I've updated the BIOS to the latest version supplied by the manufacturer and ran 2 new dmesges. I diffed them (stripped of timestamps) with the original ones. It did not solve or influence USB support on a 64bit kernel in any way. So still USB less on this specific board.
I'd update the bugreport, but the bugzilla is still offline :(
--- dmesg64.v1 2011-10-18 19:30:12.968540175 +0200 +++ dmesg64.v2 2011-10-18 19:30:22.620418836 +0200 @@ -6,18 +6,18 @@ BIOS-e820: 0000000000000000 - 000000000009d800 (usable) BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) - BIOS-e820: 0000000000100000 - 00000000bd94d000 (usable) - BIOS-e820: 00000000bd94d000 - 00000000bd99c000 (ACPI NVS) - BIOS-e820: 00000000bd99c000 - 00000000bd9a4000 (ACPI data) - BIOS-e820: 00000000bd9a4000 - 00000000bdadc000 (reserved) - BIOS-e820: 00000000bdadc000 - 00000000bdaed000 (ACPI NVS) - BIOS-e820: 00000000bdaed000 - 00000000bdb00000 (reserved) - BIOS-e820: 00000000bdb00000 - 00000000bdb02000 (ACPI NVS) - BIOS-e820: 00000000bdb02000 - 00000000bdb0b000 (reserved) - BIOS-e820: 00000000bdb0b000 - 00000000bdb11000 (ACPI NVS) - BIOS-e820: 00000000bdb11000 - 00000000bdb70000 (reserved) - BIOS-e820: 00000000bdb70000 - 00000000bdd73000 (ACPI NVS) - BIOS-e820: 00000000bdd73000 - 00000000bdf00000 (usable) + BIOS-e820: 0000000000100000 - 00000000bd94e000 (usable) + BIOS-e820: 00000000bd94e000 - 00000000bd99d000 (ACPI NVS) + BIOS-e820: 00000000bd99d000 - 00000000bd9a6000 (ACPI data) + BIOS-e820: 00000000bd9a6000 - 00000000bdade000 (reserved) + BIOS-e820: 00000000bdade000 - 00000000bdaef000 (ACPI NVS) + BIOS-e820: 00000000bdaef000 - 00000000bdb02000 (reserved) + BIOS-e820: 00000000bdb02000 - 00000000bdb04000 (ACPI NVS) + BIOS-e820: 00000000bdb04000 - 00000000bdb0d000 (reserved) + BIOS-e820: 00000000bdb0d000 - 00000000bdb13000 (ACPI NVS) + BIOS-e820: 00000000bdb13000 - 00000000bdb75000 (reserved) + BIOS-e820: 00000000bdb75000 - 00000000bdd78000 (ACPI NVS) + BIOS-e820: 00000000bdd78000 - 00000000bdf00000 (usable) BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fec10000 - 00000000fec11000 (reserved) @@ -29,7 +29,7 @@ BIOS-e820: 0000000100001000 - 0000000240000000 (usable) NX (Execute Disable) protection: active DMI 2.7 present. - DMI: To be filled by O.E.M. To be filled by O.E.M./M5A97, BIOS 0503 05/30/2011 + DMI: To be filled by O.E.M. To be filled by O.E.M./M5A97, BIOS 0705 08/22/2011 e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) e820 remove range: 00000000000a0000 - 0000000000100000 (usable) No AGP bridge found @@ -42,10 +42,10 @@ D1000-EBFFF uncachable EC000-FFFFF write-protect MTRR variable ranges enabled: - 0 base 000000000000 mask FFFF00000000 write-back - 1 base 0000BDF00000 mask FFFFFFF00000 uncachable - 2 base 0000BE000000 mask FFFFFE000000 uncachable - 3 base 0000C0000000 mask FFFFC0000000 uncachable + 0 base 000000000000 mask FFFF80000000 write-back + 1 base 000080000000 mask FFFFC0000000 write-back + 2 base 0000BDF00000 mask FFFFFFF00000 uncachable + 3 base 0000BE000000 mask FFFFFE000000 uncachable 4 disabled 5 disabled 6 disabled @@ -66,15 +66,15 @@ kernel direct mapping tables up to 240000000 @ bdeff000-bdf00000 RAMDISK: 7f738000 - 80000000 ACPI: RSDP 00000000000f0450 00024 (v02 ALASKA) - ACPI: XSDT 00000000bd99c068 0004C (v01 ALASKA A M I 01072009 AMI 00010013) - ACPI: FACP 00000000bd9a2a68 000F4 (v04 ALASKA A M I 01072009 AMI 00010013) + ACPI: XSDT 00000000bd99d068 0004C (v01 ALASKA A M I 01072009 AMI 00010013) + ACPI: FACP 00000000bd9a4038 000F4 (v04 ALASKA A M I 01072009 AMI 00010013) ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20110112/tbfadt-557) - ACPI: DSDT 00000000bd99c140 06924 (v02 ALASKA A M I 00000000 INTL 20051117) - ACPI: FACS 00000000bdb0bf80 00040 - ACPI: APIC 00000000bd9a2b60 0009E (v03 ALASKA A M I 01072009 AMI 00010013) - ACPI: MCFG 00000000bd9a2c00 0003C (v01 ALASKA A M I 01072009 MSFT 00010013) - ACPI: HPET 00000000bd9a2c40 00038 (v01 ALASKA A M I 01072009 AMI 00000004) - ACPI: SSDT 00000000bd9a2c78 00DDA (v01 AMD POWERNOW 00000001 AMD 00000001) + ACPI: DSDT 00000000bd99d140 06EF1 (v02 ALASKA A M I 00000000 INTL 20051117) + ACPI: FACS 00000000bdb0df80 00040 + ACPI: APIC 00000000bd9a4130 0009E (v03 ALASKA A M I 01072009 AMI 00010013) + ACPI: MCFG 00000000bd9a41d0 0003C (v01 ALASKA A M I 01072009 MSFT 00010013) + ACPI: HPET 00000000bd9a4210 00038 (v01 ALASKA A M I 01072009 AMI 00000004) + ACPI: SSDT 00000000bd9a4248 00E10 (v01 AMD POWERNOW 00000001 AMD 00000001) ACPI: Local APIC address 0xfee00000 Scanning NUMA topology in Northbridge 24 No NUMA configuration found @@ -89,15 +89,15 @@ Movable zone start PFN for each node early_node_map[4] active PFN ranges 0: 0x00000010 -> 0x0000009d - 0: 0x00000100 -> 0x000bd94d - 0: 0x000bdd73 -> 0x000bdf00 + 0: 0x00000100 -> 0x000bd94e + 0: 0x000bdd78 -> 0x000bdf00 0: 0x00100001 -> 0x00240000 - On node 0 totalpages: 2087526 + On node 0 totalpages: 2087522 DMA zone: 56 pages used for memmap DMA zone: 7 pages reserved DMA zone: 3918 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap - DMA32 zone: 758546 pages, LIFO batch:31 + DMA32 zone: 758542 pages, LIFO batch:31 Normal zone: 17920 pages used for memmap Normal zone: 1292799 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x808 @@ -128,16 +128,16 @@ PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 - PM: Registered nosave memory: 00000000bd94d000 - 00000000bd99c000 - PM: Registered nosave memory: 00000000bd99c000 - 00000000bd9a4000 - PM: Registered nosave memory: 00000000bd9a4000 - 00000000bdadc000 - PM: Registered nosave memory: 00000000bdadc000 - 00000000bdaed000 - PM: Registered nosave memory: 00000000bdaed000 - 00000000bdb00000 - PM: Registered nosave memory: 00000000bdb00000 - 00000000bdb02000 - PM: Registered nosave memory: 00000000bdb02000 - 00000000bdb0b000 - PM: Registered nosave memory: 00000000bdb0b000 - 00000000bdb11000 - PM: Registered nosave memory: 00000000bdb11000 - 00000000bdb70000 - PM: Registered nosave memory: 00000000bdb70000 - 00000000bdd73000 + PM: Registered nosave memory: 00000000bd94e000 - 00000000bd99d000 + PM: Registered nosave memory: 00000000bd99d000 - 00000000bd9a6000 + PM: Registered nosave memory: 00000000bd9a6000 - 00000000bdade000 + PM: Registered nosave memory: 00000000bdade000 - 00000000bdaef000 + PM: Registered nosave memory: 00000000bdaef000 - 00000000bdb02000 + PM: Registered nosave memory: 00000000bdb02000 - 00000000bdb04000 + PM: Registered nosave memory: 00000000bdb04000 - 00000000bdb0d000 + PM: Registered nosave memory: 00000000bdb0d000 - 00000000bdb13000 + PM: Registered nosave memory: 00000000bdb13000 - 00000000bdb75000 + PM: Registered nosave memory: 00000000bdb75000 - 00000000bdd78000 PM: Registered nosave memory: 00000000bdf00000 - 00000000f8000000 PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000 PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000 @@ -161,14 +161,14 @@ PERCPU: Embedded 28 pages/cpu @ffff8800bd600000 s84416 r8192 d22080 u262144 pcpu-alloc: s84416 r8192 d22080 u262144 alloc=1*2097152 pcpu-alloc: [0] 0 1 2 3 4 5 6 7 - Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2055263 + Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2055259 Policy zone: Normal Kernel command line: tasks=standard pkgsel/language-pack-patterns= pkgsel/install-language-support=true vga=normal initrd=/images/ubuntu/11.04/mini-iso/64bit/initrd.gz -- quiet BOOT_IMAGE=/images/ubuntu/11.04/mini-iso/64bit/linux PID hash table entries: 4096 (order: 3, 32768 bytes) Checking aperture... No AGP bridge found Node 0: aperture @ f8000000 size 64 MB - Memory: 8145952k/9437184k available (5940k kernel code, 1087080k absent, 204152k reserved, 5017k data, 956k init) + Memory: 8145936k/9437184k available (5940k kernel code, 1087096k absent, 204152k reserved, 5017k data, 956k init) SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 Hierarchical RCU implementation. RCU dyntick-idle grace-period acceleration is enabled. @@ -181,8 +181,8 @@ please try 'cgroup_disable=memory' option if you don't want memory cgroups hpet clockevent registered Fast TSC calibration using PIT - Detected 3211.088 MHz processor. - Calibrating delay loop (skipped), value calculated using timer frequency.. 