USB3 (and probably 2) was disabled at some point, but re-enabled when I flashed the bios and had to reconfigure everything. Both boot fast if no USB is connected. If I connect USB devices during boot, the crap EUFI bios takes conciderably longer than without. A complaint to asus on the newegg 'forums' and they said 'uefi is slow' (I dind't attribute that to the USB at that point). Booting 32bit kernel everything seems to work just fine. With and without USB devices connected. On a 64bit kernel, with USB devices connected, it boots at normal speed, but 'hangs' when USB is being initialized, which slows down boot to take minutes. So no, it doesn't boot slowly per say, just when USB inits and probes the bus, it waits for that/hangs. lsusb hangs long times too when devices are attached. What 2 dmesg logs would you like? 64bit with and without devices attached? I attach a USB device after the kernel booted, to spawn the same (iirc) error message as when it boots (which was included before). In any case I have attached a 64bit boot log with an USB stick connected, if that is what you ment. On 10/19/11 17:39, Bjorn Helgaas wrote: > On Wed, Oct 19, 2011 at 2:59 AM, Oliver Schinagl <oliver@xxxxxxxxxxx> wrote: >> >> I've updated the BIOS to the latest version supplied by the manufacturer and >> ran 2 new dmesges. I diffed them (stripped of timestamps) with the original >> ones. It did not solve or influence USB support on a 64bit kernel in any >> way. So still USB less on this specific board. >> >> I'd update the bugreport, but the bugzilla is still offline :( > > Sorry that this hasn't gone anywhere. I really miss the bugzilla to > keep track of things like this. > > I did notice from your previous dmesg logs that your 32-bit kernel > includes the xhci_hcd driver, but the 64-bit one does not. Is that > because you disabled USB 2 & 3 (sorry, I'm pretty USB-illiterate)? > > I didn't see any IRQ-related differences between your 32-bit and 64-bit logs. > > Let's back up to the beginning. The 64-bit Ubuntu kernel boots fine > with no USB devices, but extremely slowly when any USB devices are > attached, right? Can you collect those two dmesg logs? > > Bjorn
[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.38-8-generic (buildd@allspice) (gcc version 4.5.2 (Ubuntu/Linaro 4.5.2-8ubuntu3) ) #42-Ubuntu SMP Mon Apr 11 03:31:24 UTC 2011 (Ubuntu 2.6.38-8.42-generic 2.6.38.2) [ 0.000000] Command line: tasks=standard pkgsel/language-pack-patterns= pkgsel/install-language-support=true vga=normal initrd=/images/ubuntu/11.04/mini-iso/64bit/initrd.gz -- quiet BOOT_IMAGE=/images/ubuntu/11.04/mini-iso/64bit/linux [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d800 (usable) [ 0.000000] BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bd94e000 (usable) [ 0.000000] BIOS-e820: 00000000bd94e000 - 00000000bd99d000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bd99d000 - 00000000bd9a6000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bd9a6000 - 00000000bdade000 (reserved) [ 0.000000] BIOS-e820: 00000000bdade000 - 00000000bdaef000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bdaef000 - 00000000bdb02000 (reserved) [ 0.000000] BIOS-e820: 00000000bdb02000 - 00000000bdb04000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bdb04000 - 00000000bdb0d000 (reserved) [ 0.000000] BIOS-e820: 00000000bdb0d000 - 00000000bdb13000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bdb13000 - 00000000bdb75000 (reserved) [ 0.000000] BIOS-e820: 00000000bdb75000 - 00000000bdd78000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bdd78000 - 00000000bdf00000 (usable) [ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fec10000 - 00000000fec11000 (reserved) [ 0.000000] BIOS-e820: 00000000fec20000 - 00000000fec21000 (reserved) [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed01000 (reserved) [ 0.000000] BIOS-e820: 00000000fed61000 - 00000000fed71000 (reserved) [ 0.000000] BIOS-e820: 00000000fed80000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000fef00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100001000 - 0000000240000000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.7 present. [ 0.000000] DMI: To be filled by O.E.M. To be filled by O.E.M./M5A97, BIOS 0705 08/22/2011 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x240000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF write-through [ 0.000000] C0000-D0FFF write-protect [ 0.000000] D1000-EBFFF uncachable [ 0.000000] EC000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back [ 0.000000] 2 base 0000BDF00000 mask FFFFFFF00000 uncachable [ 0.000000] 3 base 0000BE000000 mask FFFFFE000000 uncachable [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000240000000 aka 9216M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000bdf00000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xbdf00 max_arch_pfn = 0x400000000 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: 0000000000000000-00000000bdf00000 [ 0.000000] 0000000000 - 0080000000 page 1G [ 0.000000] 0080000000 - 00bde00000 page 2M [ 0.000000] 00bde00000 - 00bdf00000 page 4k [ 0.000000] kernel direct mapping tables up to bdf00000 @ 1fffd000-20000000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000240000000 [ 0.000000] 0100000000 - 0240000000 page 1G [ 0.000000] kernel direct mapping tables up to 240000000 @ bdeff000-bdf00000 [ 0.000000] RAMDISK: 7f738000 - 80000000 [ 0.000000] ACPI: RSDP 00000000000f0450 00024 (v02 ALASKA) [ 0.000000] ACPI: XSDT 00000000bd99d068 0004C (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 00000000bd9a4038 000F4 (v04 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20110112/tbfadt-557) [ 0.000000] ACPI: DSDT 00000000bd99d140 06EF1 (v02 ALASKA A M I 00000000 INTL 20051117) [ 0.000000] ACPI: FACS 00000000bdb0df80 00040 [ 0.000000] ACPI: APIC 00000000bd9a4130 0009E (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: MCFG 00000000bd9a41d0 0003C (v01 ALASKA A M I 01072009 MSFT 00010013) [ 0.000000] ACPI: HPET 00000000bd9a4210 00038 (v01 ALASKA A M I 01072009 AMI 00000004) [ 0.000000] ACPI: SSDT 00000000bd9a4248 00E10 (v01 AMD POWERNOW 00000001 AMD 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000240000000 [ 0.000000] Initmem setup node 0 0000000000000000-0000000240000000 [ 0.000000] NODE_DATA [000000023fffb000 - 000000023fffffff] [ 0.000000] [ffffea0000000000-ffffea0007dfffff] PMD -> [ffff880237e00000-ffff88023edfffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00240000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[4] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009d [ 0.000000] 0: 