00.0: power state changed by ACPI to D0
[ 125.318504] [drm] nouveau 0000:01:00.0: POSTing device...
[ 125.318506] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0x73B5
[ 125.338999] [drm] nouveau 0000:01:00.0: 0x7393: i2c wr fail: -5
[ 125.339207] [drm] nouveau 0000:01:00.0: 0x73A5: i2c rd fail: -5
[ 125.359827] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0x7A29
[ 125.382725] tpm_tis 00:0a: A TPM error (6) occurred attempting to read a pcr value
[ 125.382735] tpm_tis 00:0a: TPM is disabled/deactivated (0x6)
[ 125.386896] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0x89D9
[ 125.386904] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0x89DA
[ 125.386971] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0x8ACB
[ 125.386977] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0x8B30
[ 125.407019] [drm] nouveau 0000:01:00.0: Restoring GPU objects...
[ 125.508179] [drm] nouveau 0000:01:00.0: Reinitialising engines...
[ 125.508303] [drm] nouveau 0000:01:00.0: Restoring mode...
[ 125.640647] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 125.642601] ata4: SATA link down (SStatus 0 SControl 300)
[ 125.643353] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 125.643362] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 125.643369] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 125.644607] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 125.646617] ata5: SATA link down (SStatus 0 SControl 300)
[ 125.768663] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[ 125.768933] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[ 125.768942] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 125.773238] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[ 125.773432] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[ 125.773441] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 125.775032] ata2.00: configured for UDMA/66
[ 128.253678] e1000e: em1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
[ 128.253686] e1000e 0000:00:19.0: em1: 10/100 speed: disabling TSO
[ 128.499934] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 128.499945] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 128.499952] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 128.501667] ata1.00: configured for UDMA/100
[ 128.501962] sd 0:0:0:0: [sda] Starting disk
[ 128.503185] Extended CMOS year: 2000
[ 128.537762] PM: resume of devices complete after 3229.628 msecs
[ 129.025353] PM: Finishing wakeup.
[ 129.028514] Restarting tasks ... done.
[ 129.046206] video LNXVIDEO:00: Restoring backlight state
[ 129.050252] video LNXVIDEO:01: Restoring backlight state
However, if I set none to pm_test and echo mem > /sys/power/state, no such error
message is seen. Same with normal pm-suspend - no error messages.
And when this patch is applied, the ACPI error messages during processors level
test appear twice:
[ 780.064004] PM: Syncing filesystems ... done.
[ 780.284925] PM: Preparing system for mem sleep
[ 780.361141] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 780.373711] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 780.386269] PM: Entering mem sleep
[ 780.387856] Suspending console(s) (use no_console_suspend to debug)
[ 780.564624] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 780.564943] sd 0:0:0:0: [sda] Stopping disk
[ 780.803771] [drm] nouveau 0000:01:00.0: Disabling display...
[ 780.804094] ACPI handle has no context!
[ 780.804103] [drm] nouveau 0000:01:00.0: Disabling fbcon...
[ 780.804111] [drm] nouveau 0000:01:00.0: Unpinning framebuffer(s)...
[ 780.804203] [drm] nouveau 0000:01:00.0: Evicting buffers...
[ 780.817629] i915 0000:00:02.0: power state changed by ACPI to D3
[ 780.818811] [drm] nouveau 0000:01:00.0: Idling channels...
[ 780.818918] [drm] nouveau 0000:01:00.0: Suspending GPU objects...
[ 781.017536] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
[ 781.038014] [drm] nouveau 0000:01:00.0: And we're gone!
[ 781.048804] nouveau 0000:01:00.0: power state changed by ACPI to D3
[ 781.049048] PM: suspend of devices complete after 658.847 msecs
[ 781.051298] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
[ 781.061543] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D3
[ 781.062247] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
[ 781.072540] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D3
[ 781.073173] PM: late suspend of devices complete after 24.125 msecs
[ 781.073913] ACPI: Preparing to enter system sleep state S3
[ 781.119604] PM: Saving platform NVS memory
[ 781.135454] Disabling non-boot CPUs ...