6422.17 BogoMIPS (lpj=32110880) + Detected 3211.052 MHz processor. + Calibrating delay loop (skipped), value calculated using timer frequency.. 6422.10 BogoMIPS (lpj=32110520) pid_max: default: 32768 minimum: 301 Security Framework initialized AppArmor: AppArmor initialized @@ -227,12 +227,12 @@ Switch to broadcast mode on CPU4 #5 Brought up 6 CPUs - Total of 6 processors activated (38530.17 BogoMIPS). + Total of 6 processors activated (38530.08 BogoMIPS). Switch to broadcast mode on CPU5 Switch to broadcast mode on CPU0 devtmpfs: initialized print_constraints: dummy: - Time: 23:05:30 Date: 09/07/11 + Time: 15:04:26 Date: 10/16/11 NET: Registered protocol family 16 node 0 link 0: io port [d000, ffff] TOM: 00000000c0000000 aka 3072M @@ -245,15 +245,18 @@ bus: 00 index 2 [mem 0xf0000000-0xffffffff] bus: 00 index 3 [mem 0x240000000-0xfcffffffff] Extended Config Space enabled on 1 nodes - Trying to unpack rootfs image as initramfs... ACPI: bus type pci registered + Trying to unpack rootfs image as initramfs... PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) PCI: not using MMCONFIG PCI: Using configuration type 1 for base access PCI: Using configuration type 1 for extended access + mtrr: your CPUs had inconsistent fixed MTRR settings + mtrr: probably your BIOS does not setup all CPUs. + mtrr: corrected configuration. bio: create slab <bio-0> at 0 ACPI: EC: Look up EC in DSDT - ACPI: Executed 3 blocks of module-level executable AML code + ACPI: Executed 2 blocks of module-level executable AML code ACPI Error: [RAMB] Namespace lookup failure, AE_NOT_FOUND (20110112/psargs-359) ACPI Exception: AE_NOT_FOUND, Could not execute arguments for [RAMW] (Region) (20110112/nsinit-349) ACPI: Interpreter enabled @@ -261,8 +264,8 @@ ACPI: Using IOAPIC for interrupt routing PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources - ACPI: EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62 Freeing initrd memory: 8992k freed + ACPI: EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62 ACPI: No dock devices found. HEST: Table not found. PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug @@ -341,15 +344,15 @@ pci 0000:00:02.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref] pci 0000:02:00.0: [10ec:8168] type 0 class 0x000200 pci 0000:02:00.0: reg 10: [io 0xd000-0xd0ff] - pci 0000:02:00.0: reg 18: [mem 0xd0004000-0xd0004fff 64bit pref] - pci 0000:02:00.0: reg 20: [mem 0xd0000000-0xd0003fff 64bit pref] + pci 0000:02:00.0: reg 18: [mem 0xd4004000-0xd4004fff 64bit pref] + pci 0000:02:00.0: reg 20: [mem 0xd4000000-0xd4003fff 64bit pref] pci 0000:02:00.0: supports D1 D2 pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:00.0: PME# disabled pci 0000:00:04.0: PCI bridge to [bus 02-02] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff] pci 0000:00:04.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) - pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd00fffff 64bit pref] + pci 0000:00:04.0: bridge window [mem 0xd4000000-0xd40fffff 64bit pref] pci 0000:03:00.0: [1b21:1042] type 0 class 0x000c03 pci 0000:03:00.0: reg 10: [mem 0xfe900000-0xfe907fff 64bit] pci 0000:03:00.0: PME# supported from D3hot D3cold @@ -358,10 +361,12 @@ pci 0000:00:07.0: bridge window [io 0xfff000-0x0000] (disabled) pci 0000:00:07.0: bridge window [mem 0xfe900000-0xfe9fffff] pci 0000:00:07.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) + pci 0000:04:05.0: [4444:0016] type 0 class 0x000400 + pci 0000:04:05.0: reg 10: [mem 0xd0000000-0xd3ffffff pref] pci 0000:00:14.4: PCI bridge to [bus 04-04] (subtractive decode) pci 0000:00:14.4: bridge window [io 0xf000-0x0000] (disabled) pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff] (disabled) - pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) + pci 0000:00:14.4: bridge window [mem 0xd0000000-0xd3ffffff pref] pci 0000:00:14.4: bridge window [io 0x0000-0x03af] (subtractive decode) pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7] (subtractive decode) pci 0000:00:14.4: bridge window [io 0x03b0-0x03df] (subtractive decode) @@ -394,7 +399,7 @@ PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes reserve RAM buffer: 000000000009d800 - 000000000009ffff - reserve RAM buffer: 00000000bd94d000 - 00000000bfffffff + reserve RAM buffer: 00000000bd94e000 - 00000000bfffffff reserve RAM buffer: 00000000bdf00000 - 00000000bfffffff NetLabel: Initializing NetLabel: domain hash size = 128 @@ -404,6 +409,12 @@ hpet0: 3 comparators, 32-bit 14.318180 MHz counter Switching to clocksource hpet AppArmor: AppArmor Filesystem Enabled + Switched to NOHz mode on CPU #5 + Switched to NOHz mode on CPU #0 + Switched to NOHz mode on CPU #4 + Switched to NOHz mode on CPU #1 + Switched to NOHz mode on CPU #2 + Switched to NOHz mode on CPU #3 pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:00: [bus 00-ff] @@ -414,14 +425,8 @@ pnp 00:00: [io 0x0d00-0xffff window] pnp 00:00: [mem 0x000a0000-0x000bffff window] pnp 00:00: [mem 0x000c0000-0x000dffff window] - Switched to NOHz mode on CPU #0 - Switched to NOHz mode on CPU #5 pnp 00:00: [mem 0xc0000000-0xffffffff window] - Switched to NOHz mode on CPU #1 pnp 00:00: [mem 0x00000000 window] - Switched to NOHz mode on CPU #3 - Switched to NOHz mode on CPU #4 - Switched to NOHz mode on CPU #2 pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) pnp 00:01: [mem 0xe0000000-0xefffffff] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved @@ -546,7 +551,7 @@ pci 0000:00:04.0: PCI bridge to [bus 02-02] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff] pci 0000:00:04.0: bridge window [mem disabled] - pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd00fffff 64bit pref] + pci 0000:00:04.0: bridge window [mem 0xd4000000-0xd40fffff 64bit pref] pci 0000:00:07.0: PCI bridge to [bus 03-03] pci 0000:00:07.0: bridge window [io disabled] pci 0000:00:07.0: bridge window [mem 0xfe900000-0xfe9fffff] @@ -554,7 +559,7 @@ pci 0000:00:14.4: PCI bridge to [bus 04-04] pci 0000:00:14.4: bridge window [io disabled] pci 0000:00:14.4: bridge window [mem disabled] - pci 0000:00:14.4: bridge window [mem pref disabled] + pci 0000:00:14.4: bridge window [mem 0xd0000000-0xd3ffffff pref] pci 0000:00:02.0: PCI INT A -> GSI 52 (level, low) -> IRQ 52 pci 0000:00:02.0: setting latency timer to 64 pci 0000:00:04.0: PCI INT A -> GSI 52 (level, low) -> IRQ 52 @@ -572,8 +577,9 @@ pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff] - pci_bus 0000:02: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref] + pci_bus 0000:02: resource 2 [mem 0xd4000000-0xd40fffff 64bit pref] pci_bus 0000:03: resource 1 [mem 0xfe900000-0xfe9fffff] + pci_bus 0000:04: resource 2 [mem 0xd0000000-0xd3ffffff pref] pci_bus 0000:04: resource 4 [io 0x0000-0x03af] pci_bus 0000:04: resource 5 [io 0x03e0-0x0cf7] pci_bus 0000:04: resource 6 [io 0x03b0-0x03df] @@ -599,7 +605,7 @@ PCI-DMA: using GART IOMMU. PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture audit: initializing netlink socket (disabled) - type=2000 audit(1315436729.210:1): initialized + type=2000 audit(1318777524.880:1): initialized HugeTLB registered 2 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) @@ -641,23 +647,23 @@ ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 hub 1-0:1.0: USB hub found hub 1-0:1.0: 5 ports detected - ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 + ehci_hcd 