0x00000100 -> 0x000bd94e [ 0.000000] 0: 0x000bdd78 -> 0x000bdf00 [ 0.000000] 0: 0x00100001 -> 0x00240000 [ 0.000000] On node 0 totalpages: 2087522 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 7 pages reserved [ 0.000000] DMA zone: 3918 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 758542 pages, LIFO batch:31 [ 0.000000] Normal zone: 17920 pages used for memmap [ 0.000000] Normal zone: 1292799 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x08] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x07] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 7, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec20000] gsi_base[24]) [ 0.000000] IOAPIC[1]: apic_id 8, version 33, address 0xfec20000, GSI 24-55 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000 [ 0.000000] SMP: Allowing 8 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 72 [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000bd94e000 - 00000000bd99d000 [ 0.000000] PM: Registered nosave memory: 00000000bd99d000 - 00000000bd9a6000 [ 0.000000] PM: Registered nosave memory: 00000000bd9a6000 - 00000000bdade000 [ 0.000000] PM: Registered nosave memory: 00000000bdade000 - 00000000bdaef000 [ 0.000000] PM: Registered nosave memory: 00000000bdaef000 - 00000000bdb02000 [ 0.000000] PM: Registered nosave memory: 00000000bdb02000 - 00000000bdb04000 [ 0.000000] PM: Registered nosave memory: 00000000bdb04000 - 00000000bdb0d000 [ 0.000000] PM: Registered nosave memory: 00000000bdb0d000 - 00000000bdb13000 [ 0.000000] PM: Registered nosave memory: 00000000bdb13000 - 00000000bdb75000 [ 0.000000] PM: Registered nosave memory: 00000000bdb75000 - 00000000bdd78000 [ 0.000000] PM: Registered nosave memory: 00000000bdf00000 - 00000000f8000000 [ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000 [ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000 [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fec10000 [ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fec11000 [ 0.000000] PM: Registered nosave memory: 00000000fec11000 - 00000000fec20000 [ 0.000000] PM: Registered nosave memory: 00000000fec20000 - 00000000fec21000 [ 0.000000] PM: Registered nosave memory: 00000000fec21000 - 00000000fed00000 [ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed01000 [ 0.000000] PM: Registered nosave memory: 00000000fed01000 - 00000000fed61000 [ 0.000000] PM: Registered nosave memory: 00000000fed61000 - 00000000fed71000 [ 0.000000] PM: Registered nosave memory: 00000000fed71000 - 00000000fed80000 [ 0.000000] PM: Registered nosave memory: 00000000fed80000 - 00000000fed90000 [ 0.000000] PM: Registered nosave memory: 00000000fed90000 - 00000000fef00000 [ 0.000000] PM: Registered nosave memory: 00000000fef00000 - 0000000100000000 [ 0.000000] PM: Registered nosave memory: 0000000100000000 - 0000000100001000 [ 0.000000] Allocating PCI resources starting at bdf00000 (gap: bdf00000:3a100000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff8800bd600000 s84416 r8192 d22080 u262144 [ 0.000000] pcpu-alloc: s84416 r8192 d22080 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2055259 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: tasks=standard pkgsel/language-pack-patterns= pkgsel/install-language-support=true vga=normal initrd=/images/ubuntu/11.04/mini-iso/64bit/initrd.gz -- quiet BOOT_IMAGE=/images/ubuntu/11.04/mini-iso/64bit/linux [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ f8000000 size 64 MB [ 0.000000] Memory: 8145936k/9437184k available (5940k kernel code, 1087096k absent, 204152k reserved, 5017k data, 956k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU-based detection of stalled CPUs is disabled. [ 0.000000] NR_IRQS:16640 nr_irqs:1288 16 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 83886080 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 3210.910 MHz processor. [ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 6421.82 BogoMIPS (lpj=32109100) [ 0.000006] pid_max: default: 32768 minimum: 301 [ 0.000022] Security Framework initialized [ 0.000032] AppArmor: AppArmor initialized [ 0.000033] Yama: becoming mindful. [ 0.000534] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.011172] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.012146] Mount-cache hash table entries: 256 [ 0.012239] Initializing cgroup subsys ns [ 0.012241] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup. [ 0.012243] Initializing cgroup subsys cpuacct [ 0.012246] Initializing cgroup subsys memory [ 0.012252] Initializing cgroup subsys devices [ 0.012254] Initializing cgroup subsys freezer [ 0.012255] Initializing cgroup subsys net_cls [ 0.012257] Initializing cgroup subsys blkio [ 0.012279] tseg: 00bdf00000 [ 0.012280] CPU: Physical Processor ID: 0 [ 0.012281] CPU: Processor Core ID: 0 [ 0.012283] mce: CPU supports 6 MCE banks [ 0.012290] using C1E aware idle routine [ 0.013370] ACPI: Core revision 20110112 [ 0.020016] ftrace: allocating 24314 entries in 96 pages [ 0.024746] Setting APIC routing to flat [ 0.025029] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.129837] CPU0: AMD Phenom(tm) II X6 1090T Processor stepping 00 [ 0.130000] Performance Events: AMD PMU driver. [ 0.130000] ... version: 0 [ 0.130000] ... bit width: 48 [ 0.130000] ... generic registers: 4 [ 0.130000] ... value mask: 0000ffffffffffff [ 0.130000] ... max period: 00007fffffffffff [ 0.130000] ... fixed-purpose events: 0 [ 0.130000] ... event mask: 000000000000000f [ 0.130000] Booting Node 0, Processors #1 [ 0.290011] System has AMD C1E enabled [ 0.290020] Switch to broadcast mode on CPU1 [ 0.290046] #2 [ 0.460014] Switch to broadcast mode on CPU2 [ 0.460052] #3 [ 0.630029] Switch to broadcast mode on CPU3 [ 0.630071] #4 [ 0.800026] Switch to broadcast mode on CPU4 [ 0.800075] #5 [ 0.970030] Brought up 6 CPUs [ 0.970040] Total of 6 processors activated (38529.81 BogoMIPS). [ 0.970026] Switch to broadcast mode on CPU5 [ 0.972958] Switch to broadcast mode on CPU0 [ 0.972958] devtmpfs: initialized [ 0.972958] print_constraints: dummy: [ 0.972958] Time: 22:58:29 Date: 10/19/11 [ 0.972958] NET: Registered protocol family 16 [ 0.972958] node 0 link 0: io port [d000, ffff] [ 0.972958] TOM: 00000000c0000000 aka 3072M [ 0.972958] Fam 10h mmconf [e0000000, efffffff] [ 0.972958] node 0 link 0: mmio [c0000000, fef0ffff] ==> [c0000000, dfffffff] and [f0000000, fef0ffff] [ 0.972958] TOM2: 0000000240000000 aka 9216M [ 0.972958] bus: [00, 1f] on node 0 link 0 [ 0.972958] bus: 00 index 0 [io 0x0000-0xffff] [ 0.972958] bus: 00 index 1 [mem 0xc0000000-0xdfffffff] [ 0.972958] bus: 00 index 2 [mem 0xf0000000-0xffffffff] [ 0.972958] bus: 