[ 781.137842] CPU 1 is now offline
[ 781.142204] CPU 2 is now offline
[ 781.146111] CPU 3 is now offline
[ 781.146113] lockdep: fixing up alternatives.
[ 781.146602] suspend debug: Waiting for 5 seconds.
[ 786.143612] sched: RT throttling activated
[ 786.157584] Enabling non-boot CPUs ...
[ 786.187784] lockdep: fixing up alternatives.
[ 786.187789] Booting Node 0 Processor 1 APIC 0x1
[ 786.187791] smpboot cpu 1: start_ip = 98000
[ 786.198818] Disabled fast string operations
[ 786.198837] Calibrating delay loop (skipped) already calibrated this CPU
[ 786.413560] NMI watchdog enabled, takes one hw-pmu counter.
[ 786.413968] ACPI Exception: AE_BAD_PARAMETER, Returned by Handler for [EmbeddedControl] (20120111/evregion-501)
[ 786.413977] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPC_.EC__.LPMD] (Node ffff88023286cc58), AE_BAD_PARAMETER (20120111/psparse-536)
[ 786.413992] ACPI Error: Method parse/execution failed [\_PR_.CPU0._PPC] (Node ffff8802328900f0), AE_BAD_PARAMETER (20120111/psparse-536)
[ 786.414004] ACPI Error: Method parse/execution failed [\_PR_.CPU1._PPC] (Node ffff880232890910), AE_BAD_PARAMETER (20120111/psparse-536)
[ 786.414021] ACPI Exception: AE_BAD_PARAMETER, Evaluating _PPC (20120111/processor_perflib-140)
[ 786.414511] ACPI Exception: AE_BAD_PARAMETER, Returned by Handler for [EmbeddedControl] (20120111/evregion-501)
[ 786.414519] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPC_.EC__.LPMD] (Node ffff88023286cc58), AE_BAD_PARAMETER (20120111/psparse-536)
[ 786.414533] ACPI Error: Method parse/execution failed [\_PR_.CPU0._PPC] (Node ffff8802328900f0), AE_BAD_PARAMETER (20120111/psparse-536)
[ 786.414547] ACPI Error: Method parse/execution failed [\_PR_.CPU1._PPC] (Node ffff880232890910), AE_BAD_PARAMETER (20120111/psparse-536)
[ 786.414565] ACPI Exception: AE_BAD_PARAMETER, Evaluating _PPC (20120111/processor_perflib-140)
[ 786.414601] CPU1 is up
[ 786.414784] lockdep: fixing up alternatives.
[ 786.414790] Booting Node 0 Processor 2 APIC 0x2
[ 786.414793] smpboot cpu 2: start_ip = 98000
[ 786.425827] Disabled fast string operations
[ 786.425846] Calibrating delay loop (skipped) already calibrated this CPU
[ 786.446749] NMI watchdog enabled, takes one hw-pmu counter.
[ 786.447159] ACPI Exception: AE_BAD_PARAMETER, Returned by Handler for [EmbeddedControl] (20120111/evregion-501)
[ 786.447168] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPC_.EC__.LPMD] (Node ffff88023286cc58), AE_BAD_PARAMETER (20120111/psparse-536)
[ 786.447183] ACPI Error: Method parse/execution failed [\_PR_.CPU0._PPC] (Node ffff8802328900f0), AE_BAD_PARAMETER (20120111/psparse-536)
[ 786.447194] ACPI Error: Method parse/execution failed [\_PR_.CPU2._PPC] (Node ffff880232890ac8), AE_BAD_PARAMETER (20120111/psparse-536)
[ 786.447212] ACPI Exception: AE_BAD_PARAMETER, Evaluating _PPC (20120111/processor_perflib-140)
[ 786.447570] ACPI Exception: AE_BAD_PARAMETER, Returned by Handler for [EmbeddedControl] (20120111/evregion-501)
[ 786.447576] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPC_.EC__.LPMD] (Node ffff88023286cc58), AE_BAD_PARAMETER (20120111/psparse-536)
[ 786.447586] ACPI Error: Method parse/execution failed [\_PR_.CPU0._PPC] (Node ffff8802328900f0), AE_BAD_PARAMETER (20120111/psparse-536)
[ 786.447594] ACPI Error: Method parse/execution failed [\_PR_.CPU2._PPC] (Node ffff880232890ac8), AE_BAD_PARAMETER (20120111/psparse-536)
[ 786.447605] ACPI Exception: AE_BAD_PARAMETER, Evaluating _PPC (20120111/processor_perflib-140)
[ 786.447631] CPU2 is up
[ 786.447757] lockdep: fixing up alternatives.