0000:00:13.2: PCI INT B -> GSI 21 (level, low) -> IRQ 21 ehci_hcd 0000:00:13.2: EHCI Host Controller ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:13.2: QUIRK: Enable exception for AMD Hudson ASPM ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround ehci_hcd 0000:00:13.2: debug port 1 - ehci_hcd 0000:00:13.2: irq 17, io mem 0xfeb07000 + ehci_hcd 0000:00:13.2: irq 21, io mem 0xfeb07000 ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 hub 2-0:1.0: USB hub found hub 2-0:1.0: 5 ports detected - ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 + ehci_hcd 0000:00:16.2: PCI INT B -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:16.2: EHCI Host Controller ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 3 ehci_hcd 0000:00:16.2: QUIRK: Enable exception for AMD Hudson ASPM ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround ehci_hcd 0000:00:16.2: debug port 1 - ehci_hcd 0000:00:16.2: irq 17, io mem 0xfeb04000 + ehci_hcd 0000:00:16.2: irq 23, io mem 0xfeb04000 ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00 hub 3-0:1.0: USB hub found hub 3-0:1.0: 4 ports detected @@ -668,10 +674,10 @@ ohci_hcd 0000:00:12.0: irq 18, io mem 0xfeb0a000 hub 4-0:1.0: USB hub found hub 4-0:1.0: 5 ports detected - ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 + ohci_hcd 0000:00:13.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 ohci_hcd 0000:00:13.0: OHCI Host Controller ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5 - ohci_hcd 0000:00:13.0: irq 18, io mem 0xfeb08000 + ohci_hcd 0000:00:13.0: irq 20, io mem 0xfeb08000 hub 5-0:1.0: USB hub found hub 5-0:1.0: 5 ports detected ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18 @@ -680,21 +686,21 @@ ohci_hcd 0000:00:14.5: irq 18, io mem 0xfeb06000 hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected - ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 + ohci_hcd 0000:00:16.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 ohci_hcd 0000:00:16.0: OHCI Host Controller ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 7 - ohci_hcd 0000:00:16.0: irq 18, io mem 0xfeb05000 + ohci_hcd 0000:00:16.0: irq 22, io mem 0xfeb05000 hub 7-0:1.0: USB hub found hub 7-0:1.0: 4 ports detected uhci_hcd: USB Universal Host Controller Interface driver - Refined TSC clocksource calibration: 3210.781 MHz. - Switching to clocksource tsc i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mousedev: PS/2 mouse device common for all mice rtc_cmos 00:05: RTC can wake from S4 input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 + Refined TSC clocksource calibration: 3210.779 MHz. + Switching to clocksource tsc rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs device-mapper: uevent: version 1.0.3 @@ -715,8 +721,8 @@ powernow-k8: 3 : pstate 3 (800 MHz) PM: Hibernation image not present or could not be loaded. registered taskstats version 1 - Magic number: 11:497:99 - rtc_cmos 00:05: setting system clock to 2011-09-07 23:05:31 UTC (1315436731) + Magic number: 15:330:83 + rtc_cmos 00:05: setting system clock to 2011-10-16 15:05:26 UTC (1318777526) BIOS EDD facility v0.16 2004-Jun-25, 0 devices found EDD information not available. Freeing unused kernel memory: 956k freed @@ -733,28 +739,6 @@ vga16fb: mapped to 0xffff8800000a0000 Console: switching to colour frame buffer device 80x30 fb0: VGA16 VGA frame buffer device - usb 3-1: new high speed USB device using ehci_hcd and address 2 - usb 3-1: device descriptor read/64, error -32 - usb 3-1: device descriptor read/64, error -32 - usb 3-1: new high speed USB device using ehci_hcd and address 3 - usb 3-1: device descriptor read/64, error -32 - usb 3-1: device descriptor read/64, error -32 - usb 3-1: new high speed USB device using ehci_hcd and address 4 - usb 3-1: device not accepting address 4, error -32 - usb 3-1: new high speed USB device using ehci_hcd and address 5 - usb 3-1: device not accepting address 5, error -32 - hub 3-0:1.0: unable to enumerate USB device on port 1 - usb 7-1: new full speed USB device using ohci_hcd and address 2 - usb 7-1: device descriptor read/64, error -32 - usb 7-1: device descriptor read/64, error -32 - usb 7-1: new full speed USB device using ohci_hcd and address 3 - usb 7-1: device descriptor read/64, error -32 - usb 7-1: device descriptor read/64, error -32 - usb 7-1: new full speed USB device using ohci_hcd and address 4 - usb 7-1: device not accepting address 4, error -32 - usb 7-1: new full speed USB device using ohci_hcd and address 5 - usb 7-1: device not accepting address 5, error -32 - hub 7-0:1.0: unable to enumerate USB device on port 1 Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. @@ -772,12 +756,18 @@ r8169 0000:02:00.0: (unregistered net_device): unknown MAC, using family default r8169 0000:02:00.0: irq 72 for MSI/MSI-X r8169 0000:02:00.0: eth0: RTL8168b/8111b at 0xffffc90011794000, 14:da:e9:03:e9:b7, XID 0c900800 IRQ 72 + r8169 0000:02:00.0: PCI INT A disabled + r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded + r8169 0000:02:00.0: PCI INT A -> GSI 44 (level, low) -> IRQ 44 + r8169 0000:02:00.0: setting latency timer to 64 + r8169 0000:02:00.0: (unregistered net_device): unknown MAC, using family default + r8169 0000:02:00.0: irq 72 for MSI/MSI-X + r8169 0000:02:00.0: eth0: RTL8168b/8111b at 0xffffc90011794000, 14:da:e9:03:e9:b7, XID 0c900800 IRQ 72 r8169 0000:02:00.0: eth0: link down r8169 0000:02:00.0: eth0: link down ADDRCONF(NETDEV_UP): eth0: link is not ready r8169 0000:02:00.0: eth0: link up ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready - usbcore: deregistering interface driver usb-storage ahci 0000:00:11.0: version 3.0 ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode @@ -797,13 +787,11 @@ ata4: SATA link down (SStatus 0 SControl 300) ata6: SATA link down (SStatus 0 SControl 300) ata3: SATA link down (SStatus 0 SControl 300) - ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) + ata5: SATA link down (SStatus 0 SControl 300) ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ATA-8: WDC WD3000HLFS-01G6U4, 04.04V06, max UDMA/133 ata1.00: 586072368 sectors, multi 16: LBA48 NCQ (depth 31/32), AA - ata2.00: ATA-8: WDC WD3000HLFS-01G6U4, 04.04V06, max UDMA/133 - ata2.00: 586072368 sectors, multi 16: LBA48 NCQ (depth 31/32), AA - ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) + ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA WDC WD3000HLFS-0 04.0 PQ: 0 ANSI: 5 sd 0:0:0:0: Attached scsi generic sg0 type 0 @@ -811,6 +799,8 @@ sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA + ata2.00: ATA-8: WDC WD3000HLFS-01G6U4, 04.04V06, max UDMA/133 + ata2.00: 586072368 sectors, multi 16: LBA48 NCQ (depth 31/32), AA ata2.00: configured for UDMA/133 scsi 1:0:0:0: Direct-Access ATA WDC WD3000HLFS-0 04.0 PQ: 0 ANSI: 5 sd 1:0:0:0: Attached scsi generic sg1 type 0 @@ -818,24 +808,10 @@ sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA - ata5.00: ATA-7: HDS725050KLA360, K2AOAH0A, max UDMA/133 - ata5.