00 index 3 [mem 0x240000000-0xfcffffffff] [ 0.972958] Extended Config Space enabled on 1 nodes [ 0.972958] ACPI: bus type pci registered [ 0.972958] Trying to unpack rootfs image as initramfs... [ 0.972958] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.972958] PCI: not using MMCONFIG [ 0.972958] PCI: Using configuration type 1 for base access [ 0.972958] PCI: Using configuration type 1 for extended access [ 0.972958] mtrr: your CPUs had inconsistent fixed MTRR settings [ 0.972958] mtrr: probably your BIOS does not setup all CPUs. [ 0.972958] mtrr: corrected configuration. [ 0.972958] bio: create slab <bio-0> at 0 [ 0.972958] ACPI: EC: Look up EC in DSDT [ 0.972958] ACPI: Executed 2 blocks of module-level executable AML code [ 1.070137] ACPI Error: [RAMB] Namespace lookup failure, AE_NOT_FOUND (20110112/psargs-359) [ 1.070145] ACPI Exception: AE_NOT_FOUND, Could not execute arguments for [RAMW] (Region) (20110112/nsinit-349) [ 1.070468] ACPI: Interpreter enabled [ 1.070471] ACPI: (supports S0 S1 S3 S4 S5) [ 1.070485] ACPI: Using IOAPIC for interrupt routing [ 1.070592] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 1.070617] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 1.092953] Freeing initrd memory: 8992k freed [ 1.131394] ACPI: EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62 [ 1.160081] ACPI: No dock devices found. [ 1.160083] HEST: Table not found. [ 1.160086] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 1.160212] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 1.160380] pci_root PNP0A03:00: host bridge window [io 0x0000-0x03af] [ 1.160382] pci_root PNP0A03:00: host bridge window [io 0x03e0-0x0cf7] [ 1.160383] pci_root PNP0A03:00: host bridge window [io 0x03b0-0x03df] [ 1.160385] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] [ 1.160386] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] [ 1.160388] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] [ 1.160389] pci_root PNP0A03:00: host bridge window [mem 0xc0000000-0xffffffff] [ 1.160401] pci 0000:00:00.0: [1002:5a14] type 0 class 0x000600 [ 1.160442] pci 0000:00:02.0: [1002:5a16] type 1 class 0x000604 [ 1.160465] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 1.160467] pci 0000:00:02.0: PME# disabled [ 1.160477] pci 0000:00:04.0: [1002:5a18] type 1 class 0x000604 [ 1.160497] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold [ 1.160498] pci 0000:00:04.0: PME# disabled [ 1.160509] pci 0000:00:07.0: [1002:5a1b] type 1 class 0x000604 [ 1.160528] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold [ 1.160530] pci 0000:00:07.0: PME# disabled [ 1.160551] pci 0000:00:11.0: [1002:4391] type 0 class 0x000106 [ 1.160564] pci 0000:00:11.0: reg 10: [io 0xf040-0xf047] [ 1.160571] pci 0000:00:11.0: reg 14: [io 0xf030-0xf033] [ 1.160578] pci 0000:00:11.0: reg 18: [io 0xf020-0xf027] [ 1.160584] pci 0000:00:11.0: reg 1c: [io 0xf010-0xf013] [ 1.160591] pci 0000:00:11.0: reg 20: [io 0xf000-0xf00f] [ 1.160598] pci 0000:00:11.0: reg 24: [mem 0xfeb0b000-0xfeb0b3ff] [ 1.160630] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03 [ 1.160639] pci 0000:00:12.0: reg 10: [mem 0xfeb0a000-0xfeb0afff] [ 1.160687] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03 [ 1.160700] pci 0000:00:12.2: reg 10: [mem 0xfeb09000-0xfeb090ff] [ 1.160748] pci 0000:00:12.2: supports D1 D2 [ 1.160750] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 1.160752] pci 0000:00:12.2: PME# disabled [ 1.160767] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03 [ 1.160776] pci 0000:00:13.0: reg 10: [mem 0xfeb08000-0xfeb08fff] [ 1.160825] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03 [ 1.160838] pci 0000:00:13.2: reg 10: [mem 0xfeb07000-0xfeb070ff] [ 1.160886] pci 0000:00:13.2: supports D1 D2 [ 1.160888] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 1.160890] pci 0000:00:13.2: PME# disabled [ 1.160904] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05 [ 1.160957] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403 [ 1.160972] pci 0000:00:14.2: reg 10: [mem 0xfeb00000-0xfeb03fff 64bit] [ 1.161012] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 1.161014] pci 0000:00:14.2: PME# disabled [ 1.161023] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601 [ 1.161075] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604 [ 1.161102] pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03 [ 1.161111] pci 0000:00:14.5: reg 10: [mem 0xfeb06000-0xfeb06fff] [ 1.161157] pci 0000:00:16.0: [1002:4397] type 0 class 0x000c03 [ 1.161166] pci 0000:00:16.0: reg 10: [mem 0xfeb05000-0xfeb05fff] [ 1.161214] pci 0000:00:16.2: [1002:4396] type 0 class 0x000c03 [ 1.161227] pci 0000:00:16.2: reg 10: [mem 0xfeb04000-0xfeb040ff] [ 1.161275] pci 0000:00:16.2: supports D1 D2 [ 1.161276] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot [ 1.161279] pci 0000:00:16.2: PME# disabled [ 1.161293] pci 0000:00:18.0: [1022:1200] type 0 class 0x000600 [ 1.161304] pci 0000:00:18.1: [1022:1201] type 0 class 0x000600 [ 1.161313] pci 0000:00:18.2: [1022:1202] type 0 class 0x000600 [ 1.161322] pci 0000:00:18.3: [1022:1203] type 0 class 0x000600 [ 1.161332] pci 0000:00:18.4: [1022:1204] type 0 class 0x000600 [ 1.161371] pci 0000:01:00.0: [1002:6758] type 0 class 0x000300 [ 1.161383] pci 0000:01:00.0: reg 10: [mem 0xc0000000-0xcfffffff 64bit pref] [ 1.161393] pci 0000:01:00.0: reg 18: [mem 0xfea20000-0xfea3ffff 64bit] [ 1.161400] pci 0000:01:00.0: reg 20: [io 0xe000-0xe0ff] [ 1.161412] pci 0000:01:00.0: reg 30: [mem 0xfea00000-0xfea1ffff pref] [ 1.161429] pci 0000:01:00.0: supports D1 D2 [ 1.161448] pci 0000:01:00.1: [1002:aa90] type 0 class 0x000403 [ 1.161460] pci 0000:01:00.1: reg 10: [mem 0xfea40000-0xfea43fff 64bit] [ 1.161503] pci 0000:01:00.1: supports D1 D2 [ 1.180022] pci 0000:00:02.0: PCI bridge to [bus 01-01] [ 1.180026] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] [ 1.180029] pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff] [ 1.180032] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref] [ 1.180064] pci 0000:02:00.0: [10ec:8168] type 0 class 0x000200 [ 1.180076] pci 0000:02:00.0: reg 10: [io 0xd000-0xd0ff] [ 1.180094] pci 0000:02:00.0: reg 18: [mem 0xd4004000-0xd4004fff 64bit pref] [ 1.180106] pci 0000:02:00.0: reg 20: [mem 0xd4000000-0xd4003fff 64bit pref] [ 1.180139] pci 0000:02:00.0: supports D1 D2 [ 1.180140] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.180143] pci 0000:02:00.0: PME# disabled [ 1.200021] pci 0000:00:04.0: PCI bridge to [bus 02-02] [ 1.200025] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff] [ 1.200027] pci 0000:00:04.