[ 786.447761] Booting Node 0 Processor 3 APIC 0x3
[ 786.447763] smpboot cpu 3: start_ip = 98000
[ 786.458790] Disabled fast string operations
[ 786.458810] Calibrating delay loop (skipped) already calibrated this CPU
[ 786.479664] NMI watchdog enabled, takes one hw-pmu counter.
[ 786.479987] ACPI Exception: AE_BAD_PARAMETER, Returned by Handler for [EmbeddedControl] (20120111/evregion-501)
[ 786.479993] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPC_.EC__.LPMD] (Node ffff88023286cc58), AE_BAD_PARAMETER (20120111/psparse-536)
[ 786.480003] ACPI Error: Method parse/execution failed [\_PR_.CPU0._PPC] (Node ffff8802328900f0), AE_BAD_PARAMETER (20120111/psparse-536)
[ 786.480010] ACPI Error: Method parse/execution failed [\_PR_.CPU3._PPC] (Node ffff880232890a28), AE_BAD_PARAMETER (20120111/psparse-536)
[ 786.480021] ACPI Exception: AE_BAD_PARAMETER, Evaluating _PPC (20120111/processor_perflib-140)
[ 786.480352] ACPI Exception: AE_BAD_PARAMETER, Returned by Handler for [EmbeddedControl] (20120111/evregion-501)
[ 786.480357] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPC_.EC__.LPMD] (Node ffff88023286cc58), AE_BAD_PARAMETER (20120111/psparse-536)
[ 786.480366] ACPI Error: Method parse/execution failed [\_PR_.CPU0._PPC] (Node ffff8802328900f0), AE_BAD_PARAMETER (20120111/psparse-536)
[ 786.480374] ACPI Error: Method parse/execution failed [\_PR_.CPU3._PPC] (Node ffff880232890a28), AE_BAD_PARAMETER (20120111/psparse-536)
[ 786.480385] ACPI Exception: AE_BAD_PARAMETER, Evaluating _PPC (20120111/processor_perflib-140)
[ 786.480410] CPU3 is up
[ 786.483786] ACPI: Waking up from system sleep state S3
[ 786.569882] i915 0000:00:02.0: power state changed by ACPI to D0
[ 786.580658] i915 0000:00:02.0: power state changed by ACPI to D0
[ 786.602728] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 786.613647] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 786.613729] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
[ 786.613739] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 786.613745] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 786.625038] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 786.635638] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 786.635720] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
[ 786.635729] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 786.635734] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 786.647039] nouveau 0000:01:00.0: power state changed by ACPI to D0
[ 786.657628] nouveau 0000:01:00.0: power state changed by ACPI to D0
[ 786.668781] sdhci-pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz.
[ 786.669062] PM: early resume of devices complete after 99.409 msecs
[ 786.669186] i915 0000:00:02.0: power state changed by ACPI to D0
[ 786.669195] i915 0000:00:02.0: power state changed by ACPI to D0
[ 786.669202] i915 0000:00:02.0: setting latency timer to 64
[ 786.669210] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
[ 786.669348] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[ 786.669774] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 786.669783] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 786.669799] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 786.669924] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[ 786.670024] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 786.670031] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 786.670044] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 786.670100] ahci 0000:00:1f.2: setting latency timer to 64
[ 786.670327] [drm] nouveau 0000:01:00.0: We're back, enabling device...
[ 786.670333] nouveau 0000:01:00.0: power state changed by ACPI to D0
[ 786.670340] nouveau 0000:01:00.0: power state changed by ACPI to D0
[ 786.670348] nouveau 0000:01:00.0: power state changed by ACPI to D0
[ 786.670355] nouveau 0000:01:00.0: power state changed by ACPI to D0
[ 786.670363] [drm] nouveau 0000:01:00.0: POSTing device...