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA - ata5.00: configured for UDMA/133 - scsi 4:0:0:0: Direct-Access ATA HDS725050KLA360 K2AO PQ: 0 ANSI: 5 - sd 4:0:0:0: Attached scsi generic sg2 type 0 - sd 4:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB) - sd 4:0:0:0: [sdc] Write Protect is off - sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00 - sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sd 0:0:0:0: [sda] Attached SCSI disk sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7 sd 1:0:0:0: [sdb] Attached SCSI disk - sdc: sdc1 sdc2 sdc4 - sd 4:0:0:0: [sdc] Attached SCSI disk - Initializing USB Mass Storage driver... - usbcore: registered new interface driver usb-storage - USB Mass Storage support registered. NTFS driver 2.1.30 [Flags: R/O MODULE]. Btrfs loaded JFS: nTxBlock = 8192, nTxLock = 65536 @@ -883,12 +859,6 @@ EXT3-fs (sda2): error: couldn't mount because of unsupported optional features (240) EXT2-fs (sda2): error: couldn't mount because of unsupported optional features (240) EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) - EXT3-fs (sdc1): error: couldn't mount because of unsupported optional features (240) - EXT2-fs (sdc1): error: couldn't mount because of unsupported optional features (240) - EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null) - EXT3-fs (sdc2): error: couldn't mount because of unsupported optional features (240) - EXT2-fs (sdc2): error: couldn't mount because of unsupported optional features (240) - EXT4-fs (sdc2): mounted filesystem with ordered data mode. Opts: (null) EXT3-fs (md0): error: couldn't mount because of unsupported optional features (240) EXT2-fs (md0): error: couldn't mount because of unsupported optional features (240) EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null) @@ -904,14 +874,28 @@ EXT3-fs (sda2): error: couldn't mount because of unsupported optional features (240) EXT2-fs (sda2): error: couldn't mount because of unsupported optional features (240) EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) - EXT3-fs (sdc1): error: couldn't mount because of unsupported optional features (240) - EXT2-fs (sdc1): error: couldn't mount because of unsupported optional features (240) - EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null) - EXT3-fs (sdc2): error: couldn't mount because of unsupported optional features (240) - EXT2-fs (sdc2): error: couldn't mount because of unsupported optional features (240) - EXT4-fs (sdc2): mounted filesystem with ordered data mode. Opts: (null) - EXT3-fs (sdc2): error: couldn't mount because of unsupported optional features (240) - EXT2-fs (sdc2): error: couldn't mount because of unsupported optional features (240) - EXT4-fs (sdc2): mounted filesystem with ordered data mode. Opts: - - + EXT3-fs (md126): error: couldn't mount because of unsupported optional features (240) + EXT2-fs (md126): error: couldn't mount because of unsupported optional features (240) + EXT4-fs (md126): mounted filesystem with ordered data mode. Opts: + usb 3-2: new high speed USB device using ehci_hcd and address 2 + usb 3-2: device descriptor read/64, error -32 + usb 3-2: device descriptor read/64, error -32 + usb 3-2: new high speed USB device using ehci_hcd and address 3 + usb 3-2: device descriptor read/64, error -32 + usb 3-2: device descriptor read/64, error -32 + usb 3-2: new high speed USB device using ehci_hcd and address 4 + usb 3-2: device not accepting address 4, error -32 + usb 3-2: new high speed USB device using ehci_hcd and address 5 + usb 3-2: device not accepting address 5, error -32 + hub 3-0:1.0: unable to enumerate USB device on port 2 + usb 7-2: new full speed USB device using ohci_hcd and address 2 + usb 7-2: device descriptor read/64, error -32 + usb 7-2: device descriptor read/64, error -32 + usb 7-2: new full speed USB device using ohci_hcd and address 3 + usb 7-2: device descriptor read/64, error -32 + usb 7-2: device descriptor read/64, error -32 + usb 7-2: new full speed USB device using ohci_hcd and address 4 + usb 7-2: device not accepting address 4, error -32 + usb 7-2: new full speed USB device using ohci_hcd and address 5 + usb 7-2: device not accepting address 5, error -32 + hub 7-0:1.0: unable to enumerate USB device on port 2
--- dmesg_32.v2 2011-10-19 10:22:14.284864445 +0200 +++ dmesg_32.v1 2011-10-19 10:21:55.828850426 +0200 @@ -1,22 +1,22 @@ Initializing cgroup subsys cpuset Initializing cgroup subsys cpu - Linux version 2.6.38-11-generic-pae (buildd@rothera) (gcc version 4.5.2 (Ubuntu/Linaro 4.5.2-8ubuntu4) ) #48-Ubuntu SMP Fri Jul 29 20:51:21 UTC 2011 (Ubuntu 2.6.38-11.48-generic-pae 2.6.38.8) + Linux version 2.6.38-8-generic (buildd@vernadsky) (gcc version 4.5.2 (Ubuntu/Linaro 4.5.2-8ubuntu3) ) #42-Ubuntu SMP Mon Apr 11 03:31:50 UTC 2011 (Ubuntu 2.6.38-8.42-generic 2.6.38.2) BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009d800 (usable) BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) - BIOS-e820: 0000000000100000 - 00000000bd94d000 (usable) - BIOS-e820: 00000000bd94d000 - 00000000bd99c000 (ACPI NVS) - BIOS-e820: 00000000bd99c000 - 00000000bd9a4000 (ACPI data) - BIOS-e820: 00000000bd9a4000 - 00000000bdadc000 (reserved) - BIOS-e820: 00000000bdadc000 - 00000000bdaed000 (ACPI NVS) - BIOS-e820: 00000000bdaed000 - 00000000bdb00000 (reserved) - BIOS-e820: 00000000bdb00000 - 00000000bdb02000 (ACPI NVS) - BIOS-e820: 00000000bdb02000 - 00000000bdb0b000 (reserved) - BIOS-e820: 00000000bdb0b000 - 00000000bdb11000 (ACPI NVS) - BIOS-e820: 00000000bdb11000 - 00000000bdb70000 (reserved) - BIOS-e820: 00000000bdb70000 - 00000000bdd73000 (ACPI NVS) - BIOS-e820: 00000000bdd73000 - 00000000bdf00000 (usable) + BIOS-e820: 0000000000100000 - 00000000bd94e000 (usable) + BIOS-e820: 00000000bd94e000 - 00000000bd99d000 (ACPI NVS) + BIOS-e820: 00000000bd99d000 - 00000000bd9a6000 (ACPI data) + BIOS-e820: 00000000bd9a6000 - 00000000bdade000 (reserved) + BIOS-e820: 00000000bdade000 - 00000000bdaef000 (ACPI NVS) + BIOS-e820: 00000000bdaef000 - 00000000bdb02000 (reserved) + BIOS-e820: 00000000bdb02000 - 00000000bdb04000 (ACPI NVS) + BIOS-e820: 00000000bdb04000 - 00000000bdb0d000 (reserved) + BIOS-e820: 00000000bdb0d000 - 00000000bdb13000 (ACPI NVS) + BIOS-e820: 00000000bdb13000 - 00000000bdb75000 (reserved) + BIOS-e820: 00000000bdb75000 - 00000000bdd78000 (ACPI NVS) + BIOS-e820: 00000000bdd78000 - 00000000bdf00000 (usable) BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fec10000 - 00000000fec11000 (reserved) @@ -26,12 +26,13 @@ BIOS-e820: 00000000fed80000 - 00000000fed90000 (reserved) BIOS-e820: 00000000fef00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100001000 - 0000000240000000 (usable) - NX (Execute Disable) protection: active + Notice: NX (Execute Disable) protection cannot be enabled in hardware: non-PAE kernel! + NX (Execute Disable) protection: approximated by x86 segment limits DMI 2.7 present. - DMI: To be filled by O.E.M. To be filled by O.E.M./M5A97, BIOS 0503 05/30/2011 + DMI: To be filled by O.E.M. To be filled by O.E.M./M5A97, BIOS 0705 08/22/2011 e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) e820 remove range: 00000000000a0000 - 0000000000100000 (usable) - last_pfn = 0x240000 max_arch_pfn = 0x1000000 + last_pfn = 0xbdf00 max_arch_pfn = 0x100000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back @@ -40,10 +41,10 @@ D1000-EBFFF uncachable EC000-FFFFF write-protect MTRR variable ranges enabled: - 0 base 000000000000 mask FFFF00000000 write-back - 1 base 0000BDF00000 mask FFFFFFF00000 uncachable - 2 base 0000BE000000 mask FFFFFE000000 uncachable - 3 base 0000C0000000 mask FFFFC0000000 uncachable + 0 base 000000000000 mask FFFF80000000 write-back + 1 base 000080000000 mask FFFFC0000000 write-back + 2 base 0000BDF00000 mask FFFFFFF00000 uncachable + 3 base 0000BE000000 mask FFFFFE000000 uncachable 4 disabled 5 disabled 6 disabled @@ -51,47 +52,48 @@ TOM2: 0000000240000000 aka 9216M x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 e820 update range: 00000000bdf00000 - 0000000100000000 (usable) ==> (reserved) - initial memory mapped : 0 - 01e00000 - init_memory_mapping: 0000000000000000-0000000037bfe000 - 0000000000 - 0000200000 page 4k - 0000200000 - 0037a00000 page 2M - 0037a00000 - 0037bfe000 page 4k - kernel direct mapping tables up to 37bfe000 @ 1dfb000-1e00000 - RAMDISK: 366c6000 - 3735b000 + initial memory mapped : 0 - 01c00000 + init_memory_mapping: 0000000000000000-00000000377fe000 + 0000000000 - 0000400000 page 4k + 0000400000 - 0037400000 page 2M + 0037400000 - 00377fe000 page 4k + kernel direct