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 1.200030] pci 0000:00:04.0: bridge window [mem 0xd4000000-0xd40fffff 64bit pref] [ 1.200069] pci 0000:03:00.0: [1b21:1042] type 0 class 0x000c03 [ 1.200086] pci 0000:03:00.0: reg 10: [mem 0xfe900000-0xfe907fff 64bit] [ 1.200156] pci 0000:03:00.0: PME# supported from D3hot D3cold [ 1.200159] pci 0000:03:00.0: PME# disabled [ 1.220020] pci 0000:00:07.0: PCI bridge to [bus 03-03] [ 1.220024] pci 0000:00:07.0: bridge window [io 0xfff000-0x0000] (disabled) [ 1.220027] pci 0000:00:07.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 1.220030] pci 0000:00:07.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 1.220057] pci 0000:04:05.0: [4444:0016] type 0 class 0x000400 [ 1.220075] pci 0000:04:05.0: reg 10: [mem 0xd0000000-0xd3ffffff pref] [ 1.220182] pci 0000:00:14.4: PCI bridge to [bus 04-04] (subtractive decode) [ 1.220185] pci 0000:00:14.4: bridge window [io 0xf000-0x0000] (disabled) [ 1.220188] pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 1.220191] pci 0000:00:14.4: bridge window [mem 0xd0000000-0xd3ffffff pref] [ 1.220193] pci 0000:00:14.4: bridge window [io 0x0000-0x03af] (subtractive decode) [ 1.220195] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7] (subtractive decode) [ 1.220197] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df] (subtractive decode) [ 1.220198] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 1.220200] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 1.220201] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode) [ 1.220203] pci 0000:00:14.4: bridge window [mem 0xc0000000-0xffffffff] (subtractive decode) [ 1.220215] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 1.220296] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT] [ 1.220349] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC02._PRT] [ 1.220365] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC04._PRT] [ 1.220384] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC07._PRT] [ 1.220404] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 1.223094] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 14 15) *0 [ 1.223132] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 14 15) *0 [ 1.223170] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 14 15) *0 [ 1.223206] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 10 11 14 15) *0 [ 1.223234] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 14 15) *0 [ 1.223256] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 14 15) *0 [ 1.223277] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 11 14 15) *0 [ 1.223299] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0 [ 1.223362] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 1.223364] vgaarb: loaded [ 1.223464] SCSI subsystem initialized [ 1.223483] libata version 3.00 loaded. [ 1.223483] usbcore: registered new interface driver usbfs [ 1.223483] usbcore: registered new interface driver hub [ 1.223483] usbcore: registered new device driver usb [ 1.223483] wmi: Mapper loaded [ 1.223483] PCI: Using ACPI for IRQ routing [ 1.223483] PCI: pci_cache_line_size set to 64 bytes [ 1.223483] reserve RAM buffer: 000000000009d800 - 000000000009ffff [ 1.223483] reserve RAM buffer: 00000000bd94e000 - 00000000bfffffff [ 1.223483] reserve RAM buffer: 00000000bdf00000 - 00000000bfffffff [ 1.223483] NetLabel: Initializing [ 1.223483] NetLabel: domain hash size = 128 [ 1.223483] NetLabel: protocols = UNLABELED CIPSOv4 [ 1.223483] NetLabel: unlabeled traffic allowed by default [ 1.223483] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 1.223483] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 1.223483] Switching to clocksource hpet [ 1.226249] AppArmor: AppArmor Filesystem Enabled [ 1.226269] pnp: PnP ACPI init [ 1.226285] ACPI: bus type pnp registered [ 1.226285] Switched to NOHz mode on CPU #0 [ 1.224027] Switched to NOHz mode on CPU #5 [ 1.224035] Switched to NOHz mode on CPU #1 [ 1.224039] Switched to NOHz mode on CPU #2 [ 1.224042] Switched to NOHz mode on CPU #3 [ 1.224046] Switched to NOHz mode on CPU #4 [ 1.226285] pnp 00:00: [bus 00-ff] [ 1.226285] pnp 00:00: [io 0x0cf8-0x0cff] [ 1.226285] pnp 00:00: [io 0x0000-0x03af window] [ 1.226285] pnp 00:00: [io 0x03e0-0x0cf7 window] [ 1.226285] pnp 00:00: [io 0x03b0-0x03df window] [ 1.226285] pnp 00:00: [io 0x0d00-0xffff window] [ 1.226285] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 1.226285] pnp 00:00: [mem 0x000c0000-0x000dffff window] [ 1.226285] pnp 00:00: [mem 0xc0000000-0xffffffff window] [ 1.226285] pnp 00:00: [mem 0x00000000 window] [ 1.226285] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) [ 1.226285] pnp 00:01: [mem 0xe0000000-0xefffffff] [ 1.226285] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved [ 1.226285] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active) [ 1.226285] pnp 00:02: [io 0x040b] [ 1.226285] pnp 00:02: [io 0x04d6] [ 1.226285] pnp 00:02: [io 0x0c00-0x0c01] [ 1.226285] pnp 00:02: [io 0x0c14] [ 1.226285] pnp 00:02: [io 0x0c50-0x0c51] [ 1.226285] pnp 00:02: [io 0x0c52] [ 1.226285] pnp 00:02: [io 0x0c6c] [ 1.226285] pnp 00:02: [io 0x0c6f] [ 1.226285] pnp 00:02: [io 0x0cd0-0x0cd1] [ 1.226285] pnp 00:02: [io 0x0cd2-0x0cd3] [ 1.226285] pnp 00:02: [io 0x0cd4-0x0cd5] [ 1.226285] pnp 00:02: [io 0x0cd6-0x0cd7] [ 1.226285] pnp 00:02: [io 0x0cd8-0x0cdf] [ 1.226285] pnp 00:02: [io 0x0800-0x089f] [ 1.226285] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled] [ 1.226285] pnp 00:02: [io 0x0000-0x000f] [ 1.226285] pnp 00:02: [io 0x0b20-0x0b3f] [ 1.226285] pnp 00:02: [io 0x0900-0x090f] [ 1.226285] pnp 00:02: [io 0x0910-0x091f] [ 1.226285] pnp 00:02: [io 0xfe00-0xfefe] [ 1.226285] pnp 00:02: [io 0x0060-0x005f disabled] [ 1.226285] pnp 00:02: [io 0x0064-0x0063 disabled] [ 1.226285] pnp 00:02: [mem 0xfec00000-0xfec00fff] [ 1.226285] pnp 00:02: [mem 0xfee00000-0xfee00fff] [ 1.226285] pnp 00:02: [mem 0xfed80000-0xfed8ffff] [ 1.226285] pnp 00:02: [mem 0xfed61000-0xfed70fff] [ 1.226285] pnp 00:02: [mem 0xfec10000-0xfec10fff] [ 1.226285] pnp 00:02: [mem 0xfed00000-0xfed00fff] [ 1.226285] pnp 00:02: [mem 0xffc00000-0xffffffff] [ 1.226285] system 00:02: [io 0x040b] has been reserved [ 1.226285] system 00:02: [io 0x04d6] has been reserved [ 1.226285] system 00:02: [io 0x0c00-0x0c01] has been reserved [ 1.226285] system 00:02: [io 0x0c14] has been reserved [ 1.226285] system 00:02: [io 0x0c50-0x0c51] has been reserved [ 1.226285] system 00:02: [io 0x0c52] has been reserved [ 1.226285] system 00:02: [io 0x0c6c] has been reserved [ 1.226285] system 00:02: [io 0x0c6f] has been reserved [ 1.226285] system 00:02: [io 0x0cd0-0x0cd1] has been