[ 786.670366] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0x73B5
[ 786.690739] [drm] nouveau 0000:01:00.0: 0x7393: i2c wr fail: -5
[ 786.690892] [drm] nouveau 0000:01:00.0: 0x73A5: i2c rd fail: -5
[ 786.711427] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0x7A29
[ 786.717630] tpm_tis 00:0a: A TPM error (6) occurred attempting to read a pcr value
[ 786.717633] tpm_tis 00:0a: TPM is disabled/deactivated (0x6)
[ 786.718481] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0x89D9
[ 786.718483] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0x89DA
[ 786.718538] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0x8ACB
[ 786.718539] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0x8B30
[ 786.738553] [drm] nouveau 0000:01:00.0: Restoring GPU objects...
[ 786.773642] [drm] nouveau 0000:01:00.0: Reinitialising engines...
[ 786.773786] [drm] nouveau 0000:01:00.0: Restoring mode...
[ 786.985584] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 786.987582] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 786.988338] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 786.988348] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 786.988355] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 786.989589] ata5: SATA link down (SStatus 0 SControl 300)
[ 786.991596] ata4: SATA link down (SStatus 0 SControl 300)
[ 787.111651] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[ 787.111857] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[ 787.111865] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 787.116309] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[ 787.116554] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[ 787.116561] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 787.118059] ata2.00: configured for UDMA/66
[ 789.825152] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 789.825165] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 789.825174] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 789.826998] ata1.00: configured for UDMA/100
[ 789.827186] sd 0:0:0:0: [sda] Starting disk
[ 789.856776] PM: resume of devices complete after 3188.667 msecs
[ 790.001194] PM: Finishing wakeup.
[ 790.001196] Restarting tasks ... done.
[ 790.010857] video LNXVIDEO:00: Restoring backlight state
[ 790.016656] video LNXVIDEO:01: Restoring backlight state
[ 790.511508] e1000e: em1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
[ 790.511525] e1000e 0000:00:19.0: em1: 10/100 speed: disabling TSO>
>From what I can tell, these error messages are coming from this piece of
code:
drivers/acpi/processor_perflib.c:
static int acpi_processor_get_platform_limit(struct acpi_processor *pr)
{
...
/*
* _PPC indicates the maximum state currently supported by the platform
* (e.g. 0 = states 0..n; 1 = states 1..n; etc.
*/
status = acpi_evaluate_integer(pr->handle, "_PPC", NULL, &ppc);
if (status != AE_NOT_FOUND)
acpi_processor_ppc_status |= PPC_IN_USE;
if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
ACPI_EXCEPTION((AE_INFO, status, "Evaluating _PPC"));
return -ENODEV;
}
...
}
So I guess, with my patch this is being invoked twice, but I am not quite sure
how..
I mean, one path is acpi_cpu_soft_notify -> acpi_processor_ppc_has_changed()
-> acpi_processor_get_platform_limit().
I don't know what's the other path. I guess it is acpi_processor_notify() -> ...
Of course, the more important problem here is to find out what is going wrong
with processors level pm_test :-)
>
>> drivers/acpi/processor_driver.c | 6 ++++++
>> 1 files changed, 6 insertions(+), 0 deletions(-)
>>
>> diff --git a/drivers/acpi/processor_driver.c b/drivers/acpi/processor_driver.c
>> index 2801b41..3a87b13 100644
>> --- a/drivers/acpi/processor_driver.c
>> +++ b/drivers/acpi/processor_driver.c
>> @@ -422,6 +422,12 @@ static int acpi_cpu_soft_notify(struct notifier_block *nfb,
>> unsigned int cpu = (unsigned long)hcpu;
>> struct acpi_processor *pr = per_cpu(processors, cpu);
>>
>> + /*
>> + * Regular CPU hotplug, and CPU hotplug as part of the suspend/resume
>> + * sequence are really no different for us. So, let us handle both.
>> + */
>> + action &= ~CPU_TASKS_FROZEN;
>> +
>> if (action == CPU_ONLINE && pr) {
>> /* CPU got physically hotplugged and onlined the first time:
>> * Initialize missing things
>>
Regards,
Srivatsa S. Bhat
--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