mapping tables up to 377fe000 @ 1bfb000-1c00000 + RAMDISK: 7f862000 - 80000000 + Allocated new RAMDISK: 37060000 - 377fdfc7 + Move RAMDISK from 000000007f862000 - 000000007fffffc6 to 37060000 - 377fdfc6 ACPI: RSDP 000f0450 00024 (v02 ALASKA) - ACPI: XSDT bd99c068 0004C (v01 ALASKA A M I 01072009 AMI 00010013) - ACPI: FACP bd9a2a68 000F4 (v04 ALASKA A M I 01072009 AMI 00010013) + ACPI: XSDT bd99d068 0004C (v01 ALASKA A M I 01072009 AMI 00010013) + ACPI: FACP bd9a4038 000F4 (v04 ALASKA A M I 01072009 AMI 00010013) ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20110112/tbfadt-557) - ACPI: DSDT bd99c140 06924 (v02 ALASKA A M I 00000000 INTL 20051117) - ACPI: FACS bdb0bf80 00040 - ACPI: APIC bd9a2b60 0009E (v03 ALASKA A M I 01072009 AMI 00010013) - ACPI: MCFG bd9a2c00 0003C (v01 ALASKA A M I 01072009 MSFT 00010013) - ACPI: HPET bd9a2c40 00038 (v01 ALASKA A M I 01072009 AMI 00000004) - ACPI: SSDT bd9a2c78 00DDA (v01 AMD POWERNOW 00000001 AMD 00000001) + ACPI: DSDT bd99d140 06EF1 (v02 ALASKA A M I 00000000 INTL 20051117) + ACPI: FACS bdb0df80 00040 + ACPI: APIC bd9a4130 0009E (v03 ALASKA A M I 01072009 AMI 00010013) + ACPI: MCFG bd9a41d0 0003C (v01 ALASKA A M I 01072009 MSFT 00010013) + ACPI: HPET bd9a4210 00038 (v01 ALASKA A M I 01072009 AMI 00000004) + ACPI: SSDT bd9a4248 00E10 (v01 AMD POWERNOW 00000001 AMD 00000001) ACPI: Local APIC address 0xfee00000 - 8324MB HIGHMEM available. - 891MB LOWMEM available. - mapped low ram: 0 - 37bfe000 - low ram: 0 - 37bfe000 + 2151MB HIGHMEM available. + 887MB LOWMEM available. + mapped low ram: 0 - 377fe000 + low ram: 0 - 377fe000 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 - Normal 0x00001000 -> 0x00037bfe - HighMem 0x00037bfe -> 0x00240000 + Normal 0x00001000 -> 0x000377fe + HighMem 0x000377fe -> 0x000bdf00 Movable zone start PFN for each node - early_node_map[4] active PFN ranges + early_node_map[3] active PFN ranges 0: 0x00000010 -> 0x0000009d - 0: 0x00000100 -> 0x000bd94d - 0: 0x000bdd73 -> 0x000bdf00 - 0: 0x00100001 -> 0x00240000 - On node 0 totalpages: 2087526 - free_area_init_node: node 0, pgdat c17bac40, node_mem_map f1ec6200 + 0: 0x00000100 -> 0x000bd94e + 0: 0x000bdd78 -> 0x000bdf00 + On node 0 totalpages: 776803 + free_area_init_node: node 0, pgdat c1784100, node_mem_map f589f200 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3949 pages, LIFO batch:0 - Normal zone: 1752 pages used for memmap - Normal zone: 222502 pages, LIFO batch:31 - HighMem zone: 16649 pages used for memmap - HighMem zone: 1842642 pages, LIFO batch:31 + Normal zone: 1744 pages used for memmap + Normal zone: 221486 pages, LIFO batch:31 + HighMem zone: 4303 pages used for memmap + HighMem zone: 545289 pages, LIFO batch:31 Using APIC driver default ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 @@ -124,43 +126,41 @@ Allocating PCI resources starting at bdf00000 (gap: bdf00000:3a100000) Booting paravirtualized kernel on bare hardware setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 - PERCPU: Embedded 13 pages/cpu @f7800000 s32320 r0 d20928 u262144 - pcpu-alloc: s32320 r0 d20928 u262144 alloc=1*2097152 + PERCPU: Embedded 13 pages/cpu @f5400000 s28800 r0 d24448 u524288 + pcpu-alloc: s28800 r0 d24448 u524288 alloc=1*4194304 pcpu-alloc: [0] 0 1 2 3 4 5 6 7 - Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2069093 - Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-11-generic-pae root=UUID=6d351741-09db-4c02-8a37-6d7910d9d4da ro quiet splash vt.handoff=7 + Built 1 zonelists in Zone order, mobility grouping on. Total pages: 770724 + Kernel command line: tasks=standard pkgsel/language-pack-patterns= pkgsel/install-language-support=true vga=normal initrd=/images/ubuntu/11.04/mini-iso/initrd.gz -- quiet BOOT_IMAGE=/images/ubuntu/11.04/mini-iso/linux PID hash table entries: 4096 (order: 2, 16384 bytes) Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Initializing CPU#0 - allocated 47185600 bytes of page_cgroup + allocated 15559360 bytes of page_cgroup please try 'cgroup_disable=memory' option if you don't want memory cgroups - Initializing HighMem for node 0 (00037bfe:00240000) - Memory: 8206480k/9437184k available (5351k kernel code, 143624k reserved, 2597k data, 720k init, 7437164k highmem) + Initializing HighMem for node 0 (000377fe:000bdf00) + Memory: 3049236k/3111936k available (5188k kernel code, 57976k reserved, 2540k data, 700k init, 2198368k highmem) virtual kernel memory layout: fixmap : 0xfff16000 - 0xfffff000 ( 932 kB) - pkmap : 0xffc00000 - 0xffe00000 (2048 kB) - vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB) - lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB) - .init : 0xc17c4000 - 0xc1878000 ( 720 kB) - .data : 0xc1539e95 - 0xc17c35c0 (2597 kB) - .text : 0xc1000000 - 0xc1539e95 (5351 kB) + pkmap : 0xff800000 - 0xffc00000 (4096 kB) + vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) + lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) + .init : 0xc178d000 - 0xc183c000 ( 700 kB) + .data : 0xc15112a1 - 0xc178c480 (2540 kB) + .text : 0xc1000000 - 0xc15112a1 (5188 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 Hierarchical RCU implementation. RCU dyntick-idle grace-period acceleration is enabled. RCU-based detection of stalled CPUs is disabled. NR_IRQS:2304 nr_irqs:1288 16 - CPU 0 irqstacks, hard=f740a000 soft=f740c000 + CPU 0 irqstacks, hard=f400a000 soft=f400c000 Extended CMOS year: 2000 - spurious 8259A interrupt: IRQ7. - vt handoff: transparent VT on vt#7 Console: colour VGA+ 80x25 console [tty0] enabled hpet clockevent registered Fast TSC calibration using PIT - Detected 3210.863 MHz processor. - Calibrating delay loop (skipped), value calculated using timer frequency.. 6421.72 BogoMIPS (lpj=12843452) + Detected 3210.741 MHz processor. + Calibrating delay loop (skipped), value calculated using timer frequency.. 6421.48 BogoMIPS (lpj=12842964) pid_max: default: 32768 minimum: 301 Security Framework initialized AppArmor: AppArmor initialized @@ -179,7 +179,7 @@ mce: CPU supports 6 MCE banks using C1E aware idle routine ACPI: Core revision 20110112 - ftrace: allocating 24259 entries in 48 pages + ftrace: allocating 23640 entries in 47 pages Enabling APIC mode: Flat. Using 2 I/O APICs ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: AMD Phenom(tm) II X6 1090T Processor stepping 00 @@ -191,33 +191,33 @@ ... max period: 00007fffffffffff ... fixed-purpose events: 0 ... event mask: 000000000000000f - CPU 1 irqstacks, hard=f74ae000 soft=f74b8000 + CPU 1 irqstacks, hard=f40ae000 soft=f40b8000 Booting Node 0, Processors #1 Initializing CPU#1 System has AMD C1E enabled Switch to broadcast mode on CPU1 - CPU 2 irqstacks, hard=f74e2000 soft=f74e4000 + CPU 2 irqstacks, hard=f40e2000 soft=f40e4000 #2 Initializing CPU#2 Switch to broadcast mode on CPU2 - CPU 3 irqstacks, hard=f74ee000 soft=f74f0000 + CPU 3 irqstacks, hard=f40ee000 soft=f40f0000 #3 Initializing CPU#3 Switch to broadcast mode on CPU3 - CPU 4 irqstacks, hard=f7506000 soft=f7508000 + CPU 4 irqstacks, hard=f4106000 soft=f4108000 #4 Initializing CPU#4 Switch to broadcast mode on CPU4 - CPU 5 irqstacks, hard=f7526000 soft=f7528000 + CPU 5 irqstacks, hard=f4126000 soft=f4128000 #5 Initializing CPU#5 Brought up 6 CPUs - Total of 6 processors activated (38529.53 BogoMIPS). + Total of 6 processors activated (38529.97 BogoMIPS). Switch to broadcast mode on CPU5 Switch to broadcast mode on CPU0 devtmpfs: initialized print_constraints: dummy: - Time: 22:52:03 Date: 09/07/11 + Time: 14:56:27 Date: 10/16/11 NET: Registered protocol family 16 EISA bus registered node 0 link 0: io port [d000, ffff] @@ -229,7 +229,6 @@ bus: 00 index 0 [io 0x0000-0xffff] bus: 00 index 1 [mem 0xc0000000-0xdfffffff] bus: 00 index 2 [mem 0xf0000000-0xffffffff] - bus: 00 index 3 [mem 0x240000000-0xfcffffffff] Extended Config Space enabled on 1 nodes ACPI: bus type pci registered Trying to unpack rootfs image as initramfs... @@ -237,9 +236,12 @@ PCI: not using MMCONFIG PCI: Using configuration type 1 for base access PCI: Using configuration type 1 for extended access + mtrr: your CPUs had inconsistent fixed MTRR settings + mtrr: probably your BIOS does not setup all CPUs. + mtrr: corrected configuration. bio: create slab <bio-0> at 0 ACPI: EC: Look up EC in DSDT - ACPI: Executed 3 blocks of module-level executable AML code + ACPI: Executed 2 blocks of module-level executable AML code ACPI Error: [RAMB] Namespace lookup failure, AE_NOT_FOUND (20110112/psargs-359) ACPI Exception: AE_NOT_FOUND, Could not execute arguments for [RAMW] (Region) (20110112/nsinit-349) ACPI: Interpreter enabled @@ -327,27 +329,30 @@ pci 0000:00:02.