reserved [ 1.226285] system 00:02: [io 0x0cd2-0x0cd3] has been reserved [ 1.226285] system 00:02: [io 0x0cd4-0x0cd5] has been reserved [ 1.226285] system 00:02: [io 0x0cd6-0x0cd7] has been reserved [ 1.226285] system 00:02: [io 0x0cd8-0x0cdf] has been reserved [ 1.226285] system 00:02: [io 0x0800-0x089f] has been reserved [ 1.226285] system 00:02: [io 0x0b20-0x0b3f] has been reserved [ 1.226285] system 00:02: [io 0x0900-0x090f] has been reserved [ 1.226285] system 00:02: [io 0x0910-0x091f] has been reserved [ 1.226285] system 00:02: [io 0xfe00-0xfefe] has been reserved [ 1.226285] system 00:02: [mem 0xfec00000-0xfec00fff] could not be reserved [ 1.226285] system 00:02: [mem 0xfee00000-0xfee00fff] has been reserved [ 1.226285] system 00:02: [mem 0xfed80000-0xfed8ffff] has been reserved [ 1.226285] system 00:02: [mem 0xfed61000-0xfed70fff] has been reserved [ 1.226285] system 00:02: [mem 0xfec10000-0xfec10fff] has been reserved [ 1.226285] system 00:02: [mem 0xfed00000-0xfed00fff] has been reserved [ 1.226285] system 00:02: [mem 0xffc00000-0xffffffff] has been reserved [ 1.226285] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.226285] pnp 00:03: [io 0x0000-0xffffffffffffffff disabled] [ 1.226285] pnp 00:03: [io 0x0290-0x02af] [ 1.226285] pnp 00:03: [io 0x0000-0xffffffffffffffff disabled] [ 1.226285] system 00:03: [io 0x0290-0x02af] has been reserved [ 1.226285] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.226285] pnp 00:04: [dma 4] [ 1.226285] pnp 00:04: [io 0x0000-0x000f] [ 1.226285] pnp 00:04: [io 0x0081-0x0083] [ 1.226285] pnp 00:04: [io 0x0087] [ 1.226285] pnp 00:04: [io 0x0089-0x008b] [ 1.226285] pnp 00:04: [io 0x008f] [ 1.226285] pnp 00:04: [io 0x00c0-0x00df] [ 1.226285] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active) [ 1.226285] pnp 00:05: [io 0x0070-0x0071] [ 1.226285] pnp 00:05: [irq 8] [ 1.226285] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) [ 1.226285] pnp 00:06: [io 0x0061] [ 1.226285] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active) [ 1.226285] pnp 00:07: [io 0x0010-0x001f] [ 1.226285] pnp 00:07: [io 0x0022-0x003f] [ 1.226285] pnp 00:07: [io 0x0044-0x005f] [ 1.226285] pnp 00:07: [io 0x0062-0x0063] [ 1.226285] pnp 00:07: [io 0x0065-0x006f] [ 1.226285] pnp 00:07: [io 0x0072-0x007f] [ 1.226285] pnp 00:07: [io 0x0080] [ 1.226285] pnp 00:07: [io 0x0084-0x0086] [ 1.226285] pnp 00:07: [io 0x0088] [ 1.226285] pnp 00:07: [io 0x008c-0x008e] [ 1.226285] pnp 00:07: [io 0x0090-0x009f] [ 1.226285] pnp 00:07: [io 0x00a2-0x00bf] [ 1.226285] pnp 00:07: [io 0x00e0-0x00ef] [ 1.226285] pnp 00:07: [io 0x04d0-0x04d1] [ 1.226285] system 00:07: [io 0x04d0-0x04d1] has been reserved [ 1.226285] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.226285] pnp 00:08: [io 0x00f0-0x00ff] [ 1.226285] pnp 00:08: [irq 13] [ 1.226285] pnp 00:08: Plug and Play ACPI device, IDs PNP0c04 (active) [ 1.226285] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.226285] pnp 00:0a: [io 0x0060] [ 1.226285] pnp 00:0a: [io 0x0064] [ 1.226285] pnp 00:0a: [irq 1] [ 1.226285] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [ 1.226285] pnp 00:0b: [irq 12] [ 1.226285] pnp 00:0b: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active) [ 1.226285] pnp 00:0c: [io 0x03f8-0x03ff] [ 1.226285] pnp 00:0c: [irq 4] [ 1.226285] pnp 00:0c: [dma 0 disabled] [ 1.226285] pnp 00:0c: Plug and Play ACPI device, IDs PNP0501 (active) [ 1.226285] pnp 00:0d: [mem 0x00000000-0xffffffffffffffff disabled] [ 1.226285] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.226285] pnp 00:0e: [mem 0x00000000-0xffffffffffffffff disabled] [ 1.226285] pnp 00:0e: [mem 0xfec20000-0xfec200ff] [ 1.226285] system 00:0e: [mem 0xfec20000-0xfec200ff] could not be reserved [ 1.226285] system 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.226285] pnp 00:0f: [mem 0xfed00000-0xfed003ff] [ 1.226285] pnp 00:0f: Plug and Play ACPI device, IDs PNP0103 (active) [ 1.226285] pnp: PnP ACPI: found 16 devices [ 1.226285] ACPI: ACPI bus type pnp unregistered [ 1.230825] pci 0000:00:02.0: PCI bridge to [bus 01-01] [ 1.230827] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] [ 1.230829] pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff] [ 1.230832] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref] [ 1.230834] pci 0000:00:04.0: PCI bridge to [bus 02-02] [ 1.230836] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff] [ 1.230838] pci 0000:00:04.0: bridge window [mem disabled] [ 1.230840] pci 0000:00:04.0: bridge window [mem 0xd4000000-0xd40fffff 64bit pref] [ 1.230842] pci 0000:00:07.0: PCI bridge to [bus 03-03] [ 1.230843] pci 0000:00:07.0: bridge window [io disabled] [ 1.230845] pci 0000:00:07.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 1.230847] pci 0000:00:07.0: bridge window [mem pref disabled] [ 1.230850] pci 0000:00:14.4: PCI bridge to [bus 04-04] [ 1.230851] pci 0000:00:14.4: bridge window [io disabled] [ 1.230854] pci 0000:00:14.4: bridge window [mem disabled] [ 1.230857] pci 0000:00:14.4: bridge window [mem 0xd0000000-0xd3ffffff pref] [ 1.230870] pci 0000:00:02.0: PCI INT A -> GSI 52 (level, low) -> IRQ 52 [ 1.230873] pci 0000:00:02.0: setting latency timer to 64 [ 1.230876] pci 0000:00:04.0: PCI INT A -> GSI 52 (level, low) -> IRQ 52 [ 1.230878] pci 0000:00:04.0: setting latency timer to 64 [ 1.230883] pci 0000:00:07.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53 [ 1.230885] pci 0000:00:07.0: setting latency timer to 64 [ 1.230890] pci_bus 0000:00: resource 4 [io 0x0000-0x03af] [ 1.230891] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7] [ 1.230892] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df] [ 1.230894] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff] [ 1.230895] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff] [ 1.230896] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff] [ 1.230898] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff] [ 1.230899] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 1.230900] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff] [ 1.230902] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref] [ 1.230904] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff] [ 1.230905] pci_bus 0000:02: resource 2 [mem 0xd4000000-0xd40fffff 64bit pref] [ 1.230906] pci_bus 0000:03: resource 1 [mem 0xfe900000-0xfe9fffff] [ 1.230908] pci_bus 0000:04: resource 2 [mem 0xd0000000-0xd3ffffff pref] [ 1.230909] pci_bus 0000:04: resource 4 [io 0x0000-0x03af] [ 1.230911] pci_bus 0000:04: resource 5 [io 0x03e0-0x0cf7] [ 1.230912] pci_bus 0000:04: resource 6 [io 0x03b0-0x03df] [ 1.230913] pci_bus 0000:04: resource 7 [io 0x0d00-0xffff] [ 1.230915] pci_bus 0000:04: resource 8 [mem 0x000a0000-0x000bffff] [ 1.230916] pci_bus 0000:04: resource 9 [mem 0x000c0000-0x000dffff] [ 1.230917] pci_bus 0000:04: resource 10 [mem 0xc0000000-0xffffffff] [ 1.230940] NET: Registered protocol family 2 [ 1.231088] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 1.232084] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 1.234128] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.234379] TCP: Hash tables configured (established 524288 bind 65536) [ 1.234380] TCP reno registered [ 1.234391] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 1.234435] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 1.234546] NET: Registered protocol family 1 [ 45.030150] pci 0000:01:00.0: Boot video device [ 45.030186] PCI: CLS 64 bytes, default 64 [ 45.031340] PCI-DMA: Disabling AGP. [ 45.033564] PCI-DMA: aperture base @ f8000000 size 65536 KB [ 45.033566] init_memory_mapping: 00000000f8000000-00000000fc000000 [ 45.033568] 00f8000000 - 00fc000000 page 2M [ 45.033573] PCI-DMA: using GART IOMMU. [ 45.033575] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 45.036780] audit: initializing netlink socket (disabled) [ 45.036793] type=2000 audit(1319065153.030:1): initialized [ 45.045063] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 45.046169] VFS: Disk quotas dquot_6.5.2 [ 45.046199] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 45.046616] fuse init (API version 7.16) [ 45.046664] msgmni has been set to 16056 [ 45.046884] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 45.046911] io scheduler noop registered [ 45.046912] io scheduler deadline registered [ 45.046935] io scheduler cfq registered (default) [ 45.047185] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 45.047200] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 45.047291] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 45.190097] ACPI: Power Button [PWRB] [ 45.190145] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 45.190148] ACPI: Power Button [PWRF] [ 45.190261] ACPI: acpi_idle registered with cpuidle [ 45.190291] ACPI: processor limited to max C-state 1 [ 45.330573] ERST: Table is not found! [ 45.330620] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 45.351118] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 45.580704] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 45.580932] Linux agpgart interface v0.103 [ 45.581570] brd: module loaded [ 45.581836] loop: module loaded [ 45.581888] i2c-core: driver [adp5520] using legacy suspend method [ 45.581889] i2c-core: driver [adp5520] using legacy resume method [ 45.582103] Fixed MDIO Bus: probed [ 45.582120] PPP generic driver version 2.4.2 [ 45.582139] tun: Universal TUN/TAP device driver, 1.6 [ 45.582140] tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx> [ 45.582187] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 45.582274] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 45.582319] ehci_hcd 0000:00:12.2: EHCI Host Controller [ 45.582341] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 45.582361] ehci_hcd 0000:00:12.2: QUIRK: Enable exception for AMD Hudson ASPM [ 45.582363] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 45.582380] ehci_hcd 0000:00:12.2: debug port 1 [ 45.582396] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfeb09000 [ 45.600082] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 45.600165] hub 1-0:1.0: USB hub found [ 45.600168] hub 1-0:1.0: 5 ports detected [ 45.600303] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 45.600313] ehci_hcd 0000:00:13.2: EHCI Host Controller [ 45.600338] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 45.600367] ehci_hcd 0000:00:13.2: QUIRK: Enable exception for AMD Hudson ASPM [ 45.600369] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 45.600384] ehci_hcd 0000:00:13.2: debug port 1 [ 45.600400] ehci_hcd 0000:00:13.2: irq 21, io mem 0xfeb07000 [ 45.620081] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 45.620156] hub 2-0:1.0: USB hub found [ 45.620167] hub 2-0:1.0: 5 ports detected [ 45.620309] ehci_hcd 0000:00:16.2: PCI INT B -> GSI 23 (level, low) -> IRQ 23 [ 45.620319] ehci_hcd 0000:00:16.2: EHCI Host Controller [ 45.620346] ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 3 [ 45.620373] ehci_hcd 0000:00:16.2: QUIRK: Enable exception for AMD Hudson ASPM [ 45.620376] ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 45.620390] ehci_hcd 0000:00:16.2: debug port 1 [ 45.620405] ehci_hcd 0000:00:16.2: irq 23, io mem 0xfeb04000 [ 45.640080] ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00 [ 45.640155] hub 3-0:1.0: USB hub found [ 45.640166] hub 3-0:1.0: 4 ports detected [ 45.640234] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 45.640319] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 45.640330] ohci_hcd 0000:00:12.0: OHCI Host Controller [ 45.640354] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4 [ 45.640392] ohci_hcd 0000:00:12.0: irq 18, io mem 0xfeb0a000 [ 45.704170] hub 4-0:1.0: USB hub found [ 45.704175] hub 4-0:1.0: 5 ports detected [ 45.704334] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 45.704344] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 45.704370] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 45.704405] ohci_hcd 0000:00:13.0: irq 20, io mem 0xfeb08000 [ 45.764150] hub 5-0:1.0: USB hub found [ 45.764155] hub 5-0:1.0: 5 ports detected [ 45.764306] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 45.764316] ohci_hcd 0000:00:14.5: OHCI Host Controller [ 45.764344] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 6 [ 45.764374] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfeb06000 [ 45.824150] hub 6-0:1.0: USB hub found [ 45.824155] hub 6-0:1.0: 2 ports detected [ 45.824308] ohci_hcd 0000:00:16.