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref] pci 0000:02:00.0: [10ec:8168] type 0 class 0x000200 pci 0000:02:00.0: reg 10: [io 0xd000-0xd0ff] - pci 0000:02:00.0: reg 18: [mem 0xd0004000-0xd0004fff 64bit pref] - pci 0000:02:00.0: reg 20: [mem 0xd0000000-0xd0003fff 64bit pref] + pci 0000:02:00.0: reg 18: [mem 0xd4004000-0xd4004fff 64bit pref] + pci 0000:02:00.0: reg 20: [mem 0xd4000000-0xd4003fff 64bit pref] pci 0000:02:00.0: supports D1 D2 pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:00.0: PME# disabled pci 0000:00:04.0: PCI bridge to [bus 02-02] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff] pci 0000:00:04.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) - pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd00fffff 64bit pref] + pci 0000:00:04.0: bridge window [mem 0xd4000000-0xd40fffff 64bit pref] pci 0000:03:00.0: [1b21:1042] type 0 class 0x000c03 pci 0000:03:00.0: reg 10: [mem 0xfe900000-0xfe907fff 64bit] pci 0000:03:00.0: PME# supported from D3hot D3cold pci 0000:03:00.0: PME# disabled + Freeing initrd memory: 7800k freed pci 0000:00:07.0: PCI bridge to [bus 03-03] pci 0000:00:07.0: bridge window [io 0xfff000-0x0000] (disabled) pci 0000:00:07.0: bridge window [mem 0xfe900000-0xfe9fffff] pci 0000:00:07.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) + pci 0000:04:05.0: [4444:0016] type 0 class 0x000400 + pci 0000:04:05.0: reg 10: [mem 0xd0000000-0xd3ffffff pref] pci 0000:00:14.4: PCI bridge to [bus 04-04] (subtractive decode) pci 0000:00:14.4: bridge window [io 0xf000-0x0000] (disabled) pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff] (disabled) - pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) + pci 0000:00:14.4: bridge window [mem 0xd0000000-0xd3ffffff pref] pci 0000:00:14.4: bridge window [io 0x0000-0x03af] (subtractive decode) pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7] (subtractive decode) pci 0000:00:14.4: bridge window [io 0x03b0-0x03df] (subtractive decode) @@ -381,7 +386,7 @@ PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes reserve RAM buffer: 000000000009d800 - 000000000009ffff - reserve RAM buffer: 00000000bd94d000 - 00000000bfffffff + reserve RAM buffer: 00000000bd94e000 - 00000000bfffffff reserve RAM buffer: 00000000bdf00000 - 00000000bfffffff NetLabel: Initializing NetLabel: domain hash size = 128 @@ -390,12 +395,12 @@ hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 comparators, 32-bit 14.318180 MHz counter Switching to clocksource hpet - Switched to NOHz mode on CPU #1 - Switched to NOHz mode on CPU #3 - Switched to NOHz mode on CPU #2 Switched to NOHz mode on CPU #5 - Switched to NOHz mode on CPU #0 + Switched to NOHz mode on CPU #2 Switched to NOHz mode on CPU #4 + Switched to NOHz mode on CPU #0 + Switched to NOHz mode on CPU #3 + Switched to NOHz mode on CPU #1 AppArmor: AppArmor Filesystem Enabled pnp: PnP ACPI init ACPI: bus type pnp registered @@ -427,7 +432,7 @@ pnp 00:02: [io 0x0cd6-0x0cd7] pnp 00:02: [io 0x0cd8-0x0cdf] pnp 00:02: [io 0x0800-0x089f] - pnp 00:02: [io 0x0000-0xffffffffffffffff disabled] + pnp 00:02: [io 0x0000-0xffffffff disabled] pnp 00:02: [io 0x0000-0x000f] pnp 00:02: [io 0x0b20-0x0b3f] pnp 00:02: [io 0x0900-0x090f] @@ -468,9 +473,9 @@ system 00:02: [mem 0xfed00000-0xfed00fff] has been reserved system 00:02: [mem 0xffc00000-0xffffffff] has been reserved system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) - pnp 00:03: [io 0x0000-0xffffffffffffffff disabled] + pnp 00:03: [io 0x0000-0xffffffff disabled] pnp 00:03: [io 0x0290-0x02af] - pnp 00:03: [io 0x0000-0xffffffffffffffff disabled] + pnp 00:03: [io 0x0000-0xffffffff disabled] system 00:03: [io 0x0290-0x02af] has been reserved system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:04: [dma 4] @@ -516,9 +521,9 @@ pnp 00:0c: [irq 4] pnp 00:0c: [dma 0 disabled] pnp 00:0c: Plug and Play ACPI device, IDs PNP0501 (active) - pnp 00:0d: [mem 0x00000000-0xffffffffffffffff disabled] + pnp 00:0d: [mem 0x00000000-0xffffffff disabled] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active) - pnp 00:0e: [mem 0x00000000-0xffffffffffffffff disabled] + pnp 00:0e: [mem 0x00000000-0xffffffff disabled] pnp 00:0e: [mem 0xfec20000-0xfec200ff] system 00:0e: [mem 0xfec20000-0xfec200ff] could not be reserved system 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active) @@ -534,7 +539,7 @@ pci 0000:00:04.0: PCI bridge to [bus 02-02] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff] pci 0000:00:04.0: bridge window [mem disabled] - pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd00fffff 64bit pref] + pci 0000:00:04.0: bridge window [mem 0xd4000000-0xd40fffff 64bit pref] pci 0000:00:07.0: PCI bridge to [bus 03-03] pci 0000:00:07.0: bridge window [io disabled] pci 0000:00:07.0: bridge window [mem 0xfe900000-0xfe9fffff] @@ -542,7 +547,7 @@ pci 0000:00:14.4: PCI bridge to [bus 04-04] pci 0000:00:14.4: bridge window [io disabled] pci 0000:00:14.4: bridge window [mem disabled] - pci 0000:00:14.4: bridge window [mem pref disabled] + pci 0000:00:14.4: bridge window [mem 0xd0000000-0xd3ffffff pref] pci 0000:00:02.0: PCI INT A -> GSI 52 (level, low) -> IRQ 52 pci 0000:00:02.0: setting latency timer to 64 pci 0000:00:04.0: PCI INT A -> GSI 52 (level, low) -> IRQ 52 @@ -560,8 +565,9 @@ pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff] - pci_bus 0000:02: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref] + pci_bus 0000:02: resource 2 [mem 0xd4000000-0xd40fffff 64bit pref] pci_bus 0000:03: resource 1 [mem 0xfe900000-0xfe9fffff] + pci_bus 0000:04: resource 2 [mem 0xd0000000-0xd3ffffff pref] pci_bus 0000:04: resource 4 [io 0x0000-0x03af] pci_bus 0000:04: resource 5 [io 0x03e0-0x0cf7] pci_bus 0000:04: resource 6 [io 0x03b0-0x03df] @@ -578,18 +584,17 @@ UDP hash table entries: 512 (order: 2, 16384 bytes) UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) NET: Registered protocol family 1 - Freeing initrd memory: 12884k freed pci 0000:01:00.0: Boot video device PCI: CLS 64 bytes, default 64 cpufreq-nforce2: No nForce2 chipset. audit: initializing netlink socket (disabled) - type=2000 audit(1315435924.524:1): initialized + type=2000 audit(1318777072.293:1): initialized highmem bounce pool size: 64 pages - HugeTLB registered 2 MB page size, pre-allocated 0 pages + HugeTLB registered 4 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) fuse init (API version 7.16) - msgmni has been set to 1527 + msgmni has been set to 1677 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler deadline registered @@ -628,23 +633,23 @@ ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 hub 1-0:1.0: USB hub found hub 1-0:1.0: 5 ports detected - ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 + ehci_hcd 0000:00:13.2: PCI INT B -> GSI 21 (level, low) -> IRQ 21 ehci_hcd 0000:00:13.2: EHCI Host Controller ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:13.2: QUIRK: Enable exception for AMD Hudson ASPM ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround ehci_hcd 0000:00:13.2: debug port 1 - ehci_hcd 0000:00:13.2: irq 17, io mem 0xfeb07000 + ehci_hcd 0000:00:13.2: irq 21, io mem 0xfeb07000 ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 hub 2-0:1.0: USB hub found hub 2-0:1.0: 5 ports detected - ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 + ehci_hcd 0000:00:16.2: PCI INT B -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:16.2: EHCI Host Controller ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 3 ehci_hcd 0000:00:16.2: QUIRK: Enable exception for AMD Hudson ASPM ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround ehci_hcd 0000:00:16.2: debug port 1 - ehci_hcd 0000:00:16.2: irq 17, io mem 0xfeb04000 + ehci_hcd 0000:00:16.2: irq 23, io mem 0xfeb04000 ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00 hub 3-0:1.0: USB hub found hub 3-0:1.0: 4 ports detected @@ -655,10 +660,10 @@ ohci_hcd 0000:00:12.0: irq 18, io mem 0xfeb0a000 hub 4-0:1.0: USB hub found hub 4-0:1.0: 5 ports detected - ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 + ohci_hcd 0000:00:13.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 ohci_hcd 0000:00:13.0: OHCI Host Controller ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5 - ohci_hcd 0000:00:13.0: irq 18, io mem 0xfeb08000 + ohci_hcd 0000:00:13.0: irq 20, io mem 0xfeb08000 hub 5-0:1.0: USB hub found hub 5-0:1.0: 5 ports detected ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18 @@ -667,10 +672,10 @@ ohci_hcd 0000:00:14.5: irq 18, io mem 0xfeb06000 hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected - ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 + ohci_hcd 0000:00:16.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 ohci_hcd 0000:00:16.0: OHCI Host Controller ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 7 - ohci_hcd 0000:00:16.0: irq 18, io mem 0xfeb05000 + ohci_hcd 0000:00:16.0: irq 22, io mem 0xfeb05000 hub 7-0:1.0: USB hub found hub 7-0:1.0: 4 ports detected uhci_hcd: USB Universal Host Controller Interface driver @@ -711,230 +716,49 @@ Using IPI No-Shortcut mode PM: Hibernation image not present or could not be loaded. registered taskstats version 1 - Magic number: 11:218:906 - rtc_cmos 00:05: setting system clock to 2011-09-07 22:52:05 UTC (1315435925) + Magic number: 15:601:940 + rtc_cmos 00:05: setting system clock to 2011-10-16 14:57:54 UTC (1318777074) BIOS EDD facility v0.16 2004-Jun-25, 0 devices found EDD information not available. - Freeing unused kernel memory: 720k freed - Write protecting the kernel text: 5352k - Write protecting the kernel read-only data: 2192k - NX-protecting the kernel data: 4888k - <30>udev[76]: starting version 167 - input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 - md: linear personality registered for level -1 - md: multipath personality registered for level -4 - md: raid0 personality registered for level 0 - md: raid1 personality registered for level 1 - xhci_hcd 0000:03:00.0: PCI INT A -> GSI 50 (level, low) -> IRQ 50 - xhci_hcd 0000:03:00.0: setting latency timer to 64 - xhci_hcd 0000:03:00.0: xHCI Host Controller - xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 8 - async_tx: api initialized (async) - xor: automatically using best checksumming function: pIII_sse + Freeing unused kernel memory: 700k freed + Write protecting the kernel text: 5192k + Write protecting the kernel read-only data: 2148k r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded r8169 0000:02:00.0: PCI INT A -> GSI 44 (level, low) -> IRQ 44 r8169 0000:02:00.0: setting latency timer to 64 r8169 0000:02:00.0: (unregistered net_device): unknown MAC, using family default r8169 0000:02:00.0: irq 72 for MSI/MSI-X - r8169 0000:02:00.0: eth0: RTL8168b/8111b at 0xf8438000, 14:da:e9:03:e9:b7, XID 0c900800 IRQ 72 - ahci 0000:00:11.0: version 3.0 - ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 - ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode - ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part - scsi0 : ahci - scsi1 : ahci - scsi2 : ahci - scsi3 : ahci - scsi4 : ahci - scsi5 : ahci - ata1: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b100 irq 19 - ata2: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b180 irq 19 - ata3: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b200 irq 19 - ata4: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b280 irq 19 - ata5: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b300 irq 19 - ata6: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b380 irq 19 - pIII_sse : 12815.000 MB/sec - xor: using function: pIII_sse (12815.000 MB/sec) - usb 3-2: new high speed USB device using ehci_hcd and address 2 - xhci_hcd 0000:03:00.0: irq 50, io mem 0xfe900000 - xhci_hcd 0000:03:00.0: irq 73 for MSI/MSI-X - xhci_hcd 0000:03:00.0: irq 74 for MSI/MSI-X - xhci_hcd 0000:03:00.0: irq 75 for MSI/MSI-X - xhci_hcd 0000:03:00.0: irq 76 for MSI/MSI-X - xhci_hcd 0000:03:00.0: irq 77 for MSI/MSI-X - xhci_hcd 0000:03:00.0: irq 78 for MSI/MSI-X - xhci_hcd 0000:03:00.0: irq 79 for MSI/MSI-X - usb usb8: No SuperSpeed endpoint companion for config 1 interface 0 altsetting 0 ep 129: using minimum values - xHCI xhci_add_endpoint called for root hub - xHCI xhci_check_bandwidth called for root hub - hub 8-0:1.0: USB hub found - hub 8-0:1.0: 4 ports detected - Refined TSC clocksource calibration: 3210.781 MHz. + input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 + r8169 0000:02:00.0: eth0: RTL8168b/8111b at 0xf800e000, 14:da:e9:03:e9:b7, XID 0c900880 IRQ 72 + Refined TSC clocksource calibration: 3210.793 MHz. Switching to clocksource tsc - usbcore: registered new interface driver uas - ata6: SATA link down (SStatus 0 SControl 300) - ata4: SATA link down (SStatus 0 SControl 300) - ata3: SATA link down (SStatus 0 SControl 300) - ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) - ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) - ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) - ata5.00: ATA-7: HDS725050KLA360, K2AOAH0A, max UDMA/133 - ata5.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA - ata5.00: configured for UDMA/133 - ata1.00: ATA-8: WDC WD3000HLFS-01G6U4, 04.04V06, max UDMA/133 - ata1.00: 586072368 sectors, multi 16: LBA48 NCQ (depth 31/32), AA - ata2.00: ATA-8: WDC WD3000HLFS-01G6U4, 04.04V06, max UDMA/133 - ata2.00: 586072368 sectors, multi 16: LBA48 NCQ (depth 31/32), AA - ata1.00: configured for UDMA/133 - scsi 0:0:0:0: Direct-Access ATA WDC WD3000HLFS-0 04.0 PQ: 0 ANSI: 5 - sd 0:0:0:0: Attached scsi generic sg0 type 0 - sd 0:0:0:0: [sda] 586072368 512-byte logical blocks: (300 GB/279 GiB) - sd 0:0:0:0: [sda] Write Protect is off - sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 - sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA - ata2.00: configured for UDMA/133 - scsi 1:0:0:0: Direct-Access ATA WDC WD3000HLFS-0 04.0 PQ: 0 ANSI: 5 - sd 1:0:0:0: Attached scsi generic sg1 type 0 - sd 1:0:0:0: [sdb] 586072368 512-byte logical blocks: (300 GB/279 GiB) - sd 1:0:0:0: [sdb] Write Protect is off - sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 - sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA - scsi 4:0:0:0: Direct-Access ATA HDS725050KLA360 K2AO PQ: 0 ANSI: 5 - sd 4:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB) - sd 4:0:0:0: Attached scsi generic sg2 type 0 - sd 4:0:0:0: [sdc] Write Protect is off - sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00 - sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA - sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 - sd 0:0:0:0: [sda] Attached SCSI disk - sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7 - sd 1:0:0:0: [sdb] Attached SCSI disk - sdc: sdc1 sdc2 sdc4 - sd 4:0:0:0: [sdc] Attached SCSI disk + vga16fb: initializing + vga16fb: mapped to 0xc00a0000 + Console: switching to colour frame buffer device 80x30 + fb0: VGA16 VGA frame buffer device Initializing USB Mass Storage driver... - scsi6 : usb-storage 3-2:1.0 usbcore: registered new interface driver usb-storage USB Mass Storage support registered. - raid6: int32x1 1564 MB/s - md: bind<sdb3> - md: bind<sdb4> - md: bind<sdb5> - raid6: int32x2 1621 MB/s - md: bind<sdb6> - raid6: int32x4 1233 MB/s - raid6: int32x8 954 MB/s - raid6: mmxx1 2958 MB/s - raid6: mmxx2 5559 MB/s - raid6: sse1x1 2490 MB/s - raid6: sse1x2 3934 MB/s - raid6: sse2x1 4696 MB/s - raid6: sse2x2 7811 MB/s - raid6: using algorithm sse2x2 (7811 MB/s) - md: raid6 personality registered for level 6 - md: raid5 personality registered for level 5 - md: raid4 personality registered for level 4 - md: raid10 personality registered for level 10 - md: bind<sda6> - bio: create slab <bio-1> at 1 - md/raid10:md124: active with 2 out of 2 devices - md124: detected capacity change from 0 to 233556410368 - md124: unknown partition table - EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null) - md: bind<sda4> - md/raid10:md126: active with 2 out of 2 devices - md126: detected capacity change from 0 to 17453285376 - md: bind<sda5> - md: md123 stopped. - md: unbind<sda5> - md: export_rdev(sda5) - md: array md127 already has disks! - scsi 6:0:0:0: Direct-Access WG Corner Office 8.02 PQ: 0 ANSI: 0 CCS - sd 6:0:0:0: Attached scsi generic sg3 type 0 - sd 6:0:0:0: [sdd] 3907583 512-byte logical blocks: (2.00 GB/1.86 GiB) - sd 6:0:0:0: [sdd] Write Protect is off - sd 6:0:0:0: [sdd] Mode Sense: 45 00 00 08 - sd 6:0:0:0: [sdd] Assuming drive cache: write through - sd 6:0:0:0: [sdd] Assuming drive cache: write through - sdd: sdd1 - sd 6:0:0:0: [sdd] Assuming drive cache: write through - sd 6:0:0:0: [sdd] Attached SCSI removable disk - <30>udev[376]: starting version 167 - <30>udev[392]: renamed network interface eth0 to eth2 - md126: unknown partition table - Adding 4000180k swap on /dev/sdc4. Priority:-1 extents:1 across:4000180k - type=1400 audit(1315435938.465:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=523 comm="apparmor_parser" - type=1400 audit(1315435938.465:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=532 comm="apparmor_parser" - type=1400 audit(1315435938.465:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=523 comm="apparmor_parser" - type=1400 audit(1315435938.465:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=532 comm="apparmor_parser" - type=1400 audit(1315435938.465:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=523 comm="apparmor_parser" - type=1400 audit(1315435938.465:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=532 comm="apparmor_parser" - md: bind<sda5> - md/raid10:md125: active with 2 out of 2 devices - md125: detected capacity change from 0 to 34907881472 - md125: unknown partition table - md: bind<sda3> - md/raid1:md127: active with 2 out of 2 mirrors - md127: detected capacity change from 0 to 1090453504 - md127: unknown partition table - lp: driver loaded but no devices found - piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 - SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01 - SP5100 TCO timer: mmio address 0xbafe00 already in use - input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input3 - fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. - Disabling lock debugging due to kernel taint - [fglrx] Maximum main memory to use for locked dma buffers: 3769 MBytes. - [fglrx] vendor: 1002 device: 6758 count: 1 - [fglrx] ioport: bar 4, base 0xe000, size: 0x100 - pci 0000:01:00.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24 - pci 0000:01:00.0: setting latency timer to 64 - [fglrx] Kernel PAT support is enabled - [fglrx] module loaded - fglrx 8.84.60 [Mar 24 2011] with 1 minors - HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 - hda-intel: Enable sync_write for AMD chipset - hda_codec: ALC887-VD: BIOS auto-probing. - input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input4 - HDA Intel 0000:01:00.1: PCI INT B -> GSI 25 (level, low) -> IRQ 25 - HDA Intel 0000:01:00.1: irq 80 for MSI/MSI-X - HDA Intel 0000:01:00.1: setting latency timer to 64 - hda-intel: Enable sync_write for AMD chipset - EXT4-fs (sdc1): re-mounted. Opts: errors=remount-ro - input: ImExPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input5 - EXT4-fs (sdc2): mounted filesystem with ordered data mode. Opts: (null) - type=1400 audit(1315435941.709:8): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=1005 comm="apparmor_parser" - type=1400 audit(1315435941.709:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1010 comm="apparmor_parser" - type=1400 audit(1315435941.709:10): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1010 comm="apparmor_parser" - type=1400 audit(1315435941.709:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/freshclam" pid=1009 comm="apparmor_parser" - r8169 0000:02:00.0: eth2: link down - r8169 0000:02:00.0: eth2: link down - ADDRCONF(NETDEV_UP): eth2: link is not ready - ppdev: user-space parallel port driver - fglrx_pci 0000:01:00.0: irq 81 for MSI/MSI-X - [fglrx] Firegl kernel thread PID: 1375 - [fglrx] Firegl kernel thread PID: 1376 - [fglrx] Firegl kernel thread PID: 1377 - [fglrx] IRQ 81 Enabled - [fglrx] Gart USWC size:1280 M. - [fglrx] Gart cacheable size:508 M. - [fglrx] Reserved FB block: Shared offset:0, size:1000000 - [fglrx] Reserved FB block: Unshared offset:f8fd000, size:403000 - [fglrx] Reserved FB block: Unshared offset:3fff4000, size:c000 - EXT4-fs (sdc1): re-mounted. Opts: errors=remount-ro,commit=0 - EXT4-fs (sdc2): re-mounted. Opts: commit=0 - r8169 0000:02:00.0: eth2: link up - ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready - hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj. - EXT4-fs (sdc1): re-mounted. Opts: errors=remount-ro,commit=0 - EXT4-fs (sdc2): re-mounted. Opts: commit=0 - eth2: no IPv6 routers present - usb 3-2: USB disconnect, address 2 - usb 4-1: new full speed USB device using ohci_hcd and address 2 - input: Razer Razer Copperhead Laser Mouse as /devices/pci0000:00/0000:00:12.0/usb4/4-1/4-1:1.0/input/input6 - generic-usb 0003:1532:0101.0001: input,hidraw0: USB HID v10.01 Mouse [Razer Razer Copperhead Laser Mouse] on usb-0000:00:12.0-1/input0 - input: Razer Razer Copperhead Laser Mouse as /devices/pci0000:00/0000:00:12.0/usb4/4-1/4-1:1.1/input/input7 - generic-usb 0003:1532:0101.0002: input,hidraw1: USB HID v10.01 Keyboard [Razer Razer Copperhead Laser Mouse] on usb-0000:00:12.0-1/input1 - usbcore: registered new interface driver usbhid - usbhid: USB HID core driver - - - + Intel ISA PCIC probe: not found. + r8169 0000:02:00.0: eth0: link down + r8169 0000:02:00.0: eth0: link down + ADDRCONF(NETDEV_UP): eth0: link is not ready + r8169 0000:02:00.0: eth0: link down + ADDRCONF(NETDEV_UP): eth0: link is not ready + r8169 0000:02:00.0: eth0: link up + ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready + usb 3-2: new high speed USB device using ehci_hcd and address 2 + scsi0 : usb-storage 3-2:1.0 + scsi 0:0:0:0: Direct-Access Ut163 USB2FlashStorage 0.00 PQ: 0 ANSI: 2 + sd 0:0:0:0: Attached scsi generic sg0 type 0 + sd 0:0:0:0: [sda] 983808 512-byte logical blocks: (503 MB/480 MiB) + sd 0:0:0:0: [sda] Write Protect is off + sd 0:0:0:0: [sda] Mode Sense: 00 00 00 00 + sd 0:0:0:0: [sda] Asking for cache data failed + sd 0:0:0:0: [sda] Assuming drive cache: write through + sd 0:0:0:0: [sda] Asking for cache data failed + sd 0:0:0:0: [sda] Assuming drive cache: write through + sda: sda1 + sd 0:0:0:0: [sda] Asking for cache data failed + sd 0:0:0:0: [sda] Assuming drive cache: write through + sd 0:0:0:0: [sda] Attached SCSI removable disk