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 45.824318] ohci_hcd 0000:00:16.0: OHCI Host Controller [ 45.824342] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 7 [ 45.824378] ohci_hcd 0000:00:16.0: irq 22, io mem 0xfeb05000 [ 45.884151] hub 7-0:1.0: USB hub found [ 45.884155] hub 7-0:1.0: 4 ports detected [ 45.884235] uhci_hcd: USB Universal Host Controller Interface driver [ 45.960105] usb 3-2: new high speed USB device using ehci_hcd and address 2 [ 45.970122] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 45.970528] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 45.970533] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 45.970647] mousedev: PS/2 mouse device common for all mice [ 45.970717] rtc_cmos 00:05: RTC can wake from S4 [ 45.992065] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 [ 46.030120] Refined TSC clocksource calibration: 3210.783 MHz. [ 46.030123] Switching to clocksource tsc [ 46.060107] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 46.060126] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 46.060196] device-mapper: uevent: version 1.0.3 [ 46.060239] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@xxxxxxxxxx [ 46.060326] device-mapper: multipath: version 1.2.0 loaded [ 46.060327] device-mapper: multipath round-robin: version 1.0.0 loaded [ 46.060406] cpuidle: using governor ladder [ 46.060407] cpuidle: using governor menu [ 46.060572] TCP cubic registered [ 46.060639] NET: Registered protocol family 10 [ 46.060938] NET: Registered protocol family 17 [ 46.060947] Registering the dns_resolver key type [ 46.061024] powernow-k8: Found 1 AMD Phenom(tm) II X6 1090T Processor (6 cpu cores) (version 2.20.00) [ 46.061031] powernow-k8: Core Performance Boosting: on. [ 46.061062] powernow-k8: 0 : pstate 0 (3200 MHz) [ 46.061064] powernow-k8: 1 : pstate 1 (2400 MHz) [ 46.061065] powernow-k8: 2 : pstate 2 (1600 MHz) [ 46.061066] powernow-k8: 3 : pstate 3 (800 MHz) [ 46.061483] PM: Hibernation image not present or could not be loaded. [ 46.061489] registered taskstats version 1 [ 46.061686] Magic number: 15:230:1008 [ 46.061784] rtc_cmos 00:05: setting system clock to 2011-10-19 22:59:14 UTC (1319065154) [ 46.061786] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 46.061788] EDD information not available. [ 46.062878] Freeing unused kernel memory: 956k freed [ 46.063061] Write protecting the kernel read-only data: 10240k [ 46.063663] Freeing unused kernel memory: 184k freed [ 46.066821] Freeing unused kernel memory: 1444k freed [ 46.086442] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 46.086467] r8169 0000:02:00.0: PCI INT A -> GSI 44 (level, low) -> IRQ 44 [ 46.086508] r8169 0000:02:00.0: setting latency timer to 64 [ 46.086514] r8169 0000:02:00.0: (unregistered net_device): unknown MAC, using family default [ 46.086565] r8169 0000:02:00.0: irq 72 for MSI/MSI-X [ 46.086924] r8169 0000:02:00.0: eth0: RTL8168b/8111b at 0xffffc90011794000, 14:da:e9:03:e9:b7, XID 0c900880 IRQ 72 [ 46.090027] usb 3-2: device descriptor read/64, error -32 [ 46.350070] usb 3-2: device descriptor read/64, error -32 [ 46.512221] vga16fb: initializing [ 46.512224] vga16fb: mapped to 0xffff8800000a0000 [ 46.600058] usb 3-2: new high speed USB device using ehci_hcd and address 3 [ 46.697472] Console: switching to colour frame buffer device 80x30 [ 46.699822] fb0: VGA16 VGA frame buffer device [ 46.720068] usb 3-2: device descriptor read/64, error -32 [ 46.980067] usb 3-2: device descriptor read/64, error -32 [ 47.220066] usb 3-2: new high speed USB device using ehci_hcd and address 4 [ 47.640037] usb 3-2: device not accepting address 4, error -32 [ 47.760074] usb 3-2: new high speed USB device using ehci_hcd and address 5 [ 48.180069] usb 3-2: device not accepting address 5, error -32 [ 48.180080] hub 3-0:1.0: unable to enumerate USB device on port 2 [ 48.510068] usb 7-2: new full speed USB device using ohci_hcd and address 2 [ 48.660069] usb 7-2: device descriptor read/64, error -32 [ 48.920073] usb 7-2: device descriptor read/64, error -32 [ 49.180067] usb 7-2: new full speed USB device using ohci_hcd and address 3 [ 49.330069] usb 7-2: device descriptor read/64, error -32 [ 49.590069] usb 7-2: device descriptor read/64, error -32 [ 49.850084] usb 7-2: new full speed USB device using ohci_hcd and address 4 [ 50.270067] usb 7-2: device not accepting address 4, error -32 [ 50.420069] usb 7-2: new full speed USB device using ohci_hcd and address 5 [ 50.840070] usb 7-2: device not accepting address 5, error -32 [ 50.840092] hub 7-0:1.0: unable to enumerate USB device on port 2 [ 149.696050] Initializing USB Mass Storage driver... [ 149.696086] usbcore: registered new interface driver usb-storage [ 149.696088] USB Mass Storage support registered. [ 150.970777] r8169 0000:02:00.0: eth0: link down [ 150.970786] r8169 0000:02:00.0: eth0: link down [ 150.971452] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 152.100673] r8169 0000:02:00.0: eth0: link down [ 152.101253] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 154.889173] r8169 0000:02:00.0: eth0: link up [ 154.889770] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 191.670144] r8169 0000:02:00.0: PCI INT A disabled [ 203.972006] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 203.972020] r8169 0000:02:00.0: PCI INT A -> GSI 44 (level, low) -> IRQ 44 [ 203.972054] r8169 0000:02:00.0: setting latency timer to 64 [ 203.972059] r8169 0000:02:00.0: (unregistered net_device): unknown MAC, using family default [ 203.972112] r8169 0000:02:00.0: irq 72 for MSI/MSI-X [ 203.972441] r8169 0000:02:00.0: eth0: RTL8168b/8111b at 0xffffc90011794000, 14:da:e9:03:e9:b7, XID 0c900800 IRQ 72 [ 221.440619] r8169 0000:02:00.0: eth0: link down [ 221.440640] r8169 0000:02:00.0: eth0: link down [ 221.441259] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 224.711883] r8169 0000:02:00.0: eth0: link up [ 224.712427] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 272.011168] ahci 0000:00:11.0: version 3.0 [ 272.011196] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 272.011498] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 272.011501] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part [ 272.012471] scsi0 : ahci [ 272.012594] scsi1 : ahci [ 272.012669] scsi2 : ahci [ 272.012721] scsi3 : ahci [ 272.012911] scsi4 : ahci [ 272.012974] scsi5 : ahci [ 272.013288] ata1: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b100 irq 19 [ 272.013291] ata2: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b180 irq 19 [ 272.013294] ata3: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b200 irq 19 [ 272.013299] ata4: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b280 irq 19 [ 272.013303] ata5: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b300 irq 19 [ 272.013309] ata6: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b380 irq 19 [ 272.360136] ata4: SATA link down (SStatus 0 SControl 300) [ 272.370099] ata3: SATA link down (SStatus 0 SControl 300) [ 272.370124] ata5: SATA link down (SStatus 0 SControl 300) [ 272.370147] ata6: SATA link down (SStatus 0 SControl 300) [ 272.560097] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 272.560117] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 272.566543] ata1.00: ATA-8: WDC WD3000HLFS-01G6U4, 04.04V06, max UDMA/133 [ 272.566546] ata1.00: 586072368 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 272.567353] ata2.00: ATA-8: WDC WD3000HLFS-01G6U4, 04.04V06, max UDMA/133 [ 272.567355] ata2.00: 586072368 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 272.572489] ata1.00: configured for UDMA/133 [ 272.572618] scsi 0:0:0:0: Direct-Access ATA WDC WD3000HLFS-0 04.0 PQ: 0 ANSI: 5 [ 272.572759] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 272.572830] sd 0:0:0:0: [sda] 586072368 512-byte logical blocks: (300 GB/279 GiB) [ 272.572894] sd 0:0:0:0: [sda] Write Protect is off [ 272.572897] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 272.572921] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 272.575362] ata2.00: configured for UDMA/133 [ 272.575486] scsi 1:0:0:0: Direct-Access ATA WDC WD3000HLFS-0 04.0 PQ: 0 ANSI: 5 [ 272.575600] sd 1:0:0:0: [sdb] 586072368 512-byte logical blocks: (300 GB/279 GiB) [ 272.575602] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 272.575694] sd 1:0:0:0: [sdb] Write Protect is off [ 272.575696] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 272.575727] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 272.595234] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 [ 272.595595] sd 0:0:0:0: [sda] Attached SCSI disk [ 272.597376] sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7 [ 272.597734] sd 1:0:0:0: [sdb] Attached SCSI disk [ 275.818495] NTFS driver 2.1.30 [Flags: R/O MODULE]. [ 275.829847] Btrfs loaded [ 275.841863] JFS: nTxBlock = 8192, nTxLock = 65536 [ 275.862474] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled [ 275.863098] SGI XFS Quota Management subsystem [ 275.940243] md: md0 stopped. [ 275.940729] md: bind<sdb3> [ 275.940810] md: bind<sda3> [ 275.942585] md: raid1 personality registered for level 1 [ 275.942773] bio: create slab <bio-1> at 1 [ 275.942829] md/raid1:md0: active with 2 out of 2 mirrors [ 275.942847] md0: detected capacity change from 0 to 1090453504 [ 275.950911] md0: unknown partition table [ 275.963463] md: md127 stopped. [ 275.963930] md: bind<sdb4> [ 275.964046] md: bind<sda4> [ 275.965800] md: raid10 personality registered for level 10 [ 275.966009] md/raid10:md127: active with 2 out of 2 devices [ 275.966023] md127: detected capacity change from 0 to 17453285376 [ 275.978368] md127: unknown partition table [ 276.174137] md: md126 stopped. [ 276.174539] md: bind<sdb5> [ 276.174631] md: bind<sda5> [ 276.175355] md/raid10:md126: active with 2 out of 2 devices [ 276.175370] md126: detected capacity change from 0 to 34907881472 [ 276.179944] md126: unknown partition table [ 276.409786] md: md125 stopped. [ 276.410215] md: bind<sdb6> [ 276.410307] md: bind<sda6> [ 276.411010] md/raid10:md125: active with 2 out of 2 devices [ 276.411025] md125: detected capacity change from 0 to 233556410368 [ 276.430393] md125: unknown partition table [ 279.228395] EXT3-fs (md0): error: couldn't mount because of unsupported optional features (240) [ 279.276292] EXT2-fs (md0): error: couldn't mount because of unsupported optional features (240) [ 279.334074] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null) [ 279.426280] EXT3-fs (md125): error: couldn't mount because of unsupported optional features (240) [ 279.500256] EXT2-fs (md125): error: couldn't mount because of unsupported optional features (240) [ 279.590385] EXT4-fs (md125): mounted filesystem with ordered data mode. Opts: (null) [ 279.666854] EXT3-fs (md126): error: couldn't mount because of unsupported optional features (240) [ 279.710260] EXT2-fs (md126): error: couldn't mount because of unsupported optional features (240) [ 279.801340] EXT4-fs (md126): mounted filesystem with ordered data mode. Opts: (null) [ 279.884298] EXT3-fs (md127): error: couldn't mount because of unsupported optional features (240) [ 279.960257] EXT2-fs (md127): error: couldn't mount because of unsupported optional features (240) [ 280.021742] EXT4-fs (md127): mounted filesystem with ordered data mode. Opts: (null) [ 280.113467] EXT3-fs (sda2): error: couldn't mount because of unsupported optional features (240) [ 280.190257] EXT2-fs (sda2): error: couldn't mount because of unsupported optional features (240) [ 280.247599] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 280.584312] EXT3-fs (md0): error: couldn't mount because of unsupported optional features (240) [ 280.630286] EXT2-fs (md0): error: couldn't mount because of unsupported optional features (240) [ 280.714121] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null) [ 280.828438] EXT3-fs (md125): error: couldn't mount because of unsupported optional features (240) [ 280.900288] EXT2-fs (md125): error: couldn't mount because of unsupported optional features (240) [ 280.970366] EXT4-fs (md125): mounted filesystem with ordered data mode. Opts: (null) [ 281.063846] EXT3-fs (md126): error: couldn't mount because of unsupported optional features (240) [ 281.140288] EXT2-fs (md126): error: couldn't mount because of unsupported optional features (240) [ 281.205377] EXT4-fs (md126): mounted filesystem with ordered data mode. Opts: (null) [ 281.301299] EXT3-fs (md127): error: couldn't mount because of unsupported optional features (240) [ 281.371613] EXT2-fs (md127): error: couldn't mount because of unsupported optional features (240) [ 281.461795] EXT4-fs (md127): mounted filesystem with ordered data mode. Opts: (null) [ 281.574335] EXT3-fs (sda2): error: couldn't mount because of unsupported optional features (240) [ 281.653621] EXT2-fs (sda2): error: couldn't mount because of unsupported optional features (240) [ 281.735649] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 282.180088] usb 7-2: new full speed USB device using ohci_hcd and address 6 [ 282.330067] usb 7-2: device descriptor read/64, error -32 [ 282.590067] usb 7-2: device descriptor read/64, error -32 [ 282.870070] usb 7-2: new full speed USB device using ohci_hcd and address 7 [ 283.020071] usb 7-2: device descriptor read/64, error -32 [ 283.280068] usb 7-2: device descriptor read/64, error -32 [ 283.560067] usb 7-2: new full speed USB device using ohci_hcd and address 8 [ 283.980071] usb 7-2: device not accepting address 8, error -32 [ 284.150067] usb 7-2: new full speed USB device using ohci_hcd and address 9 [ 284.570068] usb 7-2: device not accepting address 9, error -32 [ 284.570090] hub 7-0:1.0: unable to enumerate USB device on port 2 [ 446.229665] EXT3-fs (md125): error: couldn't mount because of unsupported optional features (240) [ 446.300301] EXT2-fs (md125): error: couldn't mount because of unsupported optional features (240) [ 446.365875] EXT4-fs (md125): mounted filesystem with ordered data